Summary of the content on the page No. 1
Wireless Router RNX-N4
User Manual
Summary of the content on the page No. 2
Wireless Adapter RNX-N4 User Manual 1. Introduction......................................................................................................4 1.1 FEATURES & BENEFITS ..............................................................................................................4 1.2 PACKAGE CONTENTS ........................................................
Summary of the content on the page No. 3
Wireless Adapter RNX-N4 User Manual 6.3.3 Special Applications ................................................................................................... 50 6.3.4 Port Forwarding .......................................................................................................... 51 6.3.5 StreamEngine .....................................................
Summary of the content on the page No. 4
Wireless Adapter RNX-N4 User Manual 1. INTRODUCTION The Wireless-N Gigabit Router is a draft 802.11n compliant device that delivers up to 6x faster speeds than 802.11g while staying backward compatible with 802.11g and 802.11b devices. It is not only a Wireless Access Point, which lets you connect to the network without wires. There's also a built-in 4-port full-
Summary of the content on the page No. 5
Wireless Adapter RNX-N4 User Manual Support 802.1x authenticator, 802.11i Provide mutual authentication (Client and (WPA/WPA2, AES), VPN pass-thru dynamic encryption keys to enhance mechanisms security WDS (Wireless Distribution System) Make wireless AP and Bridge mode simultaneously as a wireless repeater Universal Plug and Play (UPnP™) Works with most Internet gami
Summary of the content on the page No. 6
Wireless Adapter RNX-N4 User Manual 1.4 WIRELESS SOHO ROUTER DESCRIPTION Rear Panel Antenna Antenna Antenna Connector Connector Connector SMA SMA SM SMA A SM SM SMA SMA A A SMA SMA SM SMA A DC DC J JA ACK CK DC JACK DC JACK WA WA WA WAN N N N LAN: 4*RJ45 LAN: 4*RJ45 LAN: 4*R LAN: 4*RJ J45 45 10 10/100 /100/1 /100 000M 0M 10 10/1 /100 00/100 /1000M 0M WA
Summary of the content on the page No. 7
Wireless Adapter RNX-N4 User Manual device will automatically synchronize with other wireless devices on your network that support Wi-Fi Protected Setup. 1.5 SYSTEM REQUIREMENTS The following are the minimum system requirements in order configure the device. • PC/AT compatible computer with a Ethernet interface. • Operating system that supports HTTP web-browse
Summary of the content on the page No. 8
Wireless Adapter RNX-N4 User Manual This is the simplest network configuration with several computers equipped with the PC Cards that form a wireless network whenever they are within range of one another. In ad- hoc mode, each client is peer-to-peer, would only have access to the resources of the other client and does not require an access point. This is the easiest and
Summary of the content on the page No. 9
Wireless Adapter RNX-N4 User Manual 2. UNDERSTANDING THE HARDWARE 2.1 HARDWARE INSTALLATION • Place the unit in an appropriate location after conducting a site survey. • Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC/Notebook. • Plug one end of another Ethernet cable to WAN port of the device and the other end int
Summary of the content on the page No. 10
Wireless Adapter RNX-N4 User Manual • Select Internet Protocol (TCP/IP) and then click on the Properties button. This will allow you to configure the TCP/IP settings of your PC/Notebook. • Select Use the following IP Address radio button and then enter the IP address and subnet mask. Ensure that the IP address and subnet mas
Summary of the content on the page No. 11
Wireless Adapter RNX-N4 User Manual 3. INTERNET CONNECTION WIZARD This device offers a quick and simple configuration through the use of wizards. This chapter describes how to use the wizard to configure the WAN, LAN, and wireless settings. Please refer to Chapter 6 in order to configure the more advanced features of the device. 3.1 LOGGING IN • To configure
Summary of the content on the page No. 12
Wireless Adapter RNX-N4 User Manual • Click on the Internet Connection Setup Wizard Setup button to begin the process. • The Wizard requires that you configure the password, time zone, and Internet (WAN) connection. Click on the Next button to continue. • By default, the device does not use a password. Specify a password for administrator a
Summary of the content on the page No. 13
Wireless Adapter RNX-N4 User Manual • Select your time zone from the drop-down list Click on the Next button to continue. • The next step in the wizard is the Internet Connection, select the WAN connection type from the list, and then click on the Next button to continue with the wizard. 3.1.1 DHCP Connection (Dynamic IP Address) • The WAN inter
Summary of the content on the page No. 14
Wireless Adapter RNX-N4 User Manual • You have the option of cloning your PCs MAC address onto the device. Click on the Clone Your PCs MAC Address to automatically copy the MAC address. You may also specify a host name. Click on the Next button to continue. • The WAN configuration is complete. Click on the Connect button to connect to the Internet.
Summary of the content on the page No. 15
Wireless Adapter RNX-N4 User Manual • Select the Username / Password Connection (PPPoE) radio button and then click on the Next button. • Address Mode: PPPoE can be used with a dynamic or static IP address. If you select the Dynamic IP radio button, then the IIP address in the next field is not required. However, if you select the Static IP radio bu
Summary of the content on the page No. 16
Wireless Adapter RNX-N4 User Manual again in the next field. • Service Name: Specify the name of the ISP. • Click on the Next button to continue. • The WAN configuration is complete. Click on the Connect button to connect to the Internet. 3.1.3 PPTP (Point-to-Point Tunneling Protocol) • The WAN interface can be configured as PPTP. PPTP (Point to Poi
Summary of the content on the page No. 17
Wireless Adapter RNX-N4 User Manual • Select the Username / Password Connection (PPTP) radio button and then click on the Next button. • Address Mode: PPTP can be used with a dynamic or static IP address. If you select the Dynamic IP radio button, then the IIP address in the next field is not required. However, if you select the Static IP radio button
Summary of the content on the page No. 18
Wireless Adapter RNX-N4 User Manual • The WAN configuration is complete. Click on the Connect button to connect to the Internet. 3.1.4 L2TP (Layer 2 Tunneling Protocol) The WAN interface can be configured as L2TP. L2TP (Layer Two Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection requires you to enter a user
Summary of the content on the page No. 19
Wireless Adapter RNX-N4 User Manual • Address Mode: L2TP can be used with a dynamic or static IP address. If you select the Dynamic IP radio button, then the IIP address in the next field is not required. However, if you select the Static IP radio button, then the IP address in the next field is required. • L2TP Address: Specify the IP address • L2TP Subnet M
Summary of the content on the page No. 20
Wireless Adapter RNX-N4 User Manual your ISP provides you with a dedicated IP address (which does not change as DHCP). • Select the Static IP Address Connection radio button and then click on the Next button. • IP Address: Specify the IP address for this device, which is assigned by your ISP. • Subnet Mask: Specify the subnet mask for this IP ad
