Summary of the content on the page No. 1
PCA7429G02
PROM Programming Adapter for M37272E8SP/M37272EFSP
User's Manual
Rev.1.00
September 1, 2003
REJ10J0249-0100Z
Summary of the content on the page No. 2
• Microsoft, MS, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation. • IBM, AT, PS/2 and OS/2 are registered trademarks of International Business Machines Corporation. • IC61-080-081, IC61-080-046 and IC61-080-079 are products of Yamaichi Electronics Co., Ltd. • AXS4803M19 and AXS4802M1 are products of Matsushita Electric Works, Ltd. • HQPACK, NQPACK, TQPACK, YQPACK, YQSOCKET and YQ-Guide are products of Tokyo Eletech Corporation. Keep safety first in your circuit
Summary of the content on the page No. 3
Contents 1. Precautions for Safety.........................................................................................................4 1.1 Safety Symbols and Meanings ..............................................................................4 2. Introduction ........................................................................................................................6 2.1 Things to Check When Unpacking .......................................................................6 3
Summary of the content on the page No. 4
Chapter 1. Precautions for Safety In both the user's manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. 1.1 Safety Symbols and Meanings If the requirements shown in the "WARNING" sentences are ignored,
Summary of the content on the page No. 5
WARNING Warnings for Use Environment: • This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care should be taken that this temperature is not exceeded. • Select the proper programming mode of the PROM programmer. CAUTION Cautions to Be Taken for This Product: • Do not disassemble or modify this product. Disassembling or modifying this product can cause damage. Disassembling and modifying the product will void your warranty. • Use caution when handling this
Summary of the content on the page No. 6
2. Introduction This product is a PROM programming adapter for 8-bit microcomputers of 7200 Series. The adapter is a tool that can be used to write a program into internal ROM of microcomputers using a commercially available PROM programmer. This manual describes the specifications and operational procedures of PCA7429G02. Figure 2.1 shows the external view of the PCA7429G02 and its constituent parts. Figure 2.1 External view and constituent parts of PCA7429G02 2.1 Things to Check When Unpacking
Summary of the content on the page No. 7
3. Specifications Table 3.1 lists specifications of the PCA7429G02. Table 3.1 Specifications of PCA7429G02 MCU type M37272E8SP, M37272EFSP 8MHz Operating clock frequency (Supplied by the ceramic oscillator mounted on the adapter) Power supply Supplied from V of PROM programmer CC MCU socket IC59-4206-G4 (Yamaichi Electronics Co., Ltd.) Board to insert the programmable MCU PCA7429G02 (IC socket is mounted on this board.) Board configuration Board to connect to the PROM programmer PCA7402E (Stand
Summary of the content on the page No. 8
4. How to Write the Program This chapter describes procedures you need to follow when writing a program. For details on how to operate the PROM programmer, refer to the user's manual included with the PROM programmer. 4.1 Programming Procedure Follow procedures (1) to (8) to write a program. (1) Read the program. Read the program into the PROM programmer. (2) Attach the adapter to the PROM programmer. (see section 4.2) (3) Set the jumper switch (SW1). (see Section 4.3) (4) Insert the MCU into th
Summary of the content on the page No. 9
4.2 Attaching Adapter to PROM Programmer As shown in Figure 4.1, attach the adapter's bottom board (PCA7402E) to the IC socket of PROM programmer, with the pin No. 1 of the adapter matched to the pin No. 1 of the IC socket . Be careful when attaching to the PROM programmer because incorrect insertion can cause fatal damage to the MCU. Figure 4.1 Attaching adapter to PROM programmer ( 9 / 16 )
Summary of the content on the page No. 10
4.3 Setting Jumper Switches Switch settings for SW1 is shown in Table 4.1 and Figure 4.2 below. Table 4.1 Switch settings for SW1 SW1 MCU type name M37272E8SP E8 EF M37272EFSP Figure 4.2 Switch settings for SW1 4.4 Inserting MCU into Adapter As shown in Figure 4.3 insert the MCU into the IC socket, with the pin No. 1 of the MCU matched to the pin No. 1 of the IC socket on the adapter. Be careful when inserting the MCU because incorrect insertion can cause fatal damage to the MCU. Figure 4.3 Inse
Summary of the content on the page No. 11
4.5 Precautions When Handling Adapter Don't touch the connector in the IC socket and the pins on the PROM programmer connector. Otherwise it can cause an electrical insulation failure because of dirt. When not using, attach the connector pins of this product to the conductive sponge as it was shipped from the factory. 4.6 Setting Programming Area Always be sure to specify the programming area before writing the program into the MCU. This is also required for devices programmed using a PROM progr
Summary of the content on the page No. 12
6. Memory Map Figures 6.1 and 6.2 show the MCU and the PROM programmer memory maps (programming areas). 00000 00000 16 16 013FF 013FF 16 16 01400 01400 16 16 OSD ROM OSD ROM 256 kinds 256 kinds 03BFF16 03BFF 16 03C00 16 03C00 16 07FFF 16 07FFF 16 08000 16 08000 16 Internal Programming ROM area area (32K bytes) 0FFFF 0FFFF 16 16 10000 16 1FFFF 16 MCU PROM programmer (M37272E8SP) (M5M27C101 mode) Figure 6.1 Memory map (M37272E8SP) ( 12 / 16 )
Summary of the content on the page No. 13
00000 00000 16 16 00FFF 00FFF 16 16 01000 16 0100016 Internal Programming ROM area area (60K bytes) 0FFFF 0FFFF 16 16 10000 10000 16 16 113FF 113FF 16 16 1140016 11400 16 OSD ROM OSD ROM 256 kinds 256 kinds 13BFF 16 13BFF 16 13C00 16 13C00 16 1FFFF 1FFFF 16 16 PROM programmer MCU (M5M27C101 mode) (M37272EFSP) Figure 6.2 Memory map (M37272EFSP) ( 13 / 16 )
Summary of the content on the page No. 14
7. How to Request for Support After checking this manual, fill in the following information and email to your local distributor. For prompt response, please specify the following information: (1) Contact address • Company name •Department • Responsible person • Phone number • Fax number • E-mail address (2) Product information • Name of the programming adapter • Serial number • Date of purchase • Target MCU • Symptoms (Fails blank check/Cannot write a program/Fails verification etc.) • Detailed
Summary of the content on the page No. 15
PCA7429G02 User's Manual Rev.1.00 September 1, 2003 REJ10J0249-0100Z COPYRIGHT ©2003 RENESAS TECHNOLOGY CORPORATION AND RENESAS SOLUTIONS CORPORATION ALL RIGHTS RESERVED
Summary of the content on the page No. 16
