Summary of the content on the page No. 1
REJ09B0023-0400
SH7641
32
Hardware Manual
Renesas 32-Bit RISC Microcomputer
SuperH™ RISC engine Family / SH7641 Series
SH7641 HD6417641
Rev.4.00
Revision Date: Sep. 14, 2005
Summary of the content on the page No. 2
Rev. 4.00 Sep. 14, 2005 Page ii of l
Summary of the content on the page No. 3
Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammabl
Summary of the content on the page No. 4
General Precautions on Handling of Product 1. Treatment of NC Pins Note: Do not connect anything to the NC pins. The NC (not connected) pins are either not connected to any of the internal circuitry or are used as test pins or to reduce noise. If something is connected to the NC pins, the operation of the LSI is not guaranteed. 2. Treatment of Unused Input Pins Note: Fix all unused input pins to high or low level. Generally, the input pins of CMOS products are high-impedance input pins.
Summary of the content on the page No. 5
Important Notice on the Quality Assurance for this LSI Although the wafer process and assembly process of this LSI are entrusted to the external silicon foundries, the quality of this LSI is guaranteed for the customers under the quality assurance system of our company. However, if it is clear that our company is responsible for a defective product, we will only offer, after the agreement of both parties, to exchange it with a new product from stock. The following shows the robustness (ref
Summary of the content on the page No. 6
Configuration of This Manual This manual comprises the following items: 1. General Precautions on Handling of Product 2. Configuration of This Manual 3. Preface 4. Contents 5. Overview 6. Description of Functional Modules • CPU and System-Control Modules • On-Chip Peripheral Modules The configuration of the functional description of each module differs according to the module. However, the generic style includes the following items: i) Feature ii) Input/Output Pin iii) Register Des
Summary of the content on the page No. 7
Rev. 4.00 Sep. 14, 2005 Page vii of l
Summary of the content on the page No. 8
Preface The SH7641 RISC (Reduced Instruction Set Computer) microcomputer includes a Renesas Technology original RISC CPU as its core, and the peripheral functions required to configure a system. Target Users: This manual was written for users who will be using this LSI in the design of application systems. Users of this manual are expected to understand the fundamentals of electrical circuits, logical circuits, and microcomputers. Objective: This manual was written to explain the hardware
Summary of the content on the page No. 9
Rules: Register name: The following notation is used for cases when the same or a similar function, e.g. serial communication, is implemented on more than one channel: XXX_N (XXX is the register name and N is the channel number) Bit order: The MSB (most significant bit) is on the left and the LSB (least significant bit) is on the right. Number notation: Binary is B'xxxx, hexadecimal is H'xxxx, decimal is xxxx. Signal notation: An overbar is added to a low-active signal: xxxx Relate
Summary of the content on the page No. 10
Abbreviations ADC Analog to digital converter ALU Arithmetic logic unit bpp bits per pixel bps bits per second BSC Bus state controller CODEC Coder-decoder CPG Clock pulse generator CPU Central processing unit CRC Cyclic redundancy check DMAC Direct memory access controller DSP Digital signal processor ESD Electrostatic discharge ECC Error checking and correction etu Elementary time unit FIFO First-in first-out Hi-Z High impedance H-UDI User debugging interface INTC Interrupt c
Summary of the content on the page No. 11
USB Universal serial bus WDT Watch dog timer Rev. 4.00 Sep. 14, 2005 Page xi of l
Summary of the content on the page No. 12
Rev. 4.00 Sep. 14, 2005 Page xii of l
Summary of the content on the page No. 13
Contents Section 1 Overview................................................................................................1 1.1 Features.................................................................................................................................. 1 1.2 Block Diagram....................................................................................................................... 7 1.3 Pin Assignments..................................................................
Summary of the content on the page No. 14
3.1.5 Shift Operations.................................................................................................... 109 3.1.6 Most Significant Bit Detection Operation ............................................................ 112 3.1.7 Rounding Operation.............................................................................................. 115 3.1.8 Overflow Protection.............................................................................................. 117 3.1.9 Data
Summary of the content on the page No. 15
6.2 Register Descriptions......................................................................................................... 166 6.2.1 Standby Control Register (STBCR)...................................................................... 166 6.2.2 Standby Control Register 2 (STBCR2)................................................................. 167 6.2.3 Standby Control Register 3 (STBCR3)................................................................. 168 6.2.4 Standby Control Regi
Summary of the content on the page No. 16
9.1.1 TRAPA Exception Register (TRA) ...................................................................... 198 9.1.2 Exception Event Register (EXPEVT)................................................................... 199 9.1.3 Interrupt Event Register 2 (INTEVT2)................................................................. 199 9.2 Exception Handling Function ............................................................................................ 200 9.2.1 Exception Handling Flow ..
Summary of the content on the page No. 17
10.6.2 Timing to Clear an Interrupt Source ..................................................................... 240 Section 11 User Break Controller (UBC) ..........................................................241 11.1 Features.............................................................................................................................. 241 11.2 Register Descriptions......................................................................................................... 2
Summary of the content on the page No. 18
12.4.4 SDRAM Control Register (SDCR)....................................................................... 314 12.4.5 Refresh Timer Control/Status Register (RTCSR)................................................. 317 12.4.6 Refresh Timer Counter (RTCNT)......................................................................... 319 12.4.7 Refresh Time Constant Register (RTCOR) .......................................................... 319 12.4.8 Reset Wait Counter (RWTCNT) ....................
Summary of the content on the page No. 19
Section 14 U Memory........................................................................................451 14.1 Features.............................................................................................................................. 451 14.2 U Memory Access from CPU ............................................................................................ 452 14.3 U Memory Access from DSP....................................................................................
Summary of the content on the page No. 20
2 16.3.9 I C Bus Shift Register (ICDRS)............................................................................ 487 16.3.10 NF2CYC Register (NF2CYC).............................................................................. 487 16.4 Operation ........................................................................................................................... 488 2 16.4.1 I C Bus Format................................................................................................
