Renesas Emulator MCU Board M38D29T2-RLFS user manual

Summary of the content on the page No. 1

M38D29T2-RLFS
Emulator MCU Board for 38D2 Group
User’s Manual




If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.


Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
Jan. 10, 2008
(1/4)
REJ10J1789-0100

Summary of the content on the page No. 2

1. Outline The M38D29T2-RLFS is an emulator MCU board for the 38D2 Group. 2. Package Components (1) M38D29T2-RLFS 1 pc. (2) M38D29T2-RLFS User's Manual (This manual) 1 pc. (3) M38D29T2-RLFS User's Manual (Japanese) 1 pc. The M3T-F160-64NSA is included with the M38D29T2-RLFS-FP. The M3T-F160-64NSD is included with the M38D29T2-RLFS-HP. For details on the M3T-F160-64NSA and M3T-F160-64NSD, refer to each user’s manual. 3. Specifications Table 1 Specifications M38000T2-CPE

Summary of the content on the page No. 3

5. Connection Procedure (1) For M38D29T2-RLFS-FP 1 Mount the NQPACK064SA160 to the foot pattern of the user system. 2 Attach the included M3T-F160-64NSA to the M38D29T2-RLFS. 3 Mount the YQPACK064SA on the NQPACK064SA160. 4 Attach the tip of the probe of the emulator to the M38D29T2-RLFS, and connect the M38D29T2-RLFS and YQPACK064SA. (2) For M38D29T2-RLFS-HP 1 Mount the NQPACK064SD-ND to the foot pattern of the user system. 2 Attach the included M3T-F160-64NSD to the M38D29T2-RLFS

Summary of the content on the page No. 4

7. Oscillator Circuit This product has two oscillator circuit patterns for the main clock XIN and sub-clock XCIN. Figures 6 and 7 show the oscillator circuit diagram and oscillator circuit pattern, respectively. Select one of them according to the oscillator circuitry of the user system. (1) When using the internal oscillator circuit of the MCU: The oscillator circuit on the user system may not oscillate because a converter board is used between the emulator MCU and the user system. In