Renesas Direct Dummy IC M3T-DIRECT80S user manual

Summary of the content on the page No. 1

M3T-DIRECT80S
Direct Dummy IC for 80-pin 0.65mm pitch QFP
User’s Manual



If the requirements shown in the "CAUTION" sentences are ignored,
CAUTION
the equipment may cause personal injury or damage to the products.



Renesas Tools Homepage http://www.renesas.com/tools

Rev.2.00
Aug. 01, 2007
REJ10J0335-0200
(1/4)

Summary of the content on the page No. 2

1. Description This accessory tool connects an emulation pod and the target. It can be mounted on the same foot pattern as the MCU housed in the 80-pin 0.65mm pitch QFP. It is applicable to the M16C and 740 Family, etc. 2. Package Components (see Figure 1) (1) DIRECT80S main unit (16.8x16.8mm) (2) DIRECT80S User's Manual (this manual) 3. Specifications M3T-DIRECT80S main unit Figure 1 Package components of M3T-DIRECT80S Table 1 Specifications Item Description : position of No 1 pin 8 Be

Summary of the content on the page No. 3

6. Precautions CAUTION Caution To Be Taken for This Product: • Before mounting the M3T-DIRECT80S, be sure to check the pin positions. IMPORTANT Notes for This Product: • We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools 7. External Dimensions of M3T-DIRECT80S A Symbol Dimension [mm] D 80 61 A 4.9 D 16.8 1 50150 60 1 16.8 E e 0.65 M 6.3 1 50 1 50 Upper con

Summary of the content on the page No. 4

8. Correspondence of Connectors J1 and J2 Table 2 lists the correspondence of M3T-DIRECT80S and connectors J1, J2. Table 2 Correspondence of M3T-DIRECT80S and connectors J1, J2 Connector DIRECT80S Connector DIRECT80S Connector DIRECT80S Connector DIRECT80S pin No. pin No. pin No. pin No. pin No. pin No. pin No. pin No. J1-1 J1-26 NC J2-1 79 J2-26 23 63 64 J1-27 J2-2 J2-27 39 80 24 J1-2 65 J1-28 40 J2-3 J2-28 25 J1-3 1 66 J1-29 41 J2-4 J2-29 26 J1-4 2 67 J1-30 J2-5 J2-30 42 27 J1-5 3 68 J1-31 J2