Summary of the content on the page No. 1
IPmux-1, IPmux-1E
TDMoIP Gateways
Installation and Operation Manual
Notice
This manual contains information that is proprietary to RAD Data Communications. No part of this
publication may be reproduced in any form whatsoever without prior written approval by RAD Data
Communications.
No representation or warranties for fitness for any purpose other than what is specifically mentioned in
this manual is made either by RAD Data Communications or its agents.
For furth
Summary of the content on the page No. 2
Warranty This RAD product is warranted against defects in material and workmanship for a period of one year from date of shipment. During the warranty period, RAD will, at its option, either repair or replace products which prove to be defective. For warranty service or repair, this product must be returned to a service facility designated by RAD. Buyer shall prepay shipping charges to RAD and RAD shall pay shipping charges to return the product to Buyer. However, Buyer shall pay all sh
Summary of the content on the page No. 3
Safety Warnings The exclamation point within a triangle is intended to warn the operator or service personnel of operation and maintenance factors relating to the product and its operating environment which could pose a safety hazard. Always observe standard safety precautions during installation, operation and maintenance of this product. Only a qualified and authorized service personnel should carry out adjustment, maintenance or repairs to this instrument. No adjustment, mainten
Summary of the content on the page No. 4
Declaration of Conformity Manufacturer’s Name: RAD Data Communications Ltd. Manufacturer’s Address: 24 Raoul Wallenberg St. Tel Aviv 69719 Israel declares that the product: Product Name: IPmux-1 conforms to the following standard(s) or other normative document(s): EMC: EN 55022 (1998) Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement. EN 50024 (1998) Information technology equipment –Immunity characteristics – Limit
Summary of the content on the page No. 5
Contents Chapter 1. Introduction 1.1 Overview .......................................................................................................... 1-1 Versions...................................................................................................................1-1 Applications.............................................................................................................1-2 Features.......................................................................
Summary of the content on the page No. 6
Table of Contents Setting IPmux-1/1E Configuration Options..............................................................3-11 Performance Monitoring ........................................................................................3-13 Chapter 4. Troubleshooting and Diagnostics 4.1 Error Detection ................................................................................................. 4-1 Using Front Panel LEDs..................................................................
Summary of the content on the page No. 7
Table of Contents List of Figures 1-1. Multiplexing Voice and Data over an Ethernet Trunk................................................. 1-2 1-2. E1/T1 Circuit Extension over an IP Based Network .................................................... 1-3 1-3. Mixed BRI and POTS Support Application................................................................. 1-4 1-4. U Interface Concentration ........................................................................................
Summary of the content on the page No. 8
Table of Contents 3-14. Performance Monitoring Menu for IPmux-1E ISDN-S ............................................ 3-13 3-15. Performance Monitoring Menu for IPmux-1E FXS.................................................. 3-13 4-1. IPmux-1 External Loop .............................................................................................. 4-4 4-2. IPmux-1 Internal Loop............................................................................................... 4-4 4-3. IPm
Summary of the content on the page No. 9
Chapter 1 Introduction 1.1 Overview IPmux-1/1E offers a solution for extending traditional E1/T1, ISDN, or POTS TDM services transparently over the widely deployed IP networks. The device converts the data stream coming from its user ports into configurable sized IP packets that are extended over the Fast Ethernet port and vice versa. IPmux-1/1E offers end-to-end synchronization for voice applications. IPmux-1/1E also offers large buffers to compensate for the delay variation inserted
Summary of the content on the page No. 10
Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual Applications Typical IPmux-1/1E applications are shown with E1/T1, ISDN, and FXS interfaces. Figure 1-1 illustrates Multiplexing Voice and Data over an Ethernet Trunk. Figure 1-2 shows an E1/T1 circuit extension over an IP based Network. Figure 1-3 illustrates mixed BRI and POTS support application of V5.1 concentration of BRI remote terminals. Figure 1-4 shows mixed BRI and POTS support application of S/U interface co
Summary of the content on the page No. 11
IPmux-1/1E Installation and Operation Manual Chapter 1 Introduction 100 Mbps n ×E1/T1 PSTN IPmux-16 PBX or IPmux-4 Ethernet Switch Fractional IP Network 10/100 Mbps 100 Mbps E1/T1 Fiber PBX IPmux-1 Ethernet Public Internet Switch Fractional E1/T1 IPmux-1 PBX Figure 1-2. E1/T1 Circuit Extension over an IP Based Network Overview 1-3 Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com
Summary of the content on the page No. 12
Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual Megaplex For BRI Grooming E1 Link V5.1 E1 CAS For FXS Grooming Telephone Switch POTS POTS POTS Fast Ethernet IPmux-1 Switch POTS Network Computer Workstation ISDN Telephone ISDN Telephone Fast Ethernet Switch IPmux-1 ISDN Telephone ISDN Telephone Fast Ethernet IPmux-1 Switch ISDN Telephone Computer Computer ISDN Telephone Workstation Workstation Figure 1-3. Mixed BRI and POTS Support Application (V5.1 Concentration of BRI R
Summary of the content on the page No. 13
IPmux-1/1E Installation and Operation Manual Chapter 1 Introduction Megaplex For BRI Grooming TE U Ports E1 Link E1 CAS For FXS Grooming Telephone Switch Fast Ethernet POTS IPmux-1 Switch Network ISDN Telephone ISDN Telephone Fast Ethernet Switch IPmux-1 ISDN Telephone ISDN Telephone Fast Ethernet IPmux-1 Switch ISDN Telephone Computer Computer ISDN Telephone Workstation Workstation Figure 1-4. U Interface Concentration TE NT S ISDN Telephone Network ISDN Telephone PBX IPmux-1E IPmux-1E Co
Summary of the content on the page No. 14
Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual E1/T1 IPmux-1 ISDN FXS Phones IPmux-1E BRI Internet IPmux-1E Ethernet Switch IP Network Switch Telephony Switch IPmux-16 Figure 1-6. Ethernet-based Multi-tenant Application with Voice and Data Integrated Access Features IPmux-1/1E is a 1U high, easy-to-install standalone unit. A rack mount installation option is available. IPmux-1 can be ordered with AC or DC power supply. IPmux-1E is only available with AC power suppl
Summary of the content on the page No. 15
IPmux-1/1E Installation and Operation Manual Chapter 1 Introduction ISDN BRI IPmux-1E has 4-ports, S-interface only. Each port can be configured as either NT or TE (Network/User) by jumper and software; NT or TE is configured per device. IPmux-1E can be configured to 1, 2, 3 or 4 active ports. IPmux-1E works in transparent mode (no termination/compression of D channels). It operates opposite IPmux with E1/T1 and a Megaplex unit as a concentrator in transparent mode or opposite another IP
Summary of the content on the page No. 16
Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual Table 1-1. Fiber Options Interface Type Wavelength Optical Power Receive Optical Loss (nm) (dBm) Sensitivity Budget (dB/km) Min Max (dBm) (dB)* Min Max SC Multimode 1300 –20 –14 –31 8* 1 4 SC Single mode 1300 –20 –14 –31 8* 0.5 0.8 LC Multimode 1300 –19 –14 –32 10* 1 4 LC Single mode 1300 –15 –8 –32 14* 0.5 0.8 • Permitted fiber optic
Summary of the content on the page No. 17
IPmux-1/1E Installation and Operation Manual Chapter 1 Introduction Note IPmux E1/T1 working opposite IPmux-1E with BRI ports should work in Fractional E1/T1 mode (no CAS). When working opposite IPmux-1E with FXS, use E1/T1 CAS mode. QoS QoS support: • Labeling IP level priority (ToS) for TDMoIP packets • VLAN tagging and priority labeling according to IEEE 802.1p&q for TDMoIP packets. The user can configure the ToS (Type of Service) of the outgoing TDMoIP packets. This allows
Summary of the content on the page No. 18
Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual 1.2 Physical Description IPmux-1 is a 1U high 19-in (IPmux-1E is a 1U high ½ 19-in), easy-to-install standalone unit. A rack mounting kit option is available (ordered separately). Figure 1-7 shows a 3-dimensional view of IPmux-1; Figure 1-8 shows a 3-dimensional view of IPmux-1E. Figure 1-7. IPmux-1 3-D View Figure 1-8. IPmux-1E 3-D View 1-10 Physical Description Order from: Cutter Networks Ph:727-398-5252/F
Summary of the content on the page No. 19
IPmux-1/1E Installation and Operation Manual Chapter 1 Introduction Front Panel The control interface and indicator LEDs are located on the front panel of IPmux-1/1E. For further details see Chapter 2. Rear Panel User and network ports and power supply are located on the rear panel of IPmux-1/1E. For further details see Chapter 2. 1.3 Functional Description IPmux-1 supports a single E1 or T1 TDM interface; it provides TDM connectivity across the IP network. A single bundle (group of ti
Summary of the content on the page No. 20
Chapter 1 Introduction IPmux-1/1E Installation and Operation Manual Sub E1/T1 IPmux-1 Sub E1/T1 IPmux-1 E1/T1 Line 1 IP over E1/T1 Line 2 Ethernet E1/T1 Line 3 E1/T1 Line 4 IPmux-4/16 Sub E1/T1 IPmux-1 IPmux-1 Sub E1/T1 Figure 1-10. Grooming of Timeslots from Remote Sites into a Single E1/T1 Port at Central Site Other BRI/FXS applications are shown in Figure 1-3, Figure 1-4, and Figure 1-5. Operation Modes IPmux-1 E1/T1 IPmux-1 E1/T1 operation modes are: • Unframed • Fractional
