Summary of the content on the page No. 1
DL3800E
Inverse Multiplexer
User’s Guide
Part 098-30380-01 Rev F
July 9, 2001
Summary of the content on the page No. 2
COPYRIGHT AND TRADEMARKS Copyright © 2001, Quick Eagle Networks World copyright reserved. No part of this publication may be stored in a retrieval system, transmitted, or reproduced in any way, including but not limited to photocopy, photograph, magnetic, chemical, or other record, without the prior agreement and written permission of Quick Eagle Networks. PRODUCT LIMITED WARRANTY Quick Eagle Networks warrants to buyer that any unit shipped to buyer, under normal and proper use, will be fre
Summary of the content on the page No. 3
Buyer's exclusive remedy, and Quick Eagle Networks' total liability, for any and all losses and damages arising out of any cause whatsoever (whether such cause is based in contract, tort [including negligence], strict liability, or otherwise) shall in no event exceed the repair price of the unit from which such cause arises. In no event shall Quick Eagle Networks be liable for incidental, indirect, special or consequential damages resulting from any SUCH CAUSE EVENT WHETHER OR NOT QUICK EA
Summary of the content on the page No. 4
RIGHTS TO SOFTWARE Quick Eagle Network ("QEN") software products are proprietary to QEN and shall remain the property of QEN. Other than the limited, non- exclusive and non-transferable license granted to END USER to use the products internally, on a single CPU, for the purposes set forth herein, no rights in or to any QEN software products or documentation are granted to END USER. END USER is prohibited from duplicating, reproducing, displaying, printing, disassembling, decompiling, revers
Summary of the content on the page No. 5
Malfunction of the equipment: In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try using another FCC approved telephone in the same telephone jack. If the trouble does not persist and appears to be with this unit, disconnect the unit from the telephone line and discontinue use of the unit until it is repaired. Please note that the telephone company may ask that you disconnect this equipment from the telephone network until the proble
Summary of the content on the page No. 6
VCCI NOTE: As per the Voluntary Control Council for Interference by Information Technology Equipment (VCCI), the DL3800E Inverse Multiplexer complies with VCCI Class 1 ITE. This equipment is in the 1st Class category (information equipment to be used in commercial and/or industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference by Information Technology Equipment aimed at preventing radio interference in commercial and/or industrial areas. Conse
Summary of the content on the page No. 7
Table of Contents Preface xvii Audience xvii Organization xvii Conventions xviii Symbols xviii Typography xix Quick Eagle Networks Technical Support xx Returning a Unit xx Send Us Your Comments xxi Document Change Record xxi Chapter 1, Quick Install Guide 1-1 Purpose 1-1 Configuration 1-1 Equipment Needed 1-1 Setup 1-2 Terminal Log On 1-2 Terminal Configuration 1-2 Unit Configuration 1-2 DTE Configuration 1-2 Network Configuration 1-3 Save Configuration 1-3 Chapter 2, Introduction 2-1 System Ove
Summary of the content on the page No. 8
Application 2-3 Functional Description 2-4 Signal Flow 2-4 E1 Port Crossover Detection 2-5 Overhead Functions 2-6 Chapter 3, Installation 3-1 Installation 3-1 Mounting 3-2 Rack Mounting 3-2 Desk Operation And Stacking 3-2 Power Cables And Connections 3-3 AC Power Connection 3-3 DC Power Connection 3-3 E1 Network Connection 3-5 DTE Cable And Connection 3-5 ASCII Terminal and SNMP Connection 3-5 Direct Connection 3-6 Modem Connection 3-6 Telnet Connection 3-6 Daisy Chaining 3-7 Chapter 4, Terminal
Summary of the content on the page No. 9
Configuration 4-17 Unit Configuration 4-17 DTE Configuration 4-20 Network Configuration 4-25 Network Thresholds 4-28 Save Configuration 4-30 System Utilities 4-30 Software Download 4-31 Software Download Options 4-33 RAM Software Options 4-34 Delete Entire Unit Configuration (revert to factory config) 4-35 Login Configuration 4-37 SNMP Configuration 4-39 In-Band SNMP to Remote 4-42 Save Configuration 4-42 Tests 4-43 DTE/Network Loopback 4-44 Payload Loopback 4-44 Line Loopback 4-44 Local Loopbac
Summary of the content on the page No. 10
Front Panel LEDs 5-3 Access Levels And Protected Mode 5-4 Power Up And Reset 5-5 Top Menu 5-5 Select Remote/Select Local 5-7 Display Menu 5-7 Node (Common Equipment) Status 5-8 DTE Status 5-9 NET (1-8) Status 5-9 NET (1-8) Statistics 5-9 Test Menu 5-12 DTE Tests 5-14 DTE/NET Loopback 5-14 Network Tests (1-8) 5-15 Payload Loopback 5-15 Line Loopback 5-16 Local Loopback 5-16 Configuration Menu 5-17 Node Configuration 5-19 DTE Configuration Menu 5-24 Network Config 5-26 NET N Config 5-28 Network T
Summary of the content on the page No. 11
Appendix A, Specifications A-1 E1 Network Interface A-1 External Clock Interface A-1 DTE Interface A-2 COMM PORT A-2 NMS Port (SNMP) A-2 Front Panel A-3 Diagnostics A-3 Power A-3 Environmental A-3 Physical /Connectors A-4 External Alarm Contacts A-4 Appendix B, Pinouts B-1 Terminal Connection B-1 DCE Connectors B-1 Channel 1 Data Cable Pin Assignments B-2 DB-25 to DC-37 Data Port Cable Pin Assignments B-4 Communication Port Pin Assignments B-5 RS-449, DC-37 to DB-25 DCE Cable Pin Assignments B-5
Summary of the content on the page No. 12
Index I-1 xii DL3800E Inverse Multiplexer User’s Guide — July 9, 2001
Summary of the content on the page No. 13
List of Figures Figure 1-1 DL3800E Inverse Multiplexer (front panel) 1-1 Figure 2-1 DL3800E Inverse Multiplexer 2-1 Figure 2-2 Typical Application for DL3800E 2-3 Figure 2-3 DL3800E Functional Schematic 2-6 Figure 3-1 DL3800E Rear Panel 3-2 Figure 4-1 INVERSE MULTIPLEXER MAIN MENU 4-3 Figure 4-2 ALARMS AND STATUS MENU 4-5 Figure 4-3 STATISTICS MENU 4-11 Figure 4-4 NET STATISTICS MENU 4-12 Figure 4-5 Additional NET STATISTICS 4-13 Figure 4-6 EVENT HISTORY MENU 4-16 Figure 4-7 CONFIGURATION MENU 4
Summary of the content on the page No. 14
Figure 4-12 DTE CONFIGURATION MENU (HSSI) 4-22 Figure 4-13 Network Configuration Screen 4-26 Figure 4-14 Network Thresholds Configuration 4-29 Figure 4-15 SYSTEM UTILITIES MENU 4-30 Figure 4-16 SOFTWARE DOWNLOAD MENU 4-31 Figure 4-17 SOFTWARE UTILITIES MENU 4-36 Figure 4-18 LOGIN CONFIGURATION MENU 4-37 Figure 4-19 SNMP CONFIGURATION MENU 4-39 Figure 4-20 TESTS MENU 4-43 Figure 4-21 Loopbacks within the DL3800E unit 4-45 Figure 4-22 MANUAL NETWORK RESTORATION MENU 4-47 Figure 5-1 DL3800E Front P
Summary of the content on the page No. 15
List of Tables Table 4-1 Main Menu 4-4 Table 4-2 3800E Alarm Descriptions 4-5 Table 4-3 NET Statistics Items 4-13 Table 4-4 Alarm Level 4-16 Table 4-5 Node Configuration Options 4-18 Table 4-6 DTE Configuration Menu Options 4-23 Table 4-7 Network Configuration Menu Options 4-26 Table 4-8 Login Configuration Options 4-38 Table 4-9 SNMP Configuration Options 4-40 Table 5-1 Front Panel LEDs 5-3 Table 5-2 Net Statistics Menu Information Display 5-9 Table 5-3 Net Statistics Items 5-10 Table
Summary of the content on the page No. 16
Table B-1 COMM and NMS Port Pin Assignments B-1 Table B-2 HSSI DCE Connector Pin Assignments B-1 Table B-3 V.35, M-34 to DB-25 DTE Cable Pin Assignments B-2 Table B-4 EIA-530, DB-25 to DB-25 DCE Conn. Pin Assignmts B-3 Table B-5 DB-25 to DC-37 Data Port Cable Pin Assignments B-4 Table B-6 RS-449, DC-37 to DB-25 DCE Cable Pin Assignments B-5 Table B-7 Network Pin Assignments B-6 Table B-8 DB-25 to DE-9 Pinouts B-6 Table B-9 DB-25 to DB-15 Pinouts B-7 Table B-10 External Clock Pinouts B-7
Summary of the content on the page No. 17
Preface The DL3800E Inverse Multiplexer User’s Guide provides the information you need to install, test, operate, and manage the DL3800E Inverse Multiplexer. AUDIENCE This guide is prepared for network managers and technicians who are responsible for the installation of LAN-to-WAN equipment, and who are thoroughly familiar with the network topology in which the DL3800E Inverse Multiplexer is expected to operate. ORGANIZATION Chapter 1, “Quick Install Guide,” provides a concise installatio
Summary of the content on the page No. 18
CONVENTIONS This section describes the formats used to differentiate specific types of information throughout Quick Eagle Networks user guides. Symbols Symbols denote text that requires special attention. The information contained alongside a symbol corresponds to one of four levels of severity: NOTE: Follow guidelines in this, or the previous, paragraph to use the Quick Eagle Networks product more effectively. CAUTION: Follow guidelines in this, or the previous, paragraph to avoid equipmen
Summary of the content on the page No. 19
Typography Quick Eagle Networks manuals delineate the names of files, commands, and actions by using the fonts and typefaces described in the following table: Typeface or Symbol Purpose Example Courier The names of commands, files, and Edit your.login file. Font directories, as well as on-screen Use ls -a to list all files. AaBbCc123 computer output. machine_name% You have mail. Courier The input you provide, as contrasted machine_name% su Font, Bold with on-screen computer output. AaBbCc1
Summary of the content on the page No. 20
QUICK EAGLE NETWORKS TECHNICAL SUPPORT If you should experience difficulty with the setup and/or operation of your Quick Eagle Networks equipment, the Quick Eagle Networks Technical Support staff can assist you at any time. Telephone (408) 745-4200 FAX (408) 745-4240 E-mail support@quickeagle.com Internet www.quickeagle.com RETURNING A UNIT Use the following procedure if you need to return a unit for service or repair, 1. Contact the Quick Eagle Networks Customer Service Department at (408
