Primera Technology Business Card Adapter Kit user manual

Summary of the content on the page No. 1

SECTION II: RECORDING AND PRINTING
Operator Instructions
1. It is necessary to record and print the cards in two separate steps
when using Prassi™ PrimoCD Pro. To record, first load the input bin
with 50 blank CD-R Business Cards. Next, create your recording job
as described in the Duplicator User’s Manual. Make sure to disable
Business Card Adapter Kit
the Print option in Prassi’s Recording Job Window.
2. Once your Business Cards have finished recording, reload them in
For use with Composer™ O

Summary of the content on the page No. 2

3. Remove the original Input Bin and place the CD-R Business Card This sheet describes the installation and use of the CD-R Business Card Input Bin on the right side of the Duplicator. Adapter Kit for the Composer™ Optical Disc Duplicator and the Conductor™ Optical Disc Autoloader (referred to hereafter as the “Duplicator”). 4. Install the CD-R Business Card Clamp Assembly in the Printer Tray as shown below. The Front Template has molded pegs that mate NOTE: The Business Card Adapter Kit is desi