Patton electronic 2157 user manual

User manual for the device Patton electronic 2157

Device: Patton electronic 2157
Category: Network Card
Manufacturer: Patton electronic
Size: 1.1 MB
Added : 4/20/2013
Number of pages: 20
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Patton electronic 2157. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Patton electronic 2157.

For your convenience

If looking through the Patton electronic 2157 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Patton electronic 2157 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Patton electronic 2157 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Patton electronic 2157 User manual - Online PDF
Advertisement
« Page 1 of 20 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Patton electronic 2157 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Patton electronic 2157. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


USER
MANUAL
MODELS 2156 & 2157
CopperLink Ethernet
Extenders
Part# 07M2156_2157 SALES OFFICE
Doc# 032131U Rev. A
(301) 975-1000
Revised 2/4/03
TECHNICAL SUPPORT
(301) 975-1007
An ISO-9001Certified
Company

Summary of the content on the page No. 2

CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference............................................................ 3 1.2 CE Notice...................................................................................... 3 1.3 FCC Part 68.................................................................................. 4 1.4 Industry Canada Notice ............................................................

Summary of the content on the page No. 3

1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2156 or 2157 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not performs as warranted, your sole recourse shall be repair or replacement as

Summary of the content on the page No. 4

1.3 FCC PART 68 The Models 2156 and 2157 are not intended to be con- nected to the public telephone network. Caution 1. You are required to request service from the telephone company before you connect the Model 2156 or 2157 to a network. When you request service, you must provide the telephone company with the following data. — The required Universal Service Order code (USOC) jack: RJ-11C — The make, model number, Ringer Equivalence Number (REN), and FCC Registration number

Summary of the content on the page No. 5

1.4 INDUSTRY CANADA NOTICE NOTICE: This equipment meets the applicable Industry Canada Termi- nal Equipment Technical Specifications. This is confirmed by the registra- tion number. The abbreviation IC, before the registration number signifies that registration was performed based on a Declaration of conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment. 1.5 SERVICE All warranty and non

Summary of the content on the page No. 6

2.0 GENERAL INFORMATION Thank you purchasing this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for one year for parts and labor. If questions arise while installing or using this product, contact Technical Support at +1 (301) 975-1007. 2.1 FEATURES • Easy-to-install Ethernet Extenders—no configuration required • Auto-rate adaption ensures the highest rate possible for each exten- sion distance • Data rates to 2.3 Mbps (for M

Summary of the content on the page No. 7

Figure 1. Typical application The 2157/L and 2157/R work together to create a transparent extension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application. 7

Summary of the content on the page No. 8

3.0 INSTALLATION Because the CopperLink Ethernet Extenders require no configuration, they can be installed quickly. Installation consists of the following: • Connect the line interface between the units (refer to section 3.1, “Connecting the Twisted-Pair Line Interface” on page 8) Note See Figure 2 for the rear-panel connectors locations. • Connect the Ethernet interface (refer to section 3.2, “Line Interface— Connecting the 10/100Base-T Ethernet Interface” on page 9). • Connect t

Summary of the content on the page No. 9

Follow the steps below to connect the CopperLink interfaces. Note The Model 2156 or 2157 units work in pairs. One of the units must be a Model 2156/L (local) or 2157/L, and the other unit must be a Model 2156/R (remote) or 2157/R. 1. To function properly, the two Ethernet Extenders must be connected together using twisted-pair, unconditioned, dry, metal wire, between 19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through signal equalization equipment are not acceptab

Summary of the content on the page No. 10

Figure 4. CopperLink Ethernet Extender 10/100Base-T RJ-45 Connector Pinout. Connecting the 10/100Base-T Ethernet Port to a Hub or PC The Models 2156 and 2157 are equipped with an MDI-X switch that enables connections to a hub (DCE) or PC (DTE) interface, thereby elimininating confusion over whether a straight-through or crossover cable is needed. When using a straight-through cable for connecting to a hub, the MDI-X switch should be in its released (DCE mode) position (see Figur

Summary of the content on the page No. 11

2157 10/100Base-T Port 10/100Base-T DTE RJ-45 Pin No. RJ-45 Pin No. 1 (TX+) 1 (TX+) 2 (TX-) 2 (TX-) 3 (RX+) 3 (RX+) 6 (RX-) 6 (RX-) Figure 7. MDI-X switch pressed in performs 10/100Base-T crossover function 3.3 CONNECTING POWER An external AC or DC power supply is available separately. This connec- tion is made via the barrel jack on the rear panel of the Models 2156 and 2157. No configuration is necessary for the power supply (See Appendix B on page 18 for domestic and internati

Summary of the content on the page No. 12

An approved external power supply that incorporates a disconnect device must be used and positioned within easy reach of the operator’s position. Caution Connect the equipment to a 5 VDC source that is electri- cally isolated from the AC source. The 5 VDC source is to be reliably connected to earth. Caution External 48 VDC power supply • Input – Rated voltage: 36–60 VDC – Rated current: 0.25 A DC at nominal 48 VDC – 3-pin locking connector, 3.5 mm pitch – Reverse p

Summary of the content on the page No. 13

3.5 CONSOLE PORT The Console Port is only intended for use by Patton Electronics Technical Support technicians. 13

Summary of the content on the page No. 14

4.0 OPERATION Once the CopperLink Ethernet Extenders are properly installed, they should operate transparently. No user settings required. This section describes reading the LED status monitors. 4.1 FRONT PANEL LED STATUS MONITORS The Models 2156 and 2157 feature eight front-panel LEDs that monitor power, Ethernet signals, and the CopperLink connection. Figure 9 shows the front panel location of each LED. Table 1 describes the LED functions. Figure 9. CopperLink Ethernet Ex

Summary of the content on the page No. 15

APPENDIX A SPECIFICATIONS A.1 GENERAL CHARACTERISTICS • Compact low cost plug-and-play router • 10/100 Ethernet • Unlimited host support • Eight front panel LEDs indicate Power, WAN, Ethernet LAN speed and status • Convenient and standard RJ connectors for Ethernet and line • External UI or 48 VDC power supply options • Standard 1-year warranty A.2 WAN CHARACTERISTICS • 2.3 Mbps (Model 2156) or 4.6 Mbps speed (Model 2157) • RJ-11 connector • Uses two-wire unconditioned twisted-pai

Summary of the content on the page No. 16

A.4 EXTENSION DISTANCE AND RATE • 2.3 Mbps (Model 2156) or 4.6 Mbps speed (Model 2157) • Distances up to 30,000 ft (9,144 m) on 24 AWG (0.4 mm) wire • Auto-adjusting rate picks best rate for a given extension distance (see tables below) Table 2: Model 2156 Extension Distances No Noise DSL line rate 26g (0.4 mm) 24g (0.5 mm) 22g (0.6 mm) 20g (0.8 mm) 19g (0.9 mm) N kbps miles km miles km miles km miles km miles km 3 200 4.4 7.0 5.7 9.4 8.0 13.1 10.3 16.8 12.1 19.7 6 392 4.0 6.6 5.

Summary of the content on the page No. 17

A.5 LED INDICATORS • Eight LED indicators •Power • WAN Link, Transmit, and Receive • Ethernet Link, 100M, Transmit, and Receive A.6 POWER AND POWER SUPPLY SPECIFICATIONS • Either AC or DC options are available • Connection to the CopperLink Ethernet Extender requires +5VDC ±5% DC power (1.0A minimum). Center pin is +5V. The barrel type plug has a 2.5/5.5/10mm I.D./O.D./shaft length dimensions • CopperLink Ethernet Extender’s rated voltage: 5.0 VDC • CopperLink Ethernet Extender’s r

Summary of the content on the page No. 18

APPENDIX B MODELS 2156 AND 2157 SERIES FACTORY REPLACEMENT PARTS AND ACCESSORIES Patton Model # Description 2156 Base Models 2156/L CopperLink Ethernet Extender; Line: RJ-11 (Local) 2156/R CopperLink Ethernet Extender; Line: RJ-11 (Remote) 2156-2PK CopperLink Ethernet Extender Kit: includes one local (L) and one remote (R) Model 2156 2157 Base Models 2157/L CopperLink Ethernet Extender; Line: RJ-11 (Local) 2157/R CopperLink Ethernet Extender; Line: RJ-11 (Remote) 2157-2PK CopperLi

Summary of the content on the page No. 19

APPENDIX C MODELS 2156 AND 2157 SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 COPPERLINK INTERFACE RJ-11 • Pin 2: RING • Pin 3: TIP • Pins 1 & 4: no connection 19

Summary of the content on the page No. 20

Notes ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ______________________________________


Alternative user manuals
# User manual Category Download
1 Patton electronic 1004 User manual Network Card 4
2 Patton electronic 1004S User manual Network Card 0
3 Patton electronic 1004ABRC User manual Network Card 0
4 Patton electronic 1006 User manual Network Card 0
5 Patton electronic 1002 User manual Network Card 0
6 Patton electronic 1002S User manual Network Card 0
7 Patton electronic 1008 User manual Network Card 0
8 Patton electronic 1010A User manual Network Card 0
9 Patton electronic 1000S User manual Network Card 1
10 Patton electronic 1007S User manual Network Card 0
11 Patton electronic 1007 User manual Network Card 0
12 Patton electronic 1015 User manual Network Card 0
13 Patton electronic 1012ARC User manual Network Card 0
14 Patton electronic 1012B User manual Network Card 0
15 Patton electronic 1017 User manual Network Card 0
16 Sony BTA-NW1A User manual Network Card 2
17 Sony BKMW-E3000 User manual Network Card 2
18 Sony AC-SQ950D User manual Network Card 0
19 Sony BBV RX100 User manual Network Card 3
20 Sony CLIE A-AVZ-100-11 User manual Network Card 1