Summary of the content on the page No. 1
Nokia Bluetooth Headset BH-118 User Guide
Issue 1.0
Summary of the content on the page No. 2
2 Contents Introduction 3 About your headset 3 About Bluetooth connectivity 3 Get started 4 Keys and parts 4 Charge the battery 4 Switch the headset on or off 5 Pair and connect the headset to your phone 5 Switch the voice guidance off 6 Wear the headset 6 Make calls 7 Make and receive calls 7 Change the volume 8 Pair and connect the headset to two phones 8 Handle calls from two phones 8 Settings 9 Clear device pairings 9 Product and safety information 9
Summary of the content on the page No. 3
3 Introduction About your headset With the Nokia Bluetooth Headset BH-118, you can make and receive calls while on the move. Read this user guide carefully before using the product. Also, read the user guide for the device that you connect to the product. Warning: This product may contain small parts. Keep them out of the reach of small children. The surface of this product is nickel-free. About Bluetooth connectivity You can use Bluetooth to make a wireless connection to other compatible device
Summary of the content on the page No. 4
4 Get started Keys and parts 1 Earpiece 2 Microphone 3 Earpiece holder 4 Multifunction key 5 Clip 6 Charger connector 7 Indicator light Parts of the product are magnetic. Metallic materials may be attracted to the product. Do not place credit cards or other magnetic storage media near the product, because info stored on them may be erased. Charge the battery Before using the headset, you must charge the battery. Warning: Use only chargers approved by Nokia for use with this particular model. The
Summary of the content on the page No. 5
5 2 Connect the charger cable to the charger connector on the headset. The red indicator light turns green when the battery is fully charged. Charging the battery fully may take up to 2 hours. 3 Disconnect the charger from the headset, then unplug from the wall outlet. The fully charged battery has power for up to 6 hours of talk time or up to 120 hours of standby time. When the battery charge is low, you hear a voice prompt, the headset beeps every 5 minutes, and the red indicator light flashes
Summary of the content on the page No. 6
6 The headset switches to pairing mode, and a green indicator light starts to flash quickly. 4 Within 3 minutes, switch Bluetooth on in your phone, then set it to search for Bluetooth devices. For details, see the user guide of your phone. 5 Select the headset from the list of found devices. 6 If needed, type in the passcode 0000. You can pair your headset with 8 compatible phones, but you can only connect it to a maximum of 2 phones at the same time. With some devices, you may need to make the
Summary of the content on the page No. 7
7 To have the earpiece within easy reach when not using the headset, keep the earpiece in the holder. Make calls Make and receive calls To make and receive calls using your headset, you need to connect it to your phone. Make a call Make a call in the normal way. Answer or end a call Press . Reject a call Press twice. Switch a call from your headset to a compatible phone Press and hold for 2 seconds, or switch the headset off. Switch a call from a compatible phone to your headset Press and hold
Summary of the content on the page No. 8
8 Redial the last called number Press twice. Use voice dialling Press and hold for 2 seconds, then follow the instructions in the user guide of your phone. Change the volume Set the desired volume level on your connected phone. The selected volume level is saved as the minimum volume level for the phone that is currently connected to the headset. Pair and connect the headset to two phones When you use the headset for the first time, it automatically connects to your phone. You can also connect
Summary of the content on the page No. 9
9 Settings Clear device pairings 1 To switch the headset off, press and hold for 5 seconds. 2Press and hold for 9 seconds. The headset beeps twice, and the red and green indicator lights alternate. After the pairings are cleared, the headset enters pairing mode. Product and safety information Battery and charger information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. This device is intended f
Summary of the content on the page No. 10
10 • Do not attempt to open the device. • Unauthorised modifications may damage the device and violate regulations governing radio devices. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and mechanics. • Only use a soft, clean, dry cloth to clean the surface of the device. Recycle Always return your used electronic products, batteries, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and pro
Summary of the content on the page No. 11
11 /Issue 1.0 EN
