Summary of the content on the page No. 1
DIN CONNECTORS (AXD)
DIN CONNECTORS
CONNECTORS FOR PC
BOARD TO PC BOARD
(AXD)
UL
DIN Connector conforming to DIN/IEC standards
(for B and C type)
FEATURES
1. 2 pieces connectors conforming to 4. Plenty of products with improved
DIN 41612 and IEC 603-2. functions
2. Clip contact with reliable The following types are available in
construction on both sides for highly addition to ones with the time difference
reliable contact. contact function.
1) Withstands vibration and shock. -Flux-tight ty
Summary of the content on the page No. 2
DIN CONNECTORS (AXD) ORDERING INFORMATION AXD 1 DIN connectors 1: Socket 2: Header 20: 20 contacts 32: 32 contacts 44: 44 contacts 50: 50 contacts 64: 64 contacts 90: 90 contacts 96: 96 contacts 00: 100 contacts 2: B type (2 rows terminal pitch: 2.54 mm) 3: C type (The middle row is removed terminal pitch: 5.08 mm) 4: C type (3 rows terminal pitch: 2.54 mm) 6: R type (The middle row is removed terminal pitch: 5.08 mm) 7:
Summary of the content on the page No. 3
DIN CONNECTORS (AXD) INTRODUCTION OF OTHER TYPES 1. FEATURES OF REVERSE TYPE DIN Standard type and reverse type CONNECTOR Header/ Terminal Types Form socket shape New series of reverse types popular in the U.S.A. Header Angle 1) Shock resistant socket construction The contacts of the socket mounted on the Integrated construction of the flange and Srandard Standard mother board (power supply side) are covered header housing prevent damage to the terminals type to prevent electrical shock and
Summary of the content on the page No. 4
DIN CONNECTORS (AXD) PRODUCT TABLE Socket Header Standard types Reverse types Standard types Reverse types Type B type C type Q type R type B type C type Q type R type 2 rows 3 rows 2 rows 3 rows 2 rows 3 rows 2 rows 3 rows 100 100 100 100 96 96 96 96 90 90 64 64 64 64 64 (The middle row 64 (The middle row 64 (The middle row 64 (The middle row No. of contacts is removed) is removed) is removed) is removed) 50 50 50 50 44 44 32 32 32 32 20 20 Terminal shape PC board top mounting —— Available Av
Summary of the content on the page No. 5
DIN CONNECTORS (AXD) PRODUCT TYPE (HIGHER FUNCTIONAL products) 1. Top mounting types 1) B type (standard 2 rows) 2) C type (standard 3 rows) Shape Shape Header Header Solder-dip angle terminals Solder-dip angle terminals No. of contacts No. of contacts Part No. Part No. 20 AXD220201 64 (The middle row is AXD264301 32 AXD232201 removed) 44 AXD244201 96 AXD296401 50 AXD250201 64 AXD264201 90 AXD290201 100 AXD200201 3) Q type (reverse 2 rows) 4) R type (reverse 3 rows) Shape Shape Socket Socket So
Summary of the content on the page No. 6
DIN CONNECTORS (AXD) 3. Flux resistance types 1) B type (standard 2 rows) 2) C type (standard 3 rows) Shape Shape Socket Socket Solder-dip straight terminals Solder-dip straight terminals Without self-clinching With self-clinching Without self-clinching With self-clinching bracket bracket bracket bracket No. of contacts No. of contacts Part No. Part No. Part No. Part No. 20 AXD120221 AXD120271 64 (The middle row is AXD164321 AXD164371 32 AXD132221 AXD132271 removed) 44 AXD144221 AXD144271 96 A
Summary of the content on the page No. 7
DIN CONNECTORS (AXD) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac DIMENSIONS of 2 Rows type (Unit: mm) • B type socket (20, 32, 44, 50, 64, 90 and 100 contacts) Solder-dip straight terminals A B±0.2 CAD Data 0.3 C 2-2.8 dia. 8.0 11.4 2.7 4.9 4.0 0.35 2.54±0.15 2.54±0.15 0.6 D±0.2 General tolerance: ±0.3 Dimension table (mm) Recommended PC board pattern (Bottom view) No. of A B C D +0.1 0.8 dia. contacts 0 2-2.8±0.05 dia.
Summary of the content on the page No. 8
DIN CONNECTORS (AXD) • Q type socket (32, 50, 64 and 100 contacts) Solder-dip angle terminals CAD Data 8.0 PC board PC board edge mounting top mounting type type C 6.0 6.0 +0.1 6.5 3.0 0 11.32 2.54±0.2 2.54±0.2 15.2 64 contacts 2.54±0.15 2.5 11.32 2.54±0.15 2.7 2.7 15.2 2.5 3.2 2.9 2.54±0.15 0.38t×0.6W D±0.2 (50, 64 contacts), D±0.3 (100 contacts) B±0.2 A General tolerance: ±0.3 Recommended PC board pattern (Bottom view) +0.1 0.8 dia. 0 2.54±0.05 2-2.8±0.05 dia. 2.54±0.1 5.3 Dimension table (mm)
Summary of the content on the page No. 9
DIN CONNECTORS (AXD) DIMENSIONS of 3 Rows type (Unit: mm) • C type socket (64 and 96 contacts) Solder-dip straight terminals 94.6 90.0±0.2 CAD Data 85.0 2.-2.8 dia. 0.3 10.5 11.4 4.9 4.0 0.35 2.54±0.15 0.6 2.54±0.15 2.54±0.15 78.74±0.2 General tolerance: ±0.3 Recommended PC board pattern (Bottom view) +0.1 0.8 dia. 0 2-2.8±0.05 dia. (10.5) 0.3 2.54±0.05 2.54±0.05 2.54±0.05 78.74±0.1 Note: For 64 contacts type, 90.0±0.1 the middle row is removed. • C type header (64 and 96 contacts) Solder-dip a
Summary of the content on the page No. 10
DIN CONNECTORS (AXD) • R type socket (64 and 96 contacts) Solder-dip angle terminals CAD Data 78.74±0.2 0.38t×0.6W 2.54±0.15 10.5 8.5 PC board PC board edge mounting top mounting type type 8.5 8.5 85.0 3.05 6.5 10.1 2.54±0.2 2.54±0.2 12.5 2.54±0.15 2.54±0.15 2.54±0.15 2-2.5 dia. 2.54±0.15 3.0 3.2 88.9±0.2 93.6 General tolerance: ±0.3 Recommended PC board pattern (Bottom view) +0.1 0.8 dia. 0 2.54±0.05 2.54±0.05 2.54±0.1 2-2.8±0.05 dia. 5.30±0.1 (Standard type only) 2.54±0.05 78.74±0.1 Note: For
Summary of the content on the page No. 11
DIN CONNECTORS (AXD) COMBINATION FORM (mm) Vertical fixing Types Header Stacking fixing Horizontal fixing Standard Reverse 6.72 6.91 3.65 1.45 Q type socket Q type socket B type header 2.54 B type 2.54 PC board edge header mounting type Q type 2.72 2.68 header (DIN standards) 16.57 15.15 B type 2.54 2.54 socket 15.07 2.54 0.3 0.3 2.54 2.54 B type socket 2 rows type 16.65 Q type header 8.0 8.46 2.73 5.2 2.54 Q type socket Q type socket B type header top mounting top mounting type top mounting type
Summary of the content on the page No. 12
DIN CONNECTORS (AXD) NOTES 1. Regarding printed circuit board b) Removal 8. Method for preventing incorrect design • Apply uniform force with the lever and insertion As the terminal numbers are marked on carry out the separation. 1) After the incorrect insertion prevention the connector, the printed circuit board key is inserted in the designated groove design can be carried out based on the position, the handle portion should be terminal numbers. Lever broken away. 2. Regarding soldering fo
