Summary of the content on the page No. 1
Semiconductor
VoiceKit2000
Hardware and Software Instruction Manual
Web Link to this product: Version number: 1.10
http://www.oki.co.jp/semi/english/vk2000.htm Issue: October, 1999
Replaces version: n/a
Author Code: J595RB
1. PRODUCT DESCRIPTION
VoiceKit2000, hereafter referred to as VK2000, is a printed circuit board designed for the purpose of
demonstrating a selection of OKI Electric’s speech LSIs in conjunction with an IBM PC/AT compatible
®
personal computer running Windows 95/98 . The
Summary of the content on the page No. 2
VK2000 Semiconductor 3. SYSTEM REQUIREMENT • IBM PC/AT or 100% compatible ® • Windows 95/98 operating system ® • Pentium CPU 133MHz min. (166MHz or above recommended) • 16 MB working memory (32MB or more recommended) • 10MB free hard disk space • VGA monitor 640 x 480 pixels, 256 colours min. • Mouse 4. HARDWARE CONFIGURATION Volume L (VR1) Power Switch Volume R (VR2) Reset Switch RS232C Speaker L (3.5mmØ) Control Speaker R (3.5mmØ) Software Line-in (for future use)
Summary of the content on the page No. 3
VK2000 Semiconductor 6. GETTING STARTED Connect VK2000 firmly to a free serial port of the PC. Double-click on the program icon to start the control software which will come up with the screen pictured below for the selection of the serial port. By default, COM1 is selected. Any valid selection you make will be stored in an initialisation file and be available at next start up. Before going further, please make sure that the serial cable is properly connected to both VK2000 and the host.
Summary of the content on the page No. 4
VK2000 Semiconductor 7.1. L2500 (Full part number ML2500) Analog storage recorder LSI with internal 1 megacell flash memory. The voice quality of ML2500 is representative for all Oki analog storage recording LSIs. Recording 1. Select the number of phrases (recording channels from 1 to 16) into which you would like to split the recording memory. All phrases will have the same length. They are symbolised in the Start Switches frame. 2. Select the desired sampling frequency and click on t
Summary of the content on the page No. 5
VK2000 Semiconductor 7.2. M9888L (Full part number MSM9888L) ADPCM recorder LSI with external 4 megabit Oki Serial Voice Flash. Playback from LSI-internal Mask ROM MSM9888L contains a 512KBit ROM which is programmed with sample sounds. Select a sample from the combo box in the Phrase Address Table frame and click on PLAY. Or click on one of the SAMPLE buttons to listen. Recording If the device is still unrecorded, the combo box labelled “Recording No” shows 01. It will automati- cally incre
Summary of the content on the page No. 6
VK2000 Semiconductor 7.3. M9841 (Full part number MSM9841) ADPCM recorder LSI with FIFO buffer and DMA interface. Recording If the device is still unrecorded, the combo box labelled “Phrase No” shows 01. It will automatically increment as the RECORD button is clicked. 1. Select a recording number, select the desired sampling frequency, select the desired algorithm 2. Click on RECORD. 3. Click on STOP when finished. 4. The recorded phrase and algorithm appears in the combo boxes in the PLAY
Summary of the content on the page No. 7
VK2000 Semiconductor 7.4. M66P56 (Full part number MSM66P56) ADPCM/PCM speech synthesis LSI with internal 2 megabit OTPROM. Playback 1. Select a Phrase Table 2. Select the desired phrase from the associated combo box. 3. Click on PLAY 4. Click on STOP, if you wish to terminate before playback end automatically. Page 7/11
Summary of the content on the page No. 8
VK2000 Semiconductor 7.5. M9831 (Full part number MSM9831) PCM speech synthesis LSI with internal 384 kilobit ROM. Playback of pre-recorded samples 1. Select the Phrase Table frame 2. Select the desired phrase from the associated combo box. 3. Click on PLAY 4. Click on STOP, if you wish to terminate before playback ends automatically. Blinker sounds 1. Click on TYPE A and TYPE B buttons to playback. 2. Click on STOP, if you wish to terminate before playback ends automatically. DTMF 1. Click
Summary of the content on the page No. 9
VK2000 Semiconductor 7.6. M6722 (Full part number MSM6722) Voice Pitch Controller LSI within ± one octave control range. The MSM6722 has no recording and playback function. It shifts your voice coming from the micro- phone in real-time within an octave up or down. Speech Pitch 1. Set the speech pitch as desired and speak into the microphone. 2. You can alter the pitch setting whilst talking in the microphone. M9841 Sound Usage of this requires that speech was previously recorded with th
Summary of the content on the page No. 10
VK2000 Semiconductor NOTICE The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up- to-date. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the a
Summary of the content on the page No. 11
ADDRESSES & SEMICONDUCTOR WEB SITES OKI Electric Industry Co., Ltd., Device Business Group, 10-3, Shibaura, 4-chome, Minato-ku, Tokyo 108, Japan, Tel.: +81-(0)3-5445-6327, Fax.: +81-(0)3-5445-6328, http://www.oki.co.jp/semi/ OKI Semiconductor Company, 785 North Mary Avenue, Sunnyvale, CA 94086, U.S.A., Tel.: +1-408-720-1900, Fax.: +1-408-720-1918, http://www.okisemi.com/ OKI Electric Europe GmbH, Head Office Europe, Hellersbergstrasse 2, D-41460 Neuss, Germany, Tel: +49-2131-15960, Fax: +49-2131
