Summary of the content on the page No. 1
NDA-24230
DOI-E10504
ISSUE 2
STOCK # 0293884
VisuaLink 128/384
User Guide
DECEMBER, 1998
NEC America, Inc.
Summary of the content on the page No. 2
LIABILITY DISCLAIMER NEC America, Inc. reserves the right to change the specifications, functions, or features, at any time, without notice. NEC America, Inc. has prepared this document for use by its em- ployees and customers. The information contained herein is the property of NEC America, Inc. and shall not be reproduced without prior written approval from NEC America, Inc. Copyright 1998 NEC America, Inc. Printed in USA
Summary of the content on the page No. 3
EXHIBIT J1 FCC REQUIREMENTS NEC America, Inc. VisuaLink 128/VisuaLink 384 TYPE OF SERVICE The VisuaLink 128 and the VisuaLink 384 are stand-alone devices that allow multimedia conferencing by transmitting video, audio and data to remote locations over the ISDN Basic Rate interface. The VisuaLink 128 and VisuaLink 384 connect to the ISDN digital network through separately-registered NTI equipment. They provide POTS ports which allow a customer-provided 2500-type telephone access to the digital
Summary of the content on the page No. 4
IF PROBLEMS ARISE If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone lines, as it may cause harm to the telephone network. If the telephone company notes a problem, they may temporarily discontinue service. When practical, they will notify you in advance of this disconnection. If advance notice is not feasible, you will be notified as soon as possible. When you are notified, you will be given the opportunity to correct the probl
Summary of the content on the page No. 5
CSA Requirement To ensure that certified equipment is attached correctly, and only to the networks of participating carriers, the following statement shall accompany each unit of certified equipment offered for sale. This statement must be included conspicuously in written or electronic format, at or near the front of each copy of the operating manual, or accompany other technical information, or be included as a separate sheet. The required statement is: CP-01, Issue 8, Part I Section 14.1
Summary of the content on the page No. 6
Summary of the content on the page No. 7
VisuaLink 128/384 User Guide Table of Contents Table of Contents Chapter 1 Introducing Your VisuaLink ................................................................ 1-1 Applying for ISDN BRI ........................................................................................................ 1-1 Unpacking ........................................................................................................................... 1-2 Chapter 2 Introduction of VisuaLink.........................
Summary of the content on the page No. 8
Table of Contents VisuaLink 128/384 User Guide Chapter 8 Operation Method................................................................................. 8-1 System Status..................................................................................................................... 8-1 Volume Control ................................................................................................................... 8-3 Muting Your Microphone.................................................
Summary of the content on the page No. 9
List of Figures VisuaLink 128/384 User Guide List of Figures Figure 4-1: Connection Diagram for VisuaLink 128............................................... 4-2 Figure 4-2: Connection Diagram for VisuaLink 384............................................... 4-3 Figure 4-3: Connection Diagram for VisuaLink 128............................................... 4-5 Figure 4-4: Connection Diagram for VisuaLink 384............................................... 4-6 Figure 4-5: Connection Diagram for
Summary of the content on the page No. 10
List of Tables VisuaLink 128/384 User Guide List of Tables Table 1-1: Parts List for the VL128 and VL384..................................................... 1-2 Table 1-2: Optional parts to be provided.............................................................. 1-3 Table 2-1: VisuaLink 128 and VisuaLink 384 General Parameters .................... 2-5 Table 2-2: VisuaLink 128 and VisuaLink 384 External Interface Parameters.... 2-7 Table 9-1: Troubleshooting Guide ..............................
Summary of the content on the page No. 11
VisuaLink 128/384 User Guide Chapter 1 Chapter 1 Introducing Your VisuaLink 1.1 Applying for ISDN This device cannot be used unless a connection to ISDN BRI Communication BRI Line is provided. Verify that a ISDN line exists before the CODEC is installed. What to watch out for when filling out an ISDN BRI application: As defined by Bellcore; the ISDN BRI simplified ordering code is EZ-ISDN1. • The ISDN BRI protocol national ISDN-1. • The ISDN BRI service must be tariffed and available from th
Summary of the content on the page No. 12
Chapter 1 VisuaLink 128/384 User Guide 1.2 Unpacking • Opening the Box Please take out the device without giving any impact on it when opening the box. Please keep the box after opening it, since you may use it when you send the device for repair, maintenance and/or travel. • The Contents of the Package The VisuaLink 128 and VisuaLink 384 package contains the following items. Please verify these items are contained the box. Table 1-1: Parts List for the VL128 and VL384 Item Description (A)
Summary of the content on the page No. 13
VisuaLink 128/384 User Guide Chapter 1 Table 1-1: Parts List for the VL128 and VL384 (continued) (E) Audio Video Cable This cable is used to connect peripheral devices such as camera and TV to the VisuaLink 128 or VisuaLink 384. Table 1-2: Optional parts to be provided (A) BRI Network Cable This cable is used to connect the VisuaLink 128 or VisuaLink 384 to an ISDN BRI network. Note: Three (3) cables are required for a VisuaLink 384. (B) Microphone The microphone connects to the rear of
Summary of the content on the page No. 14
Chapter 1 VisuaLink 128/384 User Guide Table 1-2: Optional parts to be provided (continued) (D) Camera A pan/tilt zoom focus camera that provides a video image shot to the far-site. Note: Used in the turnkey rollabout configurations. (E) PC Camera A fixed camera used to provide a one or two person shot to the far site. Note: Used in the desktop application. (F) Monitor A TV monitor to provide for viewing of the far-site. Note: Provided with the turnkey rollabout configuration. (G) Cabi
Summary of the content on the page No. 15
VisuaLink 128/384 User Guide Chapter 2 Chapter 2 Introduction of VisuaLink 2.1 About your The VisuaLink 128 and the VisuaLink 384 are devices that easily realize a VisuaLink multimedia conference by transmitting video, audio, and data to a remote location with the use of BRI service. The VisuaLink 128 and VisuaLink 384 provide a low-end TV conference for a small group of people when connected to a hands- free telephone. In addition, with a connection with a PC, a TV conference using data
Summary of the content on the page No. 16
Chapter 2 VisuaLink 128/384 User Guide 2.2 Front Panel This section briefly describes names and features of the VisuaLink 128 and Description VisuaLink 384. POWER HEADSET LINE POWER B1 B2-B6 ➂ ➃ ➁ ① ① POWER Switch The push-button switch is used to turn on and off the main power. When the power is on, the power lamp will be lit. ➁ Remote controller optical receiver This is a optical receiver, which receives signal from remote controller. ➂ LED Display Power Lamp (power) : a green light will
Summary of the content on the page No. 17
VisuaLink 128/384 User Guide Chapter 2 2.3 VisuaLink 128 Rear Panel Description 10 11 ➂➃ ➅ ➆ + + + O 13 U T MIC1 MIC2 MIC3 TEL S/T LINE + + I N + VIDEO2 VIDEO1 AUDIO Serial1 Serial2/RMT DC IN 5V + - + ① 12 ➄ ➇ ➈ ➁ ① VIDEO 2 IN (S-Video input): Provides an S-Video input connection for a camera or other video source. ➁ VIDEO 1 IN (NTSC input): Provides a composite
Summary of the content on the page No. 18
Chapter 2 VisuaLink 128/384 User Guide 2.4 VisuaLink 384 Rear Panel Description 11 10 ➃ ➅ ➆ ➂ + + + 13 O U T TEL LINE 1 LINE 2 LINE 3 MIC1 MIC2 MIC3 + + I N + VIDEO2 VIDEO1 AUDIO Serial1 Serial2/RMT DC IN 5V + - + ① 12 ➄ ➇ ➁ ➈ ① VIDEO 2 IN (S-Video input): Provides an S-Video input connection for a camera or other video source. ➁ VIDEO 1 IN (NTSC inpu
Summary of the content on the page No. 19
VisuaLink 128/384 User Guide Chapter 2 Table 2-1: VisuaLink 128 and VisuaLink 384 General Parameters Parameter VisuaLink 128 VisuaLink 384 Connection Basic Rate Interface (BRI) Basic Rate Interface (BRI) Line Type National ISDN-1 National ISDN-1 •TEL •TEL • 64 Kbps (B) • 64 Kbps (B), 2 x 64kbps (2B) • 2x64 Kbps (2B) • 128, 192, 256, 320, 384 Kbps Line Transmission Speed • Upgradeable to 384 Kbps • 56, 112, 168, 224, 280, 336kbps Note: Px56 Kbps mode complies with Note: P x 56kbps mode complies
Summary of the content on the page No. 20
Chapter 2 VisuaLink 128/384 User Guide Table 2-1: VisuaLink 128 and VisuaLink 384 General Parameters (continued) Parameter VisuaLink 128 VisuaLink 384 • Wireless remote control • Wireless remote control (built-in IR receiver) (built-in IR receiver) • PC connected (with serial port) • PC connected (with serial port) User Interface PC software sold separately is required PC software sold separately is required • Telephone (for analog line, 2-line cable, • Telephone (for analog line, 2-line cable,
