Summary of the content on the page No. 1
Bluetooth Headset User Guide
HCB32
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Index . Notice beforeusing 2. Package List 3. Product Introduction 4. Charging the Headset 5.Power On/ Off 6. Pairing the Headset (orany Bluetooth Device) 7. Wearing the Headset 8. Answering calls 9. Refusingcalls 0. Ending calls . Voice Dialing 2. Redialing 3.Mute 4. Transferring calls 5. Maintaining calls 6. Ending Call and answering Call 2 7. Triple Phone Conversation 8. Adjusting the Volume 9. Safety I
Summary of the content on the page No. 4
1. Notice before using Thank you for purchasing our Bluetooth Headset HCB32. First of all, please check to find everything in your package and care- fully study the user guide to know the function details. HCB32 is developed by the innovative Bluetooth wireless technology, enabled to connect the Bluetooth mobile phone designed with Audio Gateway (HCB8/ HCB2), PDA, desktop and notebook with the USB Bluetooth Dongle plugged-in,
Summary of the content on the page No. 5
3. Product Introduction Function (Answering/ Ending/On/ Of f) Button 3 LED(Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) EarHook Decrease Volume key(-) Increase Volume key (+) 2 Note: ● For first time use, make sure to fully rechar ge the Headset bat- tery. 4. Charging the Headset HCB32 comes with a LithiumPolymer battery built-in. 3
Summary of the content on the page No. 6
. Plug thetravel charger into the powersocket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is completed, the red indicator will shut of f or flashes red. Note: Charging time is around 90~20 minutes. ● For first time use, make sure to fully rechar ge the Headset up to 4 hours. After a long time of not using it (around one month), wh
Summary of the content on the page No. 7
will turn on after the indicator flashes the blue light 3 times. 2. To turn the power off, press and hold the function button for 2~3 seconds until you see the red indicator flash 3 times. Note: ● While turning the Headset on, you will hear the “Du Du” sound from the receiver . The blue indicator light will flash 5 times, then 2 times, and after repeating this for 5 times, the indicator will flash the blue light every 3 seconds to
Summary of the content on the page No. 8
start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4. When your mobile phone is in the stage of searching a new Bluetooth device, it will find HCB32. 5. Please choose and confirm HCB32. 6. Key in the Headset Password “0000” and press YES. If the pairing is successful, the indicator turns to flash the blue light only. For some mobile phones, after pairing
Summary of the content on the page No. 9
● Even though the following situations happen, the paired devices remain pairing. - Thepower for one of the devicesis off. - The service for one of the devices is off. - One of the devices is re-switched on. 7. Wearing the Headset According to your preference, adjust the headset on your left or right ear. 8. Answering the calls . While there is a call coming, wait until you hear the ringing from your Headset receiver to press the fu
Summary of the content on the page No. 10
2. If the mobile phone is ringing first, wait until the Headset is ringing, then press the functionbutton. 3. While answering the calls, the blue indicator light flashes 4 timeseach second. 4. If the mobile phone is ringing and your Headset is off, turn on your Headset first, then press the function button to answer thecall. 5. If your mobile phone has the function of automatically re- ceiving calls and you already set it
Summary of the content on the page No. 11
. When the conversation is over, press the function button to end calls. 2. Wait until the other endhangs up the phoneto end calls. 11. Voice dialing . If your mobile phone supports the voice dialing function, you canuse this function withyour Headset too. 2. Under the standby or connecting mode, press the function button of the Headset and follow the mobile phone instruc- tions to proceed with the voice dialing. Note: ● The activatio
Summary of the content on the page No. 12
crease (+) volume key at the same time until you hear the “Du” sound, then the other end will not hear you. 2. Under the mute mode, you will hear the intermittent “Du” sound. 3. Press either the increase (+) or decrease (-) volume button to end the mute function. 14. Transferring calls . When you are answering the call with the Headset, press the increase (+) volume key for 2~3 seconds until you hear one “Du” sound, then the cal
Summary of the content on the page No. 13
interrupting call coming, the Headset will answer it automati- cally. 2. Press the decrease (-) volume key for 2~3 seconds until you hear one “Du” sound to end the maintaining call function. Also do this to renewthe call. Note: ● T o activate this function, please make sure the assigned tele- communications agent providesthis service. ● T o activate this function, please refer to the instructions of your mobile phones manual to mak
Summary of the content on the page No. 14
17. Triple phone conversation . While you are answering Call from your Headset and hav- ing the interrupting call, you will hear the notifying “Du Du” sound. Press the decrease (-) volume key for 2~3 seconds until you hear the “Du” sound, Call 1 will be maintained and theinterrupting call(Call 2) will beanswered automatically. 2. To proceed the triple phone conversation while you are an- swering the interrupting call (Call
Summary of the content on the page No. 15
● If Call 1 is maintained and Call 2 is on line, quickly press the functionbutton to end Call 2 and renew Call. 18. Adjusting the Volume During a call, you may adjustthe Headset’ s volume. . To increase the volume, pressthe increase (+) volume key. 2. To decreasethe volume, press the decrease (-) volume key. Note: ● Y ou will hear the “Du Du” sound while adjusting the volume up tothe loudest or lowest. 19. Safety instruction . Read the
Summary of the content on the page No. 16
-If you enconter a problem, turn the Headset of f first. -If the inside components breakdown, please contact the repairing center to askfor immediate supportand service. 20. Specification Product Model No. HCB32 StandardConvention/ Signal Output Bluetooth V.2, Class II Frequency Band 2.4GHz ~ 2.4835GHz, ISM Band Talk/ Standby Time Up to 9 hours/ Up to 300 hours Supporting Profile Headset & Handsfree Connection Peer toPeer DataEncryption 28bits encrypt
Summary of the content on the page No. 17
21. Excluding Problems 1. The Headset flashes the red indicator light: The battery is low , pleaserechar geyour Headset. 2. If after recharging for 20 minutes, the Headset does not turn on: For initial use, the power will be on after charging the Headset at least for 40 minutes. It is suggested to fully re- char ge the Headset if you use it for the first time. 3. Does not show the recharging sign: When the battery is com- pletely
Summary of the content on the page No. 18
termination of thewarranty . - Do not disassemble the Headset, it may damage the Headset accidentallyor cause the warrantyinvalidation. - Put the Headset away from placesfull of dust. - Use clean and softfabric to clean the Headset’ssurface. - Put the Headsetinto your pocket while not using it. - Be aware not to let Children play with the Headset, avoiding accidents from happeningor damaging the product. - Avoid storing the Headset in hig
Summary of the content on the page No. 19
- Under a chilly environment, it may cause the battery’s capac- ity to decrease. - Recharge the Headset at least once every two months, either you use itor not. 23. Q & A Q : Why does the fully-char ged Headset under the “On” mode not work with theBluetooth mobile phone? A : You must activate the Bluetooth function of your mobile phone and finish the pairing between your mobile phone and Head- set. Q: Can HCB32 workwith any o
Summary of the content on the page No. 20
one Bluetooth device within the working range. When the searching is finished, your mobile phone’ s LCD will show HCB32 or some Unknown Devices. Please select and con- firm HCB32. Q : Why my mobile phone could not find the Headset? A : Only while your Headset is under the pairing mode, your mo- bile phone can find the Headset. Please follow the instruc- tions of yourHeadset manual to proceed the pairingprocess. Q : Shallwe pairthe
