Summary of the content on the page No. 1
IBM ARTIC X.25 Interface Co-Processor
PCI Adapter
Guide to Operations
IBM
Summary of the content on the page No. 2
Summary of the content on the page No. 3
IBM ARTIC X.25 Interface Co-Processor PCI Adapter Guide to Operations IBM
Summary of the content on the page No. 4
Important Before using this information and the product it supports, be sure to read all the information in Appendix B, “Notices.” Before installing or removing an adapter, be sure to study the Connect/Disconnect sequence diagram for cables in “Safety Information” on page B-2. First Edition (August 1996) This publication could include technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be incorporated in new editions
Summary of the content on the page No. 5
International Business Machines Corporation Armonk, New York, 10504 Statement of Limited Warranty The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase for your use, and not for resale, from IBM or your reseller. The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. Unless IBM specifies otherwise, the following warranties apply only in the country where
Summary of the content on the page No. 6
If you transfer a Machine to another user, warranty service is available to that user for the remainder of the warranty period. You should give your proof of purchase and this Statement to that user. However, for Machines that have a life-time warranty, this warranty is not transferable. Warranty Service To obtain warranty service for the Machine, you should contact your reseller or call IBM. In the United States, call IBM at 1-800-IBM-SERV (426-7378). In Canada, call IBM at 1-800-465-6666.
Summary of the content on the page No. 7
THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. Limitation of Liability Circumstances may arise where, because of a default on IBM’s part or oth
Summary of the content on the page No. 8
vi X.25 Co-Processor PCI GTO
Summary of the content on the page No. 9
Contents About This Book ........................... ix Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . ix Chapter 1. Product Description . . . . . . . . . . . . . . . . . 1-1 Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Adapter Cable Options ........................ 1-3 Chapter 2. Installation . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installation
Summary of the content on the page No. 10
Removal and Replacement Procedures ............. 4-17 Co-Processor Adapter Removal ................ 4-18 Co-Processor Adapter Replacement ............. 4-20 Service Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-22 Assembly 1: PCI Co-Processor Adapter .......... 4-22 Assembly 2: Cables and Wrap Plugs ............ 4-23 Appendix A. Special Configuration Information ....... A-1 Creating an ICAPARM.PRM File .................. A-1 Adding an ICAPARM.PRM File Entry for the PCI Co-
Summary of the content on the page No. 11
About This Book This manual contains the following information for the IBM ARTIC X.25 Interface Co-Processor PCI adapter (referred to as the PCI co-processor adapter throughout this book): A description of the adapter and the optional cables Installation requirements and instructions Connector information Problem determination procedures and a list of field-replaceable units (FRUs) Special configuration information. This manual is written for an experienced computer operator or a
Summary of the content on the page No. 12
x X.25 Co-Processor PCI GTO
Summary of the content on the page No. 13
Chapter 1. Product Description The IBM ARTIC X.25 Interface Co-Processor PCI adapter (called PCI co-processor adapter throughout this book), with supporting software, enables the attachment of a PCI-bus-compatible personal computer system to an X.25 Packet-Switched Network so the personal computer system can operate as a packet terminal. Synchronous connection to the network is supported through an interface that can be configured as either X.21 or X.21 bis using a selectable optional cab
Summary of the content on the page No. 14
Specifications Size Length: 181 mm (7.125 inches) Width: 17.5 mm (0.7 inches) Height: 127 mm (5.0 inches) Weight: 0.15 kg (0.33 lbs) Environment Air temperature: Operating: 10 to 35°C (50 to 95°F) Non-Operating: 0 to 60°C (32 to 140°F). Humidity: Operating: 5% through 90%. Electrical Optimum Voltages: Maximum Current: +4.8 V dc to +5.25 V dc 1.2 A +11.3 V dc to +12.7 V dc 10 mA –11.3 V dc to –12.7 V dc 16 mA 1-2 X.25 Co-Processor PCI GTO
Summary of the content on the page No. 15
Adapter Cable Options The following adapter cables are available as options: X.21 Cable (FRU Part Number 16F1865) The X.21 cable is 3 meters (9.9 feet) long. It has a 37-pin female connector at the adapter end and a 15-pin male connector at the other end. X.21 bis (V.24) Cable (FRU Part Number 16F1869) The X.21 bis (V.24) cable length is 3 meters (9.9 feet) long. It has a 37-pin female connector on one end and a 25-pin male connector at the other end. X.21 bis (V.35) Cable (FRU Part N
Summary of the content on the page No. 16
1-4 X.25 Co-Processor PCI GTO
Summary of the content on the page No. 17
Chapter 2. Installation This chapter lists the hardware and software/microcode requirements and provides information for setting up and installing the IBM PCI co-processor adapter. Installation Requirements The PCI co-processor adapter requires the following hardware, software, and microcode. Hardware The PCI co-processor adapter requires a half-length, 5-volt, 32-bit slot. It can be installed into any PCI-compliant computer. The Electronic Emission statement in this manual may be di
Summary of the content on the page No. 18
Handling Static-Sensitive Devices Components for your PCI co-processor adapter can be damaged by static discharges. To prevent this damage, your PCI co-processor adapter is wrapped in an antistatic bag. Observe the following precautions when handling the adapter: Keep the adapter in its antistatic bag until you are ready to install the adapter into your personal computer system. Make the least possible movement with your body to minimize the electrostatic charges created by contact with
Summary of the content on the page No. 19
Step 1: Install the PCI Co-Processor Adapter in the System Unit Use the following steps as general information for installing your PCI co-processor adapter. For specific adapter installation instructions, consult the operating manual or the installation and setup manual for your specific personal computer system. 1. Set all power switches to Off. 2. Unplug the power cords from the wall outlets. 3. Remove the cable-retaining brackets from the rear of the system unit and display. 4. Disconnec
Summary of the content on the page No. 20
11. Install the adapter by holding it by the top and firmly pressing it into the expansion slot. 12. Align the slot in the card-retaining bracket with the hole in the rear panel of the system unit. 13. Insert and tighten the screw to secure the card-retaining bracket to the rear panel of the system unit. 14. If you have other adapters (or options) to install, do so now. Refer to the Operating and Installation documentation provided with your computer system if more information is required
