HP (Hewlett-Packard) Memory Modules user manual

Summary of the content on the page No. 1

Memory Modules
User Guide

Summary of the content on the page No. 2

© Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: July 2006 Document Part Number: 416617-001

Summary of the content on the page No. 3

Table of contents 1 Replacing the memory module 2 Effect of increasing memory on the hibernation file Index ..................................................................................................................................................................... 7 ENWW iii

Summary of the content on the page No. 4

iv ENWW

Summary of the content on the page No. 5

1 Replacing the memory module The computer has one memory module compartment, which is located on the bottom of the computer. The memory capacity of the computer can be enhanced by upgrading the existing memory module in the memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION Electrostatic discharge (ESD) can damage electronic components. Before beginning any proce

Summary of the content on the page No. 6

8. Lift the memory module compartment cover (2) away from the computer. 9. Remove the memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an

Summary of the content on the page No. 7

10. Insert a new memory module: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both

Summary of the content on the page No. 8

13. Tighten the memory module compartment cover screws (3). 14. Replace the battery. 15. Reconnect external power and external devices. 16. Turn on the computer. 4 Chapter 1 Replacing the memory module ENWW

Summary of the content on the page No. 9

2 Effect of increasing memory on the hibernation file When hibernation is initiated, the operating system saves your information to a hibernation file on the hard drive and then turns off the computer. The operating system reserves space on the hard drive to store the hibernation file based on the amount of system memory. When you increase the system memory, the operating system increases the hard drive space reserved for the hibernation file. If you experience problems with hibernation after in

Summary of the content on the page No. 10

6 Chapter 2 Effect of increasing memory on the hibernation file ENWW

Summary of the content on the page No. 11

Index H hard disk drive space 5 hard drive space 5 hibernation 5 hibernation file 5 M memory increasing 5 replacing memory modules 1 memory module inserting 3 removing 2 replacing 1 memory module compartment cover removing 2 replacing 3 ENWW Index 7

Summary of the content on the page No. 12

8 Index ENWW

Summary of the content on the page No. 13

Summary of the content on the page No. 14