Summary of the content on the page No. 1
508 Interface Module User’s Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
508 Interface Module User’s Guide World Headquarters Gilson S.A.S. 19, avenue des Entrepreneurs Gilson, Inc. 3000 Parmenter Street F-95400 VILLIERS LE BEL P.O. Box 620027 France Middleton, WI 53562-0027 USA Telephone: 608-836-1551 Fax: 608-831-4451 www.gilson.com sales@gilson.com, service@gilson.com, training@gilson.com ©2006 Gilson, Inc. All Rights Reserved. LT302003-01
Summary of the content on the page No. 4
Summary of the content on the page No. 5
Table of Contents 1 Introduction Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Standard Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Technical Specifications . . . . . .
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Introduction 1 The Gilson 508 Interface Module connects your computer to many instruments made by Gilson. It permits bi-directional communication by interconverting the RS-232 signal levels used by computers and the RS-422/485 signal levels required by the Gilson Serial Input/Output Channel (GSIOC). Gilson 508 Interface Module User’s Guide 1-1
Summary of the content on the page No. 8
Introduction 1 Unpacking Unpack the interface module and its accessories carefully from the carton. Verify that all parts are included and are undamaged. Do this now, even if the interface module will not be used immediately. Many carriers must receive concealed damaged claims within seven days of delivery. Please retain all packing material so the unit may be shipped safely, if necessary. Standard Equipment Once the instrument and the accessories have been unpacked, you should have the follow
Summary of the content on the page No. 9
Customer Service Introduction 1 Customer Service Gilson, Inc. and its worldwide network of authorized representatives provide customers with the following types of assistance: sales, technical support, applications, and instrument repair. If you need assistance, please contact your Gilson-authorized representative. Specific contact information can be found on the Gilson website at www.gilson.com. To help us serve you quickly and efficiently, please refer to Repair and Return Policies on pag
Summary of the content on the page No. 10
Introduction 1 Technical Specifications Please be aware of the following before connecting the interface module. Warning! Changes or modifications to the interface module not expressly approved by Gilson could void the factory-authorized warranty. The interface module has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC commercial environment. The system interface generates, uses, and can radiate radio frequency energy and, if not i
Summary of the content on the page No. 11
Installation 2 The 508 Interface Module is pre-configured as an RS-232-to-GSIOC interface. Turn off and unplug all computers and instruments before making the connections described in this section. Gilson 508 Interface Module User’s Guide 2-1
Summary of the content on the page No. 12
Installation 2 Electrical Connections Rear Panel 508 Interface Module Rear Panel RS-232 Locate the RS-232 cable provided with the interface module. Attach the male end of the RS-232 cable to the 508 RS-232 input. Tighten the retaining screws. Connect the female end of the RS-232 cable to the computer’s RS-232 serial communications port. Again tighten the retaining screws. GSIOC cable RS-232 Gilson instrument cable 508 computer Interface Module GSIOC Use a GSIOC cable to connect the interface
Summary of the content on the page No. 13
Electrical Connections Installation 2 Refer to the diagram below to connect the 508 to another Gilson instrument using a GSIOC cable. 9-pin female 9-pin female connector; connect connector; to the GSIOC port connect to on the interface GSIOC port of module GSIOC device 9-pin male connector; connect to another GSIOC cable for linking additional GSIOC devices With additional GSIOC cables, you can connect as many as 32 devices. To connect additional GSIOC cables, connect the male connector to th
Summary of the content on the page No. 14
Operation 3 The 508 Interface Module provides RS-232-to-GSIOC interface from the computer. Gilson control software packages let you issue GSIOC commands that communicate with any GSIOC device connected to the interface module. Gilson 508 Interface Module User’s Guide 3-1
Summary of the content on the page No. 15
Operation 3 Status Lights The status lights on the 508 Interface Module are useful for verifying operation. If the Power light is off, power is not being sent to the interface module. If the RS-232 light is flashing, the 508 Interface Module is responding to the RS-232 input. If the GSIOC light is flashing, the 508 Interface Module is receiving a response from a GSIOC device. 3-2 Gilson 508 Interface Module User’s Guide Status Lights
Summary of the content on the page No. 16
Maintenance 4 The 508 Interface Module should not require maintenance. The best precautions for continued operation are to avoid spilling liquids on the connectors and to avoid mechanical strain on the wire connections. Gilson 508 Interface Module User’s Guide 4-1
Summary of the content on the page No. 17
Troubleshooting 5 When using the 508 Interface Module with Gilson-supplied accessories, computers and application software, troubleshooting is simple. Most problems are due to improper connections and installation. Gilson 508 Interface Module User’s Guide 5-1
Summary of the content on the page No. 18
Troubleshooting 5 Troubleshooting Chart No response to RS-232 input • There is no DC power connection at power input. If the Power light is off, check that transformer is plugged into an outlet. • RS-232 connections are not correct. Check for proper cable and connectors. • Check RS-232 port of computer for proper operation with other RS-232 devices. GSIOC devices do not respond to commands • Check GSIOC cable connections. • Check GSIOC device unit ID numbers and baud rate settings (must be 192
Summary of the content on the page No. 19
Repair and Return Policies Troubleshooting 5 Repair and Return Policies Before Calling Us Gilson-authorized representatives will be able to serve you more efficiently if you have the following information: • the serial number and model number of the instruments involved. The serial number is located on the bottom of the unit. • the installation procedure you used • list of concise symptoms • list of operating procedures and conditions you were using when the problem arose • list of other dev
Summary of the content on the page No. 20
Troubleshooting 5 Return Procedure Contact your local distributor’s Customer Service Department to obtain authorization before returning any Gilson equipment. To return a piece of equipment: • Carefully pack the unit to prevent damage in transit. Check with your distributor regarding proper method of shipment. No responsibility is assumed by Gilson or your distributor for damage caused by improperly packaged instruments. Indicate the authorization on the carton and on the packing slip. • A
