Extron electronic VGA Line Driver P/2 DA1 user manual

Summary of the content on the page No. 1

Nominal level .................................. 0.7 Vp-p for RGB
Minimum/maximum levels ......... Analog: 0.3 VDC to 1.5 VDC p-p with no
offset at unity gain
Impedance ........................................ 75 ohms
DC offset ........................................... ±5 mV maximum with input at 0 offset
User’s Guide
Output resolution may vary depending on whether the P/2 DA1
is attached to the computer at startup, and on the type of
computer you are using.
Sync
Input/output type ............

Summary of the content on the page No. 2

Installation The Extron P/2 DA1 is a one input, one output VGA line driver. It 15-pin HD input connector 1 boosts the video signal between a laptop or desktop computer (input Power LED — Lights to indicate that the P/2 DA1 is on. device) and a monitor or large screen projector (output device). 2 Signal LED — Lights to indicate that an input signal is 3 Features being received. � The P/2 DA1 accepts and outputs VGA, XGA, SXGA, RsGsBs, RGsB, RGBS, and RGBHV signals. Gain/peaking switch — Compensa

Summary of the content on the page No. 3

Nominal level .................................. 0.7 Vp-p for RGB Minimum/maximum levels ......... Analog: 0.3 VDC to 1.5 VDC p-p with no offset at unity gain Impedance ........................................ 75 ohms DC offset ........................................... ±5 mV maximum with input at 0 offset User’s Guide Output resolution may vary depending on whether the P/2 DA1 is attached to the computer at startup, and on the type of computer you are using. Sync Input/output type ............