Summary of the content on the page No. 1
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 1
BDP-904
BLU-RAY DISC PLAYER
Summary of the content on the page No. 2
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 2 Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF ELECTRIC SHOCK, This symbol is intended to alert the user to the CAUTION DO NOT REMOVE COVER (OR BACK). NO USER- presence of important operating and maintena
Summary of the content on the page No. 3
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 3 PRECAUTIONS ■Moisture condensation Moisture may form on the lens in the following conditions. • Immediately after a heater has been turned on. • In a steamy or very humid room. • When this unit is moved from a cold place to a warm one. If moisture forms inside this unit, it may not operate properly. In this case, turn on the power and wait about one hour for the moisture to evaporate. ■If there is noise interference on the TV while a broad
Summary of the content on the page No. 4
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 4 cONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT ...................................................................................... 2 • System Connections CONNECTING TO A/V AMPLIFIER OR RECEIVER .................................................................................. 5 CONNECTING TO TV WITH HDMI IN CONNECTOR ............................................................................... 7 CONNECTING TO N
Summary of the content on the page No. 5
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 5 System Connections • Do not connect the AC input cord into the AC outlet when plugging and unplugging connection cords. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio and video cords. • The supplied cords are a (stereo) audio cord and a composite video cord. Other cords are commercially-availa
Summary of the content on the page No. 6
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 6 ■About video/HDMI OUT jacks 1. Connecting AUDIO OUTs • You don’t need to make all kinds of video connections • Connect these jacks to the AUDIO IN jacks of BD(DVD, between components. (e/ g., this unit to A/V amplifier, A/V CD, etc.) of your amplifier. amplifier to TV and so on.) Depending on what kinds of video jacks that A/V amplifier 2. Connecting DIGITAL AUDIO OUTs TV, etc. has, we recommend you to make the same kinds • Connect either
Summary of the content on the page No. 7
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 7 cONNEcTING TO TV WITH HDMI IN cONNEcTOR • If you have a HDMI IN connector equipped TV or projector, etc., connected it to the HDMI OUT connector of this unit using a commercially available HDMI cord. The HDMI connection can carry uncompressed digital video and multi-channel (up to 7.1ch) digital audio signals. • Among the HDMI IN connector equipped TV or projector, etc., some do not support audio output (for examples, projectors). In such
Summary of the content on the page No. 8
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 8 cONNEcTING TO NETWORK • You can enjoy a variety of content with interactive functions by connecting to the internet when playing BD-LIVE compatible discs. • Connect the LAN connector of this unit to your internet source. This unit LAN Internet Modem Broadband router PC ■Notes : • After making a broadband internet connection, you should set the communication setting. (For details, refer to “SETTING THE NETWORK” on page 34.) • When using a
Summary of the content on the page No. 9
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 9 ■Video output resolution • The video output resolution differs depending on the Resolution setting. (For details, refer to “SETTING THE DISPLAY” on page 30.) Video OUTs Resolution setting (Composite) VIDEO OUT COMPONENT OUTs HDMI OUT 1, 2 HDMI Auto 480i(NTSC)(or 576i(PAL)) 1080i* * highest resolution 1, 2 1080p 480i(NTSC)(or 576i(PAL)) 1080i* * 1080p 1, 2 1080i 480i(NTSC)(or 576i(PAL)) 1080i* * 1080i 1, 2 720p 480i(NTSC)(or 576i(PAL)) 720p
Summary of the content on the page No. 10
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 10 ■Audio output signals • The audio output differs as follows, depending on the audio format, output jack and Digital Output settings. (For details, refer to “SETTING THE AUDIO” on page 31.) Digital Analog Audio format Digital Output setting 1 HDMI OUT * OPTICAL/COAXIAL OUTs AUDIO OUTs Bitstream HD Dolby Digital 5.1CH Dolby Digital 5.1CH Bitstream Legacy Dolby Digital 5.1CH Dolby Digital 5.1CH Bitstream Mixed DTS 5.1CH DTS 5.1CH Dolby Digi
Summary of the content on the page No. 11
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 11 Front Panel Controls 1. POWER switch 9. RANDOM button 2. POWER ON/STANDBY button/indicator 10. DISC TRAY 3. OPEN/CLOSE( ) button 11. REMOTE SENSOR 4. PLAY/PAUSE(▶■■ ) button 12. FLUORESCENT DISPLAY 5. STOP(■) button For details, see below. 6. FORWARD/BACKWARD SKIP(▶ ▶ ■/ ■◀ ◀) buttons 13. USB connector 7. INFORMATION button For details, see below. 8. REPEAT button ■FLUORESCENT DISPLAY Media indicators HDMI indicator REPEA
Summary of the content on the page No. 12
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 12 Remote Controls LED POWER ON button STANDBY button NUMERIC buttons CLEAR button GO TO button STEP( ) button SLOW( ) button STOP(■) button PLAY/PAUSE(▶/ ■■ ) button FORWARD/BACKWARD FORWARD/BACKWARD SEARCH(▶ ▶/◀ ◀) buttons SKIP(▶ ▶ ■ / ■ ■◀ ◀) buttons COLOR buttons (RED(A), GREEN(B), YELLOW(C), BLUE(D)) HOME MENU button DISC MENU button CURSOR UP/DOWN/LEFT/RIGHT, OK buttons POP UP MENU button RETURN button SUBTITLE button ANGLE button AUD
Summary of the content on the page No. 13
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 13 REMOTE cONTROL OPERATION RANGE • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. LOADING BATTERIES 1. Remove the cover. 2. Load two batteries (“AAA” size, 1.5V) matching the polarity. • Remove the batteries when they are not used for a long time. • Do not use the rechargeable batteries (Ni-Cd type). 13 ENGLISH
Summary of the content on the page No. 14
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 14 Preliminary Knowledge About Discs PLAYABLE DISc TYPES REGION cODE This unit supports the following discs. • Blu-ray Disc player and BD-ROM or DVD Video discs are assigned region codes according to the region in which Type Logo Playable format/mode they are sold. If the region codes do not match, the disc will not play. BD-ROM BDMV, AVCHD BD-RE/BD-R Blu-ray Disc Area Region Code DVD-Video North America, Central America, South A America, Ko
Summary of the content on the page No. 15
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 15 ■JPEG (“.jpg”, “.jpeg”) NOTES ON cOPYRIGHT • Maximum resolution : 4,272x2,848 pixels. • JPEG format images stored in progressive format cannot be played back. • Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the ■AVI (“.avi”) owner of the copyright. Refer to relevant laws in your • Playable codec : Xvid country. • Maximum size of image : 1920 x 1080@30 fps • This product incorpor
Summary of the content on the page No. 16
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 16 Operations ■Before starting playback • First set this unit as desired for optimum performance, doing the system setting procedures. (For details, refer to "System Settings" on page 28.) • For explanation purposes, this instructions explains the OSD(On-Screen Display) language displayed on TV in English. • Usable discs and files for each operation/function are referred to by the icons : means AVI and WMV files. PLAYING A DISc Example : 1.
Summary of the content on the page No. 17
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 17 Slow playback To start playback from the menu • To select the preferred item, press the CURSOR buttons and press the OK button or press the NUMERIC buttons. • Each time the SLOW ( ) button is pressed, you can play back the disc slowly at 3 step speeds. → Slow x 1/2 → Slow x 1/4 → Slow x 1/8 • To return to normal playback, press the PLAY/PAUSE (▶/■■ ) button. Frame advance playback ■In case of use of the NUMERIC buttons on the remote c
Summary of the content on the page No. 18
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 18 Displaying disc information 2. At the desired search mode, enter the number to be played, pressing the NUMERIC buttons. • During playback, ■When entering title, chapter, track number Examples : For “3” : For “11” : • Then the disc information is displayed on the TV screen. ■When entering the elapsed time Example : During playback of CD You can play a disc from the desired by specifying the elapsed time from the beginning of the current
Summary of the content on the page No. 19
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 19 Playing in random order Playing repeatedly • You can play the tracks in random order. • You can play a current title, chapter, disc or track • During playback, press the RANDOM button. repeatedly. • During playback of the desired chapter/track, press the REPEAT button. • Each time this button is pressed, the random mode changes as follows : • Each time this button is pressed, the repeat mode Random Off : Random mode off (normal playback)
Summary of the content on the page No. 20
BDP-904(A)_091204:BDP-904(A) 2009-12-07 오후 2:17 페이지 20 ■Using the top menu. Switching the audio soundtrack 1. During playback, press the POPUP MENU button. For discs on which multiple audio streams are recorded, audio streams can be switched during playback. Also use this procedure to switch the secondary audio for BD video on which secondary audio is recorded. • It is possible to change the audio language to a different language from the selected one at the System Settings. (For details, r
