Summary of the content on the page No. 1
®
V-MATRIX
MANUAL PART NUMBER: 400-0387-003
VM2382CF
V-MATRIX, 8-OUT, SINGLE CHANNEL
TWISTED PAIR OUTPUT CARD
USER'S GUIDE
Summary of the content on the page No. 2
V-MATRIX TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS................ 2 GENERAL..........................................................2 HANDLING ........................................................2 CLEANING.........................................................2 FCC NOTICE .....................................................2 ABOUT YOUR VM2382CF....................................... 3 TECHNICAL SPECIFICATIONS.............................. 3 PRODUCT DESCRIPTION ...............
Summary of the content on the page No. 3
V-MATRIX 1.5 FCC NOTICE PRECAUTIONS / SAFETY WARNINGS 1 Please read this manual carefully before using your • This device complies with Part 15 of the FCC VM2382CF and keep it handy for future reference. Rules. Operation is subject to the following two conditions: (1) This device may not cause These safety instructions are to ensure the long life of your VM2382CF and to prevent fire and shock harmful interference, and (2) this device must hazards. Please read them carefully and heed all ac
Summary of the content on the page No. 4
V-MATRIX ABOUT YOUR VM2382CF 2 TECHNICAL SPECIFICATIONS 3 Specifications are subject to change. VM2382CF 8-OUT, 1TP Output Card for V-Matrix See www.altinex.com for up-to-date information. The VM2382CF is an 8 Twisted Pair Output card FEATURES/ VM2382CF designed for use with all ALTINEX standards for DESCRIPTION Twisted Pair signal transmission including TP INPUTS receivers like the DA1931CT and MT103-123. The Single Ended Internal Bus Twisted Pair signals from the VM2382CF may be OUTPUTS
Summary of the content on the page No. 5
V-MATRIX PRODUCT DESCRIPTION 4 TOP RETAINER SCREW 8 TWISTED PAIR OUTPUTS (1 TP PER OUTPUT) BOTTOM RETAINER SCREW 400-0387-003 4
Summary of the content on the page No. 6
V-MATRIX APPLICATION DIAGRAMS 5 DIAGRAM 1: TYPICAL SETUP VM2382CF DA1931CT MS8704TP MS8704TP DA1931CT 400-0387-003 5
Summary of the content on the page No. 7
V-MATRIX DIAGRAM 2: INTERNAL VIEW VM2382CF, 8 TP OUTPUTS, SINGLE CHANNEL IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 V-MATRIX 1TP CARD (X8) EDGE RJ-45 CONNECTOR IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 400-0387-003 6
Summary of the content on the page No. 8
V-MATRIX INSTALLING YOUR VM2382CF 6 TROUBLESHOOTING GUIDE 8 Step 1. Turn off power to the V-Matrix enclosure. The VM2382CF unit supplied was carefully tested and no problems were found. However, we would Step 2. Remove a slot cover (VM2005BP) from like to offer the following suggestions: one of the unused slots of the enclosure in order to install the VM2382CF. 8.1 NO DISPLAY Step 3. Slide the VM2382CF into the slot in the Cause 1: The cable connections are wrong. enclosure in order to con
Summary of the content on the page No. 9
V-MATRIX Cause 3: The card has a problem. ALTINEX POLICIES 9 Solution 1: Look at the card and verify that there 9.1 LIMITED WARRANTY/RETURN POLICIES is no damage. If there is no damage, Please see the ALTINEX website at see Solution 2. www.altinex.com for details on warranty and Solution 2: Make sure the display is powered return policies. and turned on. If there is still no 9.2 CONTACT INFORMATION display, see Cause 4. ALTINEX, Inc. Cause 4: There is an unknown problem. 592 Apollo Stree