Summary of the content on the page No. 4
IMPORTANT SAFETY INFORMATION When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as near a bath tub, wash bowl, kitchen sink, laun- dry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lightning. 3. Do not use the telephone to report a
Summary of the content on the page No. 5
Affidavit Requirements for Connection to Digital Services • An affidavit is required to be given to the telephone company whenever digital terminal equipment without encoded analog content and billing protection is used to transmit digi- tal signals containing encoded analog content which are intended for eventual conversion into voice band analog signal and transmitted on the network. • The affidavit shall affirm that either no encoded analog content or billing information is being transmitt
Summary of the content on the page No. 6
Affidavit for Connection of Customer Premises Equipment to 1.544 MBPS and/or Subrate Digital Services For the work to be performed in the certified territory of ______________ (telco name) State of ________________________________ County of ______________________________ I, _______________________ (name), ____________________ (business address), _____________________ (telephone number) being duly sworn, state: I have the responsibility for the operation and maintenance of the terminal equipmen
Summary of the content on the page No. 7
( ) C. An independent training course (e.g., trade school or technical institution) recognized by the manufacturer/grantee of the equipment used to encode analog signals; or ( ) D. In lieu of the proceeding training requirements, the operator(s)/maintainer(S) is (are) under the control of a supervisor trained in accordance with _______________ (circle one) above. I agree to provide ____________________ (telco’s name) with proper documentation to dem- onstrate compliance with the information
Summary of the content on the page No. 8
FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of the FCC rules. There is a label on the equipment that shows the FCC registration number and Ringer Equivalence Number (REN) for this equipment, if applicable. If required, this information must be given to the telephone com- pany. 2. The following information may be required when applying to the local telephone com- pany for leased line facilities. Service Digital Facil
Summary of the content on the page No. 9
6. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty information. If the equipment is causing harm to the network, the telephone company may request this equipment to be disconnected from the network until the prob- lem is resolved or it is certain that the equipment is not malfunctioning. 7. This unit contains no user serviceable parts. 8. The FCC recommends that the AC outlet to which equipment requiring AC power is to be installed is provided wit
Summary of the content on the page No. 10
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi- ronment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction ma
Summary of the content on the page No. 11
Industry Canada Compliance Information Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in front of the certification/registration number) signifies that the Industry Canada technical specifications were met. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the documentation or on the product labeling/markings. The REN assigned to each terminal device indicates the maximum number of terminals t
Summary of the content on the page No. 12
ADTRAN warrants that for five (5) years from the date of shipment to Customer, all products manufactured by ADTRAN will be free from defects in materials and workmanship. ADT- RAN also warrants that products will conform to the applicable specifications and drawings for such products, as contained in the Product Manual or in ADTRAN's internal specifications and drawings for such products (which may or may not be reflected in the Product Manual). This warranty only a
Summary of the content on the page No. 13
Customer Service, Product Support Information, and Training ADTRAN will repair and return this product if within five years from the date of shipment the product does not meet its published specification or the product fails while in service. A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service, RMA requests, training, or more information, use the contact information given below. Repair and Return If you determine that a repair is needed, plea
Summary of the content on the page No. 14
Post-Sale Support Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support web site provides a variety of support services such as a search- able knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools. All of this, and more, is available at: http://support.adtran.com When needed, further pre-sales assistance is available by calling our Technical Suppor
Summary of the content on the page No. 15
!
1
'-2
Summary of the content on the page No. 16
! 5 + <
0 /3+-/ , # 22
8 / +.2
Summary of the content on the page No. 17
"
:,
/0 #/- 6 "" :,
" 05 + " :,
" " /, 57 ( 3 * 6+ 5 !""" /- 6$ :,
" &
57 !""" "/- 6$ :,
" /, &57 !
Summary of the content on the page No. 18
"
Summary of the content on the page No. 19
'1 /3+-/- 6)
01 ,/ , '1 " 5 5 2 , " '1 & 02 , '1 * " "5 +
'1 " 5'( *5
Summary of the content on the page No. 20
Summary of the content on the page No. 1
4202023L1 Smart 16, 2nd, AC Version
4202023L2 Smart 16, 2nd, Dual AC Version
4202023L3 Smart 16, 2nd, DC Version
4202023L4 Smart 16, 2nd, Dual DC Version
Summary of the content on the page No. 2
!" #$# %""&'()*+ (,-( ./
Summary of the content on the page No. 3
The following conventions are used in this manual. 0 Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life.
