Summary of the content on the page No. 1
OWNER’S MANUAL
Blu-ray Disc™/DVD Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP125 / BP125N
P/NO : MFL67475811_1.0
Summary of the content on the page No. 2
Getting Started 2 Getting Started Safety Information CAUTION Use of controls, adjustments or the performance of 1 RISK OF ELECTRIC SHOCK procedures other than those specified herein may DO NOT OPEN result in hazardous radiation exposure. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO CAUTION concerning the Power Cord USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Most appliances recommend they be placed upon a dedicated circ
Summary of the content on the page No. 3
Getting Started Getting Started 3 This device is equipped with a portable battery or Disposal of waste batteries/accumulators accumulator. 1. When this crossed-out wheeled Safety way to remove the battery or the bin symbol is attached to batteries/ battery from the equipment: Remove the accumulators of Your product it means old battery or battery pack, follow the steps they are covered by European Directive 1 in reverse order than the assembly. To prevent 2006/66/EC. contamination of the envi
Summary of the content on the page No. 4
Getting Started 4 Getting Started LG Electronics hereby declares Notes on Copyrights that this/these product(s) is/are y Because AACS (Advanced Access Content in compliance with the essential System) is approved as content protection requirements and other relevant provisions of system for Blu-ray Disc format, similar to use of Directive 2004/108/EC, 2006/95/EC and 2009/125/ 1 CSS (Content Scramble System) for DVD format, EC. certain restrictions are imposed on playback, European Standa
Summary of the content on the page No. 5
Getting Started Getting Started 5 Important Notice for TV colour system The colour system of this player differs according to currently playing discs. 1 For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal. Only the multi system colour TV can receive all signals output from the player. y If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. The multi syst
Summary of the content on the page No. 6
6 Table of Contents 3 System Setting Table of Contents 21 Settings 21 – Initial Setup 21 – Adjust the Setup Settings 1 Getting Started 22 – [DISPLAY] Menu 23 – [LANGUAGE] Menu 2 Safety Information 24 – [AUDIO] Menu 8 Introduction 25 – [LOCK] Menu 8 – Playable Discs and symbols used in 26 – [OTHERS] Menu this manual 9 – About the “7” Symbol Display 9 – Compatibility Notes 4 Operating 10 – File requirement 27 General Playback 11 – AVCHD (Advanced Video Codec High 27 – Using [HOME] menu Definit
Summary of the content on the page No. 7
Table of Contents 7 5 Troubleshooting 36 Troubleshooting 36 – General 37 – Picture 1 37 – Customer Support 37 – Open source software notice 6 Appendix 2 38 Controlling a TV with the Supplied Remote Control 38 – Setting up the remote to control your TV 3 39 Area Code List 40 Language code List 41 Trademarks and Licenses 43 Audio Output Specifications 45 Specifications 4 46 Maintenance 46 – Handling the Unit 46 – Notes on Discs 5 6
Summary of the content on the page No. 8
Getting Started 8 Getting Started Introduction 1 Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. e y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Movie, Music or y Photo files. u y ISO 9660+JOLIET, UDF and UDF Bridge format i y Discs such as movies that can be purchased or rented. r Movie mode and finalized only y DVD-ROM y Supports the dual layer disc also DVD
Summary of the content on the page No. 9
Getting Started Getting Started 9 Note , About the “7” Symbol Display y Depending on the conditions of the “7” may appear on your TV display during recording equipment or the CD-R/RW (or operation and indicates that the function explained DVD±R/RW) disc itself, some CD-R/RW (or in this owner’s manual is not available on that DVD±R/RW) discs cannot be played on the 1 specific media. unit. Depending on the recording software & the y finalization, some recorded discs (CD-R/RW, Compatibili
Summary of the content on the page No. 10
Getting Started 10 Getting Started File requirement Movie files 1 File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx DTS, MP3, SubStation Alpha (.ssa/.txt), “.mkv”, “.mp4”, (standard playback AAC, AC3, MicroDVD (.sub/.txt), VobSub Disc, “.asf ”, “.wmv”, only), XVID, MPEG1 SS, WMA (.sub), SubViewer 1.0 (.sub), USB “.m4v” (DRM H.264/MPEG-4 AVC, SubViewer
Summary of the content on the page No. 11
Getting Started Getting Started 11 Note Note , , y The file name is limited to 180 characters. y A “avi” file which is encoded “WMV 9 codec” is not supported. y Maximum files/Folder: Less than 2000 (total number of files and folders) y This player supports UTF-8 files even it 1 contains Unicode subtitle contents. This y Depending on the size and number of the player can not support the pure Unicode files, it may take several minutes to read the subtitle files. contents on the media. D
Summary of the content on the page No. 12
Getting Started 12 Getting Started Certain System Requirements Regional Code For high definition video playback: This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD High definition display that has HDMI input jack. y discs labelled same as the rear of the unit or “ALL”. 1 y BD-ROM disc with high definition content. y HDMI or HDCP capable DVI input on your display System Select device is required for some content (as specified by disc authors)
Summary of the content on the page No. 13
Getting Started Getting Started 13 Remote control • • • • • • a • • • • • • • • • • • • d • • • • • 1 (POWER): Switches the player REPEAT (h): Repeats a desired 1 ON or OFF. section or sequence. B (OPEN/CLOSE): Opens and AUDIO ([): Selects an audio closes the disc tray. language. 0-9 numerical buttons: Selects SUBTITLE (]): Selects a subtitle numbered options in a menu. language. CLEAR: Removes a number when TITLE/POP-UP: Displays the DVD setting the password. title menu or BD-RO
Summary of the content on the page No. 14
Getting Started 14 Getting Started Front panel 1 a Disc Tray d B (OPEN / CLOSE) b Power indicator e 1 (POWER) c Remote Sensor f USB Port Rear panel a DC IN 12V (AC adapter input) c DIGITAL AUDIO OUT (COAXIAL) b HDMI OUT
Summary of the content on the page No. 15
Connecting Connecting 15 Connecting the AC Connecting to Your TV Adapter If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Connect the unit to the power supply with the Speed HDMI™ Cable). Connect the HDMI jack on supplied AC Adapter. the player to the HDMI jack on a HDMI compatible TV or monitor. Rear of the unit Rear of the unit 2 HDMI cable TV Plug into a power source. y Contact an electrical parts distributor for assistance in selec
Summary of the content on the page No. 16
Connecting 16 Connecting Additional Information for HDMI What is SIMPLINK? y When you connect a HDMI or DVI compatible device make sure of the following: Some functions of this unit are controlled by the - Try switching off the HDMI/DVI device and TV’s remote control when this unit and LG TV’s with this player. Next, switch on the HDMI/DVI SIMPLINK are connected through HDMI connection. device and leave it for around 30 seconds, then switch on this player. Controllable functions by LG TV’s
Summary of the content on the page No. 17
Connecting Connecting 17 Note , Resolution Setting y If your TV does not accept the resolution The player provides several output resolutions for you have set on the player, you can set HDMI OUT jack. You can change the resolution resolution to 576p as follows: using [Setup] menu. 1. Press B to open the disc tray. 1. Press HOME ( ). n 2. Press Z (STOP) for more than 5 seconds. 2. Use a/d to select the [Setup] and press ENTER When you set the resolution to 576i with y ( ). The [Setup] men
Summary of the content on the page No. 18
Connecting 18 Connecting Connecting to an Amplifier via Connecting to an HDMI Output Amplifier Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a Make one of the following connections, depending HDMI cable. on the capabilities of your existing equipment. y HDMI Audio connection (page 18) Rear of the unit Digital Audio connection (page 19) y Since many factors affect the type of audio output, 2 see “Audio Output Specifications” for details (pages 4
Summary of the content on the page No. 19
Connecting Connecting 19 Connecting to an Amplifier via Digital Audio Output Connect the player’s COAXIAL OUT jack to the corresponding in jack on your amplifier using an optional digital audio cable. Rear of the unit 2 Coaxial cable Receiver/Amplifier You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 24.)
Summary of the content on the page No. 20
Connecting 20 Connecting Note , USB device connection y This player supports USB flash drive/ external HDD formatted in FAT32 and NTFS This player can play movie, music and photo files when accessing files (music, photo, movie). contained in the USB device. However, for Blu-ray contents, only FAT32 format is supported. Use the USB flash drive/ external HDD formatted in either FAT32 or Playback content in the USB NTFS when enjoying Blu-ray contents. device y This unit can support up to 4 p
