Summary of the content on the page No. 1
Auto LANstreamer PCI Adapter
04H8095
Installation Guide
Summary of the content on the page No. 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility
Summary of the content on the page No. 3
1 Connecting to a Netware 3.12 Server Windows for Workgroups 1 Connecting to a Netware 3.12 Server Windows for Requirements Workgroups • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name: IBMMPC.DOS Size: 59KB Date: 5/22/95 • Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. • Netware client for DOS and MS-Windows. Device Configuration • Interr
Summary of the content on the page No. 4
1 Connecting to a Netware 3.12 Server Windows for Workgroups • IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Net- ware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation. 9 When the install utility is finished, press to restart the machine. 10 After windows loads, open the “NETWORK” folder, and double-click the “NETWORK SETUP”
Summary of the content on the page No. 5
1 Connecting to Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name: Windows 95 Default • Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration • Interrupt 9 (2) • I/O Address FCC0-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a PCI
Summary of the content on the page No. 6
1 Connecting to Netware 3.12 Server Windows 95 SR2 12 Click “OK” to provide your Computer and Workgroup names. 13 Enter your Computer Name, Workgroup Name, Computer Description, and click on “Close.” 14 Accept the default properties, and click on “OK.” 15 When prompted to insert the Windows 95 CD-ROM, click on “OK.” 16 Set the path to your Windows 95 files and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement C:\MASTERS\WIN95\SYSTEM\CABS\”). 17 When prompted to inse
Summary of the content on the page No. 7
2 Connecting to a Netware 4.11 Server Windows for Workgroups 2 Connecting to a Netware 4.11 Server Windows for Requirements Workgroups • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name: IBMMPC.DOS Size: 59KB Date: 5/22/95 • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. • Netware client for DOS and MS-Windows. Device Configuration • I
Summary of the content on the page No. 8
2 Connecting to a Netware 4.11 Server Windows for Workgroups • IBM Auto LANStreamer PCI Adapter (use the driver on disk 3 of 5, Net- ware DOS requester Installation disk) 7 Highlight option 6 to continue with installation. 8 When prompted, insert the corresponding disks to complete file transfer and driver installation. 9 When the install utility is finished, press to restart the machine. 10 After windows loads, open the “NETWORK” folder, and double-click the “NETWORK SETUP”
Summary of the content on the page No. 9
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name: Windows 95 Default • Novell Netware 4.11 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration • Interrupt 9 (2) • I/O Address FCC0-h Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR adapter card into a
Summary of the content on the page No. 10
2 Connecting to a Netware 4.11 Server Windows 95 SR2 12 Click “OK” to provide your Computer and Workgroup names. 13 Enter your Computer Name, Workgroup Name, Computer Description, and click on “Close.” 14 Accept the default properties, and click on “OK.” 15 When prompted to insert the Windows 95 CD-ROM, click on “OK.” 16 Set the path to your Windows 95 files and click on “OK.” (If you have an HP pre-loaded HDD, set the path statement C:\MASTERS\WIN95\SYSTEM\CABS\”). 17 When prompted to in
Summary of the content on the page No. 11
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 3 Connecting to a Windows NT 3.51 Server Windows for Requirements Workgroups • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • IBM LANStreamer 16/4 PCI TR adapter and drivers diskettes ver 1.01. • Driver Name: IBMMPC.DOS Size: 59KB Date: 5/22/95 • Microsoft Windows NT 3.51 server that supports Net BEUI, NWLink IPX/ SPX, and NWLink NetBIOS transfer protocols. • Netware client for DOS and MS-Windows. Device Confi
Summary of the content on the page No. 12
3 Connecting to a Windows NT 3.51 Server Windows for Workgroups 10 Select “IBM Streamer Family Adapter” and click on “OK.” 11 Verify that “IBM Streamer Family Family Adapter [NDIS2]” is listed under “Network Drivers” and clcik on “Close.” 12 Click on “OK” in the “Network Setup” window. 13 Specify your User Name, Workgroup Name, Computer Name, and click on “OK.” 14 After files copy, click on “OK” to approve the modification of your CONFIG.SYS, AUTOEXEC.BAT, AND SYSTEM.INI files. 15 Click on “R
Summary of the content on the page No. 13
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • IBM AUTO LANStreamer PCI card and drivers disk Driver Name: W95setup.inf Size: 40KB Date: 9/17/96 • Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/ IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols. Device Configuration • I/O Base Address FC00h • Interrupt Request Level 9 Procedure 1 With the HP Vectra turned off install the IBM LANStreamer 16
Summary of the content on the page No. 14
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 11 Insert Disk 1 of 6 of IBM Auto LANStreamer drivers disks and set path to “A:\” (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\LNSTRM\DISK1\”). 12 Click “OK” to continue installation. 13 Click “OK” to the “Network” dialog box, to provide computer / work group names. 14 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network admini
Summary of the content on the page No. 15
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Requirements Workstation • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. Version 3.51 • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name: OEMSETUP.inf Size: 67KB Date: 10/18/96 • Microsoft Windows NT Workstation 3.51 and Service Pack Media. • Microsoft Windows NT Serve
Summary of the content on the page No. 16
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 11 From the “Drop Down List”, scroll down and select “ Requires disk from manufacturer”, then click “Continue“. 12 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 6 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”) 13 Click “OK” at the “Install Driver” dialog box. 14 Select “IBM Streamer Family Adapters”
Summary of the content on the page No. 17
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Requirements Workstation • HP Vectra with Microsoft Windows NT Workstation 4.0 installed. Version 4.0 • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name: OEMSETUP.inf Size: 67KB Date: 10/18/96 • Microsoft Windows NT Workstation 4.0 and Service Pack Media. • Microsoft Windows NT Server 3
Summary of the content on the page No. 18
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 12 Select “IBM Streamer Family Adapters” in the “Select OEM Option” dialog box, and click “OK”. 13 With “IBM Streamer Family Adapters” listed, click on “Next.” 14 Choose the default Protocol TCP/IP, and any additional Network Protocols by clicking the check boxes in the “Network Protocols” dialog box, and click “Next.” (If you do not have the required information, contact your network administrator) 15 Click “OK”
Summary of the content on the page No. 19
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 4 Connecting to a Windows NT Server 4.0 Windows NT Requirements Workstation • HP Vectra with Microsoft Windows NT Workstation 4.0 installed. Version 4.0 • IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04 • Driver Name: OEMSETUP.inf Size: 67KB Date: 10/18/96 • Microsoft Windows NT Workstation 4.0 and Service Pack M
Summary of the content on the page No. 20
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 4.0 11 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert the disk 4 of 6 , Auto LANStreamer PCI drivers disk. (If you have an HP preloaded HDD, set path to “C:\LANDRV\LNSTRM\DISK4\NT\”) 12 Select “IBM Streamer Family Adapters” in the “Select OEM Option” dialog box, and click “OK”. 13 With “IBM Streamer Family Adapters” listed, click on “Next.” 14 Choose the default Protocol TCP/IP, and any additio
