Summary of the content on the page No. 1
BD-H5100
™
Blu-ray Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
Summary of the content on the page No. 2
CLASS 1 LASER pROdUCT Precautions Safety Information This Compact Disc player is classified as a Important Safety Instructions CLASS 1 LASER product. Use of controls, Warning adjustments or performance of procedures Read these operating instructions carefully other than those specified herein may before using the unit. Follow all the safety TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). result in hazardous radiation exposure. instructions listed below. NO USER-SE
Summary of the content on the page No. 3
● 12. Use only with the cart, Disc Storage ■ stand, tripod, bracket, Contents Do not keep in direct sunlight. or table specified by the ■ Keep in a cool ventilated area. manufacturer, or sold ■ Keep in a clean protection jacket SAFETy INFORmATION Network Settings ................................. 12 with the apparatus. and store vertically. System Settings .................................... 13 Warning ................................................. 2 When a cart is used, use Languag
Summary of the content on the page No. 4
Logos of Discs the player can play Region Code Getting Started Both players and discs are coded by region. These regional codes must match for a disc to play. If Before using the User Manual the codes do not match, the disc will not play. The Region Code for this player is displayed on the rear panel of the player. disc Types and Contents your player can play Blu-ray Disc BD-LIVE disc Region Area media disc Type details Type Code Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.
Summary of the content on the page No. 5
● Your player only supports video with a frame rate under 30fps (frames per second). • Limitations ● Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives and USB - Even when a file is encoded by a supported codec listed above, the file might not be HDD. (HUB is not supported.) played if its content has a problem. ● - Normal playback is not guaranteed if the file’s container information is wrong or the Certain USB HDD Devices, multi-card readers and thumb drives
Summary of the content on the page No. 6
AVCHd (Advanced Video Codec High definition) Front Panel ● PLAY/PAUSE BUTTON This player can play back AVCHD format discs. These discs are normally recorded and used in camcorders. ● The AVCHD format is a high definition digital video camera format. STOP BUTTON ● The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional image compressing format. OPEN/CLOSE BUTTON ● Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use
Summary of the content on the page No. 7
Remote Control Connections Tour of the Remote Control Connecting to a TV Turn the player on and off. Turn the TV on and off. Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. After setup, allows you to set the input source on your TV. - Do not connect the power cord to the wall outlet until you have made all the other Press to open and close the disc tray. TV volume adjustment. connections. - When you change the connection
Summary of the content on the page No. 8
Connecting to an Audio System Connecting to a Network Router You can connect the Blu-ray player to an audio system using one of the methods You can connect your player to your network router using one of the methods illustrated illustrated below. below. - Do not connect the power cord to the wall outlet until you have made all the other To use the DLNA network functionality, you must connect your PC to your network as shown in the illustrations. connections. - When you change the connections,
Summary of the content on the page No. 9
in the screen saver mode for more NOTES ✎ than 25 minutes, the power will Settings ■ If you have no network, select SKIp by automatically turn off. pressing the BLUE (d) button, and then go to Step 7. The Initial Settings Procedure 2. Select the desired language, and then Menu Navigation press the button. The Start screen 6. After the player verifies the network, v appears. press the button. v ● The Home screen will not appear 1 7. The Initial Settings Complete window Initial Settin
Summary of the content on the page No. 10
Display Settings Resolution according to the output NOTES ✎ Selects Videos. 1 ■ mode If the TV you connected to the player does 2 Selects Music. You can configure various display options not support Movie Frame or the resolution ● Blu-ray disc/E-contents/digital Contents you selected, the message "If no pictures such as the TV Aspect Ratio, Resolution, etc. Selects Settings. 3 playback are shown after selecting ‘Yes’, please wait Selects Change Device. 4 TV Aspect Ratio for 15 seconds t
Summary of the content on the page No. 11
* If Source Stream is 2ch, "Re-encoded progressive mode pCm downsampling Dolby D" Settings are not applied. Lets you improve picture quality when viewing DVDs. Lets you choose to have 96KHz PCM Blu-ray Discs may include three audio streams : signals downsampled to 48KHz before - Main Feature Audio : The audio soundtrack they are outputted to an amplifier. Choose Audio Settings of the main feature. On if your amplifier or receiver is not - BONUSVIEW audio : An additional compatible with a
Summary of the content on the page No. 12
5. The Auto Function acquires and fills in 4. Select the Internet Protocol Setup field, Network Settings Bd-Live Internet Connection the values for Ip Address, Subnet mask, and then press the v button. etc., automatically. Set to allow or prohibit an Internet Please contact your ISP to find out if 5. Press the ▲▼ buttons to select connection when you use the BD-LIVE your IP address is static or dynamic. If it is manual, and then press the button. NOTES v ✎ dynamic - and most are - we rec
Summary of the content on the page No. 13
■ If you have Anynet+ turned on, when NOTES System Settings Language Settings ✎ you turn off the product, disconnect, ■ The way you use BD-LIVE and and then reconnect the power cable, You can select the language you prefer for the provided contents may Initial Settings the product turns on automatically to re- the On-Screen menu, disc menu, audio, differ, depending on the disc establish the Anynet+ connection. After and subtitles. manufacturer. By using the Initial Settings function,
Summary of the content on the page No. 14
1. Select Auto Upgrade Notification, and Support Settings By USB Change pIN then press the v button. To upgrade by USB, follow these steps: Change the 4-digit password used to 2. Use the ▲▼ buttons to select On, and Software Upgrade access security functions. then press the button. 1. Visit www.samsung.com/ v bluraysupport To change the PIN, follow these steps: If there is a new software version available, the The Software Upgrade menu allows player notifies you with a popup message. you t
Summary of the content on the page No. 15
NOTES ✎ Play Disc Photos Videos Music Change Device Media Play ■ If you insert a disc when playing No Disc a USB device, the device mode 123 3. Use the ▲▼ buttons to select photos, a changes to "Disc" automatically. Playing a Commercially Recorded Empty disc tray Videos, or music. and then press the Disc button. The Photos, Videos & Music v Playing a Disc with User Recorded screen appears listing the content of the Close App 1 App 2 App 3 App 4 App 5 More
Summary of the content on the page No. 16
6. Press the RETURN button one or more NOTES ✎ Buttons on the Remote Control During playback, press times to exit a current screen, exit a ■ Even though the player will display the or button. used for Video playback 1 2 folder, or to return to the Home screen. folders for all content types, it will Skip motion Each time you press the Press the ExIT button to return directly only display files of the Content play or button, the disc 1 2 to the Home Screen. 2 Type you selected in St
Summary of the content on the page No. 17
6. To cancel the play list and return to the 6. If you want to cancel ripping, press the Songs are played in the NUMBER buttons (Audio CD (CD- Home screen, press the RETURN or ExIT v button and then select yes. Select Off order in which they were DA) only) : During Playlist playback, button. 1 No to continue ripping. recorded. press the desired track number. NOTES 7. When ripping is complete, the "Ripping The selected track is played. ✎ The current song is ( ) Track ■ is completed."
Summary of the content on the page No. 18
■ On the Copying screen, you can also However, the sound quality can be 5. When done, move the cursor to Enter NOTES ✎ choose Select All and deselect All. affected by the bit rate of the MP3 at the bottom of the screen, and then ■ Even though the player will display folders file, the size of the photo, and the press the button. v Use Select All to select all item. - for all content types, it will only display files encoding method. This cancels your individual item 6. Repeat the same p
Summary of the content on the page No. 19
15. After you have entered all the required 3. Repeat Step 2 to select more letters or 2. On the Pandora welcome screen, select Using You Tube information, select the I agree check numbers. Activate Pandora, and then press the box, and then press the button. button. v v You can use your Blu-ray player to stream 4. As you add more letters, Netflix will video content from You Tube. To stream 16. Select Start membership, and then start to display matches in the field on 3. If you have a Pando
Summary of the content on the page No. 20
6. To select a video, use the ▲▼◀▶ playing and Controlling Videos Current play List Videos buttons to highlight it, and then press the button. You Tube plays the v 1. To begin, select either discover 1. With a video running and the Control video. Channels or Featured, and then press Panel displayed, press the ▼ button the button. once. The Information screen appears. v NOTES ✎ 2. Use the ◀▶ buttons to select a 2. In the Information screen, press the ■ Select Clear at the top of the scr
