Korg TP-2 user manual

Summary of the content on the page No. 1

Owner’s Manual
KORG INC. 4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan
2004 KORG INC. 1508 CTH Printed in Japan
©
THE FCC REGULATION WARNING (for U.S.A.)
Precautions
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
Location
harmful interference in a residential installation. This equipment
Using the unit in the following locations can

Summary of the content on the page No. 2

Specifications Analog output Input connectors: XLR-3-31 type (+48 V phantom power, switchable), 1/4” TRS phone jack (balanced / unbalanced is Hi-Z) Connectors: ................... XLR-3-32 type, 1/4” TRS phone jack (balanced) Input impedance: 4 k (XLR-3-31), 10 k (TRS phone Jacks), Output impedance: ................................................................................. 150 1 M (TRS phone Jacks is Hi-Z) Nominal level: ...................................................................

Summary of the content on the page No. 3

If you are using a guitar or the line output from an instrument, Introduction connect it to the TRS phone jack. Thank you for purchasing the Korg TP-2 Dual Tube Preamp w/ Optical Compression and Digital Output. In order to enjoy long Balanced phone plug Unbalanced phone plug and trouble-free use, please read this owner’s manual carefully, GND COLD HOT GND HOT and use your TP-2 only as directed. Features 2. Phantom power switch/LED The TP-2 is a dual-channel preamp featuring two 12AX7 vacuum This

Summary of the content on the page No. 4

12. Link switch 2-2. Adjusting the input level Press this switch in to link the two channels together for use with When you’ve finished making your connections, watch the TP- stereo sources. When linked, compression will be applied equally to 2’s level meter while you use the gain trim knob to adjust the both channels whenever either channel exceeds the compressor’s level. Set the trim knob so that the level meter needle does not sensitivity threshold, preserving the stereo imaging. exceed 0 dB