Summary of the content on the page No. 1
User Manual
EURORACK PRO RX1602
Professional Multi-Purpose 16-Input Ultra-Low Noise Line Mixer
Summary of the content on the page No. 2
2 EURORACK PRO RX1602 User Manual Table of Contents Important Safety Instructions ...................................... 3 Legal Disclaimer ............................................................. 3 Limited Warranty ........................................................... 3 1. Introduction ............................................................... 5 1.1 Before you get started ...................................................... 5 1.1.1 Shipment .................................
Summary of the content on the page No. 3
3 EURORACK PRO RX1602 User Manual 9. Do not defeat the safety purpose of the polarized UNDERTAKING OR REPRESENTATION. THIS MANUAL Important Safety or grounding-type plug. A polarized plug has two blades IS COPYRIGHTED. NO PART OF THIS MANUAL MAY Instructions with one wider than the other. A grounding-type plug BE REPRODUCED OR TRANSMITTED IN ANY FORM has two blades and a third grounding prong. The wide OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, blade or the third prong are provided for your
Summary of the content on the page No. 4
4 EURORACK PRO RX1602 User Manual “Support” at behringer. com. If your country is not • connection or operation of the unit in any way (3) This warranty does not detract from the seller’s listed, please check if your problem can be dealt with that does not comply with the technical or safety obligations in regard to any lack of conformity of the by our “Online Support” which may also be found under regulations applicable in the country where the product and any hidden defect. “Support” at beh
Summary of the content on the page No. 5
5 EURORACK PRO RX1602 User Manual 1. Introduction Power is delivered via the cable enclosed with the unit. All requiered safety precautions have been adhered to. Congratulations! With the EURORACK PRO RX1602, you have purchased a multifarious “problem-solver” for signal distribution. This piece of equipment ◊ Please make sure that the unit is grounded at all times. For your own was developed for those among you with the highest expectations, who are in protection, you should never tamper wit
Summary of the content on the page No. 6
6 EURORACK PRO RX1602 User Manual (2) By using the BALANCE control, you can Gain setting: • set up the position of mono signals in the stereo image, and To correctly set the input gain of a channel, please press the MUTE switch (3) of the remaining channels. • regulate the ratio of left/right channel signals when processing stereo signals When recording with digital multi-channel recorders, the peak meter on the recorder should not reach over 0 dB. This is because unlike with digital reco
Summary of the content on the page No. 7
7 EURORACK PRO RX1602 User Manual 3. Applications 3.1 Keyboards sub-mixer Very often, keyborards feature a stereo design, their signals are already pre-amplified and require no sound processing. To avoid using valuable channels of your main mixer for a purpose other than processing mic signals, you can instead use your RX1602 as a sub-mixer. In this case, the output signals of keyboards, samplers or similar sound sources are connected to the inputs (6) of the RX1602. You can route the MA
Summary of the content on the page No. 8
8 EURORACK PRO RX1602 User Manual 3.2 Sub-mix with samplers 3.3 Monitoring multi-track recorders Those of you who work with hardware samplers in studio environments, and who Professional sound cards and multi-track recorders can replay several tracks combine many outputs of these units on a single RX1602, can save yourselves simultaneously. For this purpose, your RX1602 can be ideally used as a space- a lot of frequent plugging in and out of cables. At the same time, you get a saving monitor
Summary of the content on the page No. 9
9 EURORACK PRO RX1602 User Manual 3.4 Small live setup 4. Installation Compact and powerful, feature-rich equipment is optimal for musicians who 4.1 Rack mounting spend a lot of their time on the road. Fig. 3.4 shows an example of a compact solution for keyboard and vocal amplification, whereby a singing guitar player or The BEHRINGER EURORACK PRO RX1602 requires one height unit (1 HU) for being an additional musician can easily be integrated into the mix. installed into a 19" rack. Pleas
Summary of the content on the page No. 10
10 EURORACK PRO RX1602 User Manual 5. AUX Channels Modification Balanced ¼" TRS connector All monitor and effects signals are tapped into post mute and pre fader, strain relief clamp which resembles the function of a pre fader aux channel on conventional mixing sleeve consoles. If you prefer to use the aux channels mainly for effect applications, ring tip we suggest to alter them to post Fader. The difference is that you extract the respective channels’ signal from the effect mix, too, whe
Summary of the content on the page No. 11
11 EURORACK PRO RX1602 User Manual 6. Specifications Audio Inputs Power Supply Input L/R Voltage Type 1/4" TRS connector , USA/Canada 120 V~, 60 Hz electronically balanced Europe/U.K./Australia 230 V~, 50 Hz Impedance approx. 20 kΩ balanced, Japan 100 V~, 50 - 60 Hz 10 kΩ unbalanced General export model 120/230 V~, 50 - 60 Hz Gain range -∞ to +15 dB Power consumption max. 14 W Operating level variable, +4 dBu/-10 dBV (switchable) Fuse 100 - 120 V~: T 630 mA H Max. input level +22 dBu 200
Summary of the content on the page No. 12
We Hear You
