Summary of the content on the page No. 1
Model iD37
The Home System
® ®
For Your iPad, iPhone or iPod
Questions? Visit www.ihomeaudio.com
Summary of the content on the page No. 2
Table of Contents Controls and indicators / iD37 Display..............................................................................................................................1 iD37 Quick Start.................................................................................................................................................................2 Installing/Replacing the Backup Batteries / Battery Warning ............................................................................
Summary of the content on the page No. 3
Controls and Indicators Preset Buttons 1-6 Side Panel Top Panel Radio aux Button Time sync Button Alarm 1 Button EQ Button Alarm 2 Button Reverse/Set Button Raise Volume Button Play/Pause Button Lower Volume Button Forward/Set Button Snooze/Dimmer Button Dock Sleep Button Power/Alarm Reset Button USB charging port Switch charging circuit Rear Panel Time Zone Button Rubber Collar DST switch (to dock iPad/iPhone/iPod without case) Time Set Button AC Adaptor Jack FM antenna Aux-in Jack iD37 Displa
Summary of the content on the page No. 4
iD37 Quick start 1: power 3: clock adjust 2: RESET TEST Place rubber collar over dock to dock an iPad, iPhone or To Set Time using Time Sync: iPod with no case � Dock your iPhone, iPad or iPod touch � Press and release the Time Sync Button on the top of the unit. “SYNC” will flash in the display, Attach AC adaptor cable to DC indicating sync attempt. If sync is jack on back of the unit and plug successful, “SYNC OK” will the other end into a working outlet. appear. If “FAILED” appears
Summary of the content on the page No. 5
Installing/Replacing the Backup Batteries This unit uses “AA” LR06 batteries (pre-installed) for backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the Battery Low Icon located on the right of the display is flashing, it is time to replace the backup batteries. Please make sure the AC adaptor is connected, otherwise all settings may be lost during battery replacement. 1. Open the battery compartment cover located on the bottom
Summary of the content on the page No. 6
Setting Up the Unit Sync Time to iPhone/iPad/iPod The Time Sync feature allows you to sync the time setting on the unit to the time from your iPhone, iPad or recent model iPod Touch, iPod Nano and iPod Classic (older iPod models such as iPod mini do not support this feature). 1. Dock your iPhone, iPad or iPod 2. Press and release the Time Sync Button located on top of the unit. 3. The unit will sync to the time on your iPhone/iPad/iPod. Once sync is completed,“SYNC OK” will appear on the disp
Summary of the content on the page No. 7
Operating the Unit Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off) 1. Once an alarm is armed, the lower part of the display will show the alarm time and the alarm icon. If more then one alarm is armed, the earliest alarm time will show along with both icons. 2. To review the alarm time, press the or Button once. The related alarm time will show on the lower part of the display. 3. During alarm review, press the or Button once to toggle it on or off.
Summary of the content on the page No. 8
Listening to Aux device Using the Aux line-in Jack You can play any audio device that has a line out or headphone jack through the iD37 via the aux line-in Jack. 1. Plug one end of a standard 3.5mm stereo audio patch cord (not included) into the headphone or line-out jack on your device and the other end of the patch cord into the aux line-in Jack located on the back of the unit. 2. Press the Radio/Aux Button once or twice until “aux” appears in the lower part of the display. 3. Turn on and pla
Summary of the content on the page No. 9
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should no
Summary of the content on the page No. 10
Troubleshooting Possible Problem Solution Symptom AC adaptor isn't plugged into a working wall iD37 does not turn on Plug the AC adaptor into a working wall socket and plug the socket or not plugged into the power supply connector into the supply jack on the unit jack on back of the unit If unit is plugged in and doesn't respond, try resetting the unit by iD37 doesn’t respond iD37 requires a reset following these steps: a) remove iPhone/iPad/iPod from dock b) unplug unit from power source
Summary of the content on the page No. 11
Troubleshooting Possible Problem Solution Symptom Sound is distorted Volume level is set too high Decrease the volume If the iPhone/iPad/iPod original sound source (MP3) is old or of poor Sound source is distorted quality, distortion and noise are easily noticed with high-power speakers. Try a different file from a trusted sources such as iTunes If you are using an external sound source like older generation of iPod or iPod Shuffle, try reducing the output volume on the device itself. Also
Summary of the content on the page No. 12
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still
