Summary of the content on the page No. 1
PROFESSIONAL CD PLAYER
IN
OUT
CUE
TIME
USERS MANUAL
Summary of the content on the page No. 2
Important To Safety WARNING: NOTE: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT This CD player uses the semiconductor laser. To allow EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. you to enjoy music at a stable operation, it is recommended to use this in a room of 5 41 - 35 CAUTION: 95 . 1. Handle the power supply cord carefully Do not damage or deform the power supply cord. If it is DATE LABEL damaged or deformed, it may cause electric shock or malfunction when used. When removi
Summary of the content on the page No. 3
Important Safety Instructions 1. Read Instructions – All the safety and operating 16. Damage Requiring Service The appliance should be instructions should be read before this product is serviced by qualified service personnel when: operated. A. The power-supply cord or the plug has been 2. Retain Instructions The safety and operating damaged; or instructions should be retained for future reference. B. Objects have fallen, or liquid has been spilled into the appliance; or 3. Heed Warn
Summary of the content on the page No. 4
Features 10 seconds of anti-shock memory Instant start Seamless loop Pitch range : +/-100% +/-0.1% 4 banks for Sampler and Cue memory, <5 sec. Each bank Mixer between music and sampler Auto cue function (-48dB) 127 *4 sampler (cues) can be memoried and share both sides Selectable elapsed, remain and total remaining time display Single/continuous play Relay play allows consecutive playback between two players Digital Output (S/PDIF digital audio coaxial)
Summary of the content on the page No. 5
1. DISPLAY PANEL LCD-display for displaying the button glows red. 12. PITCH ON/OFF BUTTON – This button is used to different modes and functions. turn the PITCH SLIDER function on and off. 2. SEARCH WHEEL This wheel has 4 forward and 4 13. 4%,8%,16%,100% PITCH SELECT BUTTON reverse speed positions allowing you to quickly scan Press the button in order to change pitch percentage through tracks. The more you turn the wheel in either of 4%,8%,16%,100%. direction the faster you search.
Summary of the content on the page No. 6
POWER AUDIO OUT DIGITAL RELAY ON OFF OUT 21 22 23 24 25 25 24. POWER SWITCH Press this button to activate 21. AUDIO OUT-SOCKETS This analogue the unit.(i.e. Power ON/OFF) signal requires RCA (left & right) connections. 25. AC CONNECTION Plug in the power supply Connect this output to the respective input of cable here. your mixer (Line/Aux). 22. DIGITAL OUT-SOCKET This digital signal requires one SP/DIF (75 Ohm) connection. Connect this output to the respective input of your
Summary of the content on the page No. 7
Set-up 1.Checking the Contents Check the carton and packaging contents for the following items: 1. Tabletop unit 2. Operating instructions 3. One RCA cable. 4. One AC power cord. 2. Installing the Unit 1. Place your unit on a flat leveled surface. 2. Be sure the player is in a well-ventilated area where it will not be exposed to direct sunlight, high temperatures, or high humidity. 3. Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable
Summary of the content on the page No. 8
Operating instructions 1.Opening and Closing source of music. This operation only works when the power is on. If track is changed before pressing play, the cue point is Press the OPEN/CLOSE button to open or close the disc changed to the new starting point. tray, or press PLAY button, the disc tray automatically If you pause during playback this also sets the new cue closes. point. If tray is not closed after 60 seconds it will close 9.Frame Search automatically and pause. This is don
Summary of the content on the page No. 9
Operating instructions 12.Seamless Loop Play (Cont.) jack are connected, the operation for both player as a- (Must be in SEAMLESS LOOP mode). If a SEAMLESS following: LOOP has not been created, follow instructions on this Left player will return to standby mode at CUE point page for creating a SEAMLESS LOOP. If a SEAMLESS automatically when move CROSS FADER from left to LOOP has already been created, press RELOOP right to start playback on right player. BUTTON to reenter the SEMALESS L
Summary of the content on the page No. 10
Specifications 1. APPLICATION Model S-350 2. POWER SOURCE AC 230V, 50Hz, 14W 3. DIMENSIONS 348 (W)x 246 (D)x 106 (H) mm 4. WEIGHT 3 Kgs 5. CHARACTERISTICS (TEST DISC: TCD-782, LOAD=47Kohm) ITEM TYPICAL LIMIT CONDITION (1) Output level 1Vrms+/-0.5dB 1Vrms+/-1dB 1KHz,0dB (2) Channel balance within 0.5dB within1dB 1KHz,0dB (3) Frequency response 20-20KHz,+/-0.5dB 20-20KHz,+/-1dB 0dB output (4) De-emphasis response +/-2.5dB +/-3dB 16KHz,-20dB (5) Channel separat
