Summary of the content on the page No. 1
MD6459
User’s Guide
PERSONAL COMPACT DISC PLAYER
WITH 60 SECOND DIGITAL MOTION
PROOF ANTI-SHOCK PROTECTION
Before operating this product,
please read these instructions completely.
Summary of the content on the page No. 2
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock t
Summary of the content on the page No. 3
SAFETY PRECAUTIONS (CONTINUED) INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. Howeve
Summary of the content on the page No. 4
S E I R T A S S U S D O N I C Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
Summary of the content on the page No. 5
LOCATION OF CONTROLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1. LINE OUT Jack 9. PHONES Jack (Side of Unit) 2. Display 10. VOLUME Control 3. PLAY/PAUSE (®p)/POWER 11. DBBS (Bass Boost) Switch ON Button 12. CD Compartment 13. CD Door OPEN Switch 4. SKIP/SEARCH (o) Button 14. STOP (n)/POWER OFF 5. DC 4.5V Jack (Rear of Unit) Button + – 15. PROG (Program) Button 16. ESP Button 6. SKIP/SEARCH (n) Button 7. MODE Button 8. Battery Compartment (Bottom of Unit) 4
Summary of the content on the page No. 6
+ – – + POWER SOURCES This CD player requires either two (2) “AA” batteries (not included) or an AC adapter (not included). BATTERY INSTALLATION The battery indicator ( ) will blink in the CD display when the batteries are low and need replacing. 1. Open the battery compartment door by pressing out and then lifting up. To prevent the possibility of losing the cover, it cannot be removed. 2. Insert two (2) “AA” batteries (not included) according to the polarity diagram inside the battery compartm
Summary of the content on the page No. 7
OPERATION BASS BOOST TURNING POWER ON/OFF 1 1 1 2 To emphasize the bass, slide the To turn the unit on, press the DBBS switch to the ON position. For PLAY/PAUSE ( )/POWER ON 1 normal bass, slide the DBBS switch to button ∂. 1 1 the OFF position. To turn the unit off, press the STOP (n)/POWER OFF button ∑. 1 AUTO POWER OFF When the unit is stopped (Standby mode) for approximately one minute, the power will automatically turn off. Sound Through a Home Audio System By using a home audio connection
Summary of the content on the page No. 8
3 3 CD OPERATION TO PLAY A CD (Standard, CD-R and CD-RW) 2 1 Open the CD compartment lid by While the unit is off, press the sliding the CD OPEN switch to the PLAY/PAUSE ( )/POWER ON button right. Gently press a disc, label side up, to start playback. To pause PLAYBACK, 1 onto the spindle until it locks in place. press the PLAY/PAUSE ( )/POWER Close the CD compartment lid. Insert ON button again, the display will blink. 1 2 headphones into the PHONES jack. Press once again to resume playback. 1
Summary of the content on the page No. 9
CD OPERATION (CONTINUED) 60 SECOND MOTION PROOF ELECTRONIC ANTI-SHOCK SYSTEM This CD player has a built-in Anti-Shock System that cuts down on CD skipping, which is useful when using the CD player in the car or while jogging/walking. Follow the steps below to activate and understand the Anti-Shock System: 2 1 With a CD inserted, press the Open the CD compartment lid by sliding the CD OPEN switch to the PLAY/PAUSE (®p)/POWER ON right. Gently press a disc, label side button to turn the unit on.
Summary of the content on the page No. 10
3 CD OPERATION (CONTINUED) 5 6 If the CD player is subject to vibration If all the bars disappear and the CD during playback, the bars will player is subject to immediate vibration, disappear one by one. During the the unit may skip. vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc. At this time, the indicator will probably show fewer bars indicating the music signals stored in memory are low. 7 8 If
Summary of the content on the page No. 11
3 3 3 3 2 2 2 2 1 1 3 3 1 1 3 3 CD OPERATION (CONTINUED) TO REPEATEDLY PLAY BACK ONE TRACK 1 2 4 With a CD inserted, press the The unit will then play the same track PLAY/PAUSE ( )/POWER ON over and over until the STOP (n)/POWER OFF button ∂ is pressed. button ∂ to turn the unit on, then select Adjust the VOLUME control ∑ and a track using the SKIP/SEARCH ∑ or ∏ button. Press the MODE DBBS switch ∏ as desired. 4 button π once; the Repeat 1 indicator ALL 1 will appear in the display. TO REPEATE
Summary of the content on the page No. 12
2 2 1 1 CD OPERATION (CONTINUED) INTRO PLAY 1 2 4 3 1 With a CD inserted, press the Press the PLAY/PAUSE ( )/POWER PLAY/PAUSE ( )/POWER ON ON button ∂ to begin playback. The unit button ∂ to turn the unit on and press will play the first 10 seconds of each the STOP (n)/POWER OFF button ∑ track. Adjust the VOLUME control ∑ to stop auto playback. Press the MODE and DBBS switch ∏ as desired. Press button ∏ three times; the INTRO the STOP (n)/POWER OFF button π indicator will appear in the display
Summary of the content on the page No. 13
2 1 1 1 CD OPERATION (CONTINUED) TO PROGRAM THE MEMORY (UP TO 24 TRACKS) 2 1 2 1 3 With a CD inserted, press the PLAY/PAUSE ( )/POWER ON Select the first track to be played back button ∂ to turn the unit on and press using the SKIP/SEARCH ∂ or the STOP (n)/POWER OFF button ∑ to ∑ button, then press the PROG button ∏ stop auto playback. Press the PROG again. Repeat this step to program button ∏; the PROG indicator will blink additional tracks up to a maximum of 24 in the CD display. tracks. 3 4
Summary of the content on the page No. 14
C B L E E N A CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc. If necessary, use a CD cleaning kit. • If a compact
Summary of the content on the page No. 15
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not Weak or dead batteries Replace batteries and insert turn on. or inserted incorrectly. correctly. Weak or dead Re- Recharge or replace chargeable batteries. batteries (if used). AC adapter Check AC adapter not connected. connection. Disc will not play. CD compartment Close CD compartment. not closed. Disc inserted Reinsert disc correctly. incorr
Summary of the content on the page No. 16
SPECIFICATIONS Power requirements......................................2 x LR6 "AA" alkaline battery DC In 4.5V adapter (center positive) D/A conversion...................................1-bit DAC eight times oversampling Frequency response ............................................20~20,000Hz (+1,-3 dB) Anti-shock. .......................................................................60 second buffer Output level...........................................Line output: 0.6 Vms (47K ohms) Headp
Summary of the content on the page No. 17
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memorexelectronics.com
