Summary of the content on the page No. 1
UCD-100
CD/USB MP3 PLAYER
Operating Instructions
American Audio®
6122 S. Eastern Ave.
Los Angeles, CA 90040
Rev. 5/11
Summary of the content on the page No. 2
CONTENTS SAfEtY PRECAUtIOnS........................................................................................................................3 ELECtRICAL SAfEtY PRECAUtIOnS.................................................................................................4 PRODUCt InfORMA tIOn.....................................................................................................................5 CUStOMER SUPPOR t ................................................................
Summary of the content on the page No. 3
SafETY PrECauTiONS CAUtIOn: tO PREVEnt ELECtRIC SHOCK nOtE: this CD player uses a semiconductor DO nOt USE tHIS (POLARIZED) PLUG WItH laser. It is recommended for use in a room at An EXtEnSIOn CORD, RECEPt ACLE, OR the following temperature: 41˚f - 95˚f / 5˚C - OtHER OUtLEt UnLESS tHE BLADES CAn 35˚C BE CAREf ULLY In SERt ED t O PREVEnt BLADE EXPOSURE CAUtIOn: 1. Handle the power supply cord carefully. Do not damage or deform; it may cause electric AttEntIOn: POUR PREVEnIR LES CHO
Summary of the content on the page No. 4
ELECTriCaL SafETY PrECauTiONS ELECtRICAL PRECAUtIOnS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is equilateral triangle, is intended to alert the user to the SHOCK, DO NOT REMOVE THE COVER (OR BACK). intended to alert the user to the presence of important presence of uninsulated "dangerous voltage" within the THERE ARE NO USER SERVICEABLE PARTS opera
Summary of the content on the page No. 5
PrODuCT iNfOrMa TiON I. Read Instructions - All the safety and operat- ing instructions should be read before the CD WarraNTY iNfOrMa TiON Player is operated. the safety and operating the UCD-100 carries a OnE year (365 days) instructions should be saved for future limited warranty. this warranty covers parts reference. and labor. Please fill out the enclosed warranty card to validate your purchase. All returned 2. Heed Warnings - All warnings on the service items whether under warr
Summary of the content on the page No. 6
uNPaCKiNg Every UCD-100 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the car- ton appears to be damaged, carefully inspect your player for any damage and be sure all equipment necessary to operate the player has arrived intact. In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions. Please
Summary of the content on the page No. 7
SET-uP uSB iNfOrMa TiON: • Make sure your uSB device has only MP3 files on it. There cannot be any other type of files on your uSB device, NO photo files, etc... • if you are using a SD Card via uSB SD Card reader, you must remove the uSB SD Card reader first to change SD Card's. Please do not remove the SD Card from the uSB SD Card reader while the uSB card reader is still connected to the unit. • Only supports fa T/fa T32 formatted devices. SD CarD iNfOrMa TiON: • Make s
Summary of the content on the page No. 8
fuNCTiONS aND CONTrOLS 1 2 3 4 5 6 7 8 9 10 19 18 17 16 15 14 13 11 12 21 20 22 23 24 25 26 27 28 38 29 37 30 36 31 32 35 34 33 a. frONT PaNEL CONTrOLS 1. TRANSPORT TRAY - this tray is used to load and unload a compact disc into the drive mechanism. the tray is opened and closed by pressing the OPEN/CLOSE buttON (3) . never attempt to force the transport tray open or closed when the power is turned off. 2. USB PORT 1 - this is USB port 1 is where you can insert a USB stick, USB SD Card reade
Summary of the content on the page No. 9
fuNCTiONS aND CONTrOLS for at least 2 seconds to enter the internal menu. Use the fOLDER/tRACK KnOB (14) to scroll through the internal menu. 6. SGL/CTN - this button allows the unit’s play mode to change between Single and Continuous. In single mode the unit will play a single track and return to cue mode. In continuous mode the unit continues to play track by track. 7. LIqUID CRYSTAL DISPLAY (LCD) - this high quality LCD Indicates all the unit functions (play, pause, cue, etc..,), as th
Summary of the content on the page No. 10
fuNCTiONS aND CONTrOLS 14. FOLDER/TRACK BUTTON & FOLDER/TRACK KNOB - this button is used to toggle the fOLDER/tRACK KnOB between folder and track search. When the LED of the fOLDER BUttOn is lit, the player is in fOLDER search mode. When the unit is in track search mode, turn the knob clockwise to search forward, and counter- clockwise to search backwards. If you press the knob in and turn it while in track mode, you can skip ahead 10 tracks. Example: if you are at t rack #1, pressing the k
Summary of the content on the page No. 11
fuNCTiONS aND CONTrOLS C. LCD DiSPLaY - 24. CUE INDICATOR - this indicator will glow when the unit is in CUE mode and will flash every time a new CUE POInt is set. 25. FOLDER DISPLAY - this indicates which folder you are in. 26. TIME METER - these indicators will detail the current Minutes, Seconds, and frames. the meter will dis - play either the elapse, total, or remaining time of a track or the entire disc. the display time will depend on the selected time function. the selected time func
Summary of the content on the page No. 12
fuNCTiONS aND CONTrOLS - rEMOTE 52 39 40 41 51 42 50 49 48 43 47 46 44 45 the Max. Range of the remote is 20ft. the beam can be affected by the angle, always aim the re - mote directly to the IR receiver. 39. SOURCE SELECTOR - Press this button to select your desired playback source. Select either CD Player, USB 1, or USB 2. the source indicator LED will light when the selected source is activate. You can also use this button to record a demo from the current playing track. 40. IN, OUT, & RE
Summary of the content on the page No. 13
fuNCTiONS aND CONTrOLS - rEMOTE 44. KEY LOCK - this button is used to toggle the Master t empo function on and off. 45. MUTE BUTTON - this button is used to mute playback. 46. vOLUME CONTROL BUTTONS - these buttons are used to adjust the volume of internal attenu - ator. 47. FOLDER SEARCH BUTTONS - these buttons are used to scroll through the different folders on your MP3 disc or USB device. 48. TRACK SEARCH BUTTONS - these buttons are used to scroll either forwards or backwards through a tra
Summary of the content on the page No. 14
BaSiC OPEra TiON 1. OPENING AND CLOSING THE DISC TRAY this is an electronic operation and can only work when the power is on. Press the OPEN/CLOSE buttON (3) to open or close the disc tray. Pressing the PLay/P auSE buttON (15) , will also automatically close the tray if it is open and immediately cue any CD that is in it. If the transport tray is left open for more than 60 seconds it will close automatically to prevent accidental damage to the transport. Again if a CD is left in the transpor
Summary of the content on the page No. 15
BaSiC OPEra TiON 3. LOADING USB DEvICE the UCD- 100 can only read SDHC (High Capacity) Cards up to 32GB. The file format is Mp3 only. When connecting a USB stick, USB card reader, or external hard drive make sure you are correctly lined up with the USB port and gently insert the USB connection. t o disconnect a USB drive, stop playback and “pull out” the USB connection. Please see page 7 for uSB information. CAUTION: • NEVER remove a USB device while in PLAY mode. figure 4 4. SELECTING YOU
Summary of the content on the page No. 16
BaSiC OPEra TiON 6. STARTING PLAYBACK Insert an audio CD as describe on the previous page (LOaDiNG DiSCS). Pressing the PLay/P auSE buttON (15) with an audio CD inserted will immediately start playback. the point at which playback starts (cue point) will automatically be stored in the memory as the cue point. the unit will return to this cue point (the point at which playback started) when the CuE buttON (16) is pressed. figure 7 7. STOPPING PLAYBACK Stopping playback will not stop the driv
Summary of the content on the page No. 17
BaSiC OPEra TiON 9. AUTO CUE ”Cueing” is the action of preparing for playback. the unit is designed to automatically cue at the first audible signal on the first of a disc when a disc is inserted. If a track is selected before a disc is inserted, the unit will automatically cue to the first audible signal for the selected track. 10. SETTING CUE POINTS A cue point is the exact point playback will begin when the PLay/P auSE buttON (15) is pressed. A cue point may be created anywhere on a dis
Summary of the content on the page No. 18
BaSiC OPEra TiON 11. SETTING OUTPUT vOLUME LEvEL this function lets you set the output volume level. Press the traCk kNOb (14) and press either the (-) PitCh bEND buttON or the (+) PitCh but - tON (11) depending on if you want to raise or lower the volume. figure 13 12. CHANGING THE TIME DISPLAY (26)/TIME BAR (27): the time may be displayed in three different modes; t otal Remain, Remain, and Elapsed. During normal play- back, pressing the tiME buttON (5) as in figure 14, will change the tim
Summary of the content on the page No. 19
BaSiC OPEra TiON 13. PITCH ADJUSTMENTS this function will increase or decrease the playback speed or "PItCH ," of a track. the maximum pitch bend percentage allowed is +/-16%. the PitCh SLiDEr (8) is used to decrease or increase the playback pitch. If the slider is move up (towards the top of the unit) the pitch will decrease, if the slider is moved down (towards the bottom of the unit) the pitch will increase. activating the Pitch Slider (8): t o activate the PitCh SLiDEr (8) , you must t
Summary of the content on the page No. 20
BaSiC OPEra TiON 14. PITCH BEND this function will momentarily increase or decrease a tracks playback speed using the (-) & (+) PitCh but - tONS (11) . the maximum pitch bend percentage allowed is +/-16%. the pitch bend function will work in con - junction with the PitCh SLiDEr 118) pitch setting. for example, if the PitCh SLiDEr (11) is set to a 2% pitch gain the pitch bending process will begin at 0% and will continue to the maximum of -/+16%. PITCH BEND BUTTONS (11) the (+) PitCh bEND buttO
