Summary of the content on the page No. 1
FM/AM Digital Media Player
4-190-902-31(1)
FM/AM
Digital Media Player
US
Operating Instructions
FR
Mode d’emploi
ES
Manual de instrucciones
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. DSX-S300BTX Serial No.
To cancel the demonstration (Demo) display, see p
Summary of the content on the page No. 2
This device complies with Part 15 of the FCC Be sure to install this unit in the dashboard of Rules and RSS-Gen of IC Rules. Operation is the car for safety. For installation and subject to the following two conditions: (1) this connections, see the supplied installation/ device may not cause harmful interference, and connections manual. (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Warning This transmitter
Summary of the content on the page No. 3
12 TONE ANALYSIS and its Apple, Macintosh and iTunes are trademarks of logo are trademarks of Sony Apple Inc., registered in the U.S. and other Corporation. countries. “WALKMAN” and “WALKMAN” logo are MPEG Layer-3 audio coding technology and registered trademarks of patents licensed from Fraunhofer IIS and Thomson. Sony Corporation. Warning if your car’s ignition has no ACC position SensMe and the SensMe logo are Be sure to set the Auto Off function (page 40). trademarks or registered
Summary of the content on the page No. 4
Table of Contents Getting Started USB devices Notes on Bluetooth . . . . . . . . . . . . . . . . . . . . . . 7 Playing back a USB device. . . . . . . . . . . . . . . 20 Resetting the unit. . . . . . . . . . . . . . . . . . . . . . . . 7 Playing back via the USB (internal) Canceling the Demo mode . . . . . . . . . . . . . . . . 8 connector . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Preparing the card remote commander . . . . . . . 8 Playing back via the USB (external) Setting the cl
Summary of the content on the page No. 5
Searching for a track Sound Settings and Setup Menu Searching a track by name Changing the sound settings . . . . . . . . . . . . . . 37 — Quick-BrowZer™. . . . . . . . . . . . . . . . . . . . 28 Adjusting the sound characteristics . . . . . . 37 Searching by skip items Enjoying sophisticated sound functions — Jump mode. . . . . . . . . . . . . . . . . . . . . . . 28 — Advanced Sound Engine . . . . . . . . . . . . . . 37 Searching by alphabetical order Selecting the sound quality — Alphabet se
Summary of the content on the page No. 6
Support site If you have any questions or for the latest support information on this product, please visit the web site below: http://esupport.sony.com http://www.sony.com/mobileAV Provides information on: � Models and manufacturers of compatible digital audio players � Supported MP3/WMA/AAC files � Models and manufacturers of compatible cellular phones and the FAQ about Bluetooth function � System requirements for the software in the supplied CD-ROM 6
Summary of the content on the page No. 7
Radio frequency exposure Getting Started RF signals may affect improperly installed or 2 inadequately shielded electronic systems in cars, such as electronic fuel injection systems, electronic Notes on Bluetooth antiskid (antilock) braking systems, electronic speed control systems or air bag systems. For installation Caution or service of this device, please consult with the IN NO EVENT SHALL SONY BE LIABLE FOR manufacturer or its representative of your car. Faulty ANY INCIDENTAL, INDIRE
Summary of the content on the page No. 8
Canceling the Demo mode Detaching the front panel You can cancel the demonstration display which You can detach the front panel of this unit to appears during turning off. prevent theft. 1 Press and hold the multi way encoder. Caution alarm The setup display appears. If you turn the ignition switch to the OFF 2 Rotate the multi way encoder to select position without detaching the front panel, the “Demo,” then press it. caution alarm will sound for a few seconds. The alarm will only sound if t
Summary of the content on the page No. 9
Attaching the front panel Place the hole A of the front panel onto the spindle B on the unit, then lightly push the left side in. Press (SOURCE/OFF) on the unit to operate the unit. Note Do not put anything on the inner surface of the front panel. 9
Summary of the content on the page No. 10
Quick Guide for Bluetooth function For full details on operation, see “Bluetooth (Handsfree calling and Music streaming)” (page 30) and the Bluetooth device operating instructions. 3 steps to Bluetooth function 1 Pairing First, register (“pair”) the Bluetooth device (cellular phone, etc.) with this unit. Pairing is no longer required after the first time. 2 Connecting After pairing is made, connect this unit and the Bluetooth device. Depending on the device, connection is automatically made
Summary of the content on the page No. 11
Buttons and icons Icons Multi way encoder Icon status descriptions Lit Bluetooth signal is on. Flashing Pairing is in standby mode. None Bluetooth signal is off. Lit Connected to a cellular phone. Flashing Connection is in progress. None No cellular phone is connected for handsfree calling. Lit Connected to a device. Flashing Connection is in progress. None No device is connected for music streaming. Lit Some unread SMS messages exist. Flashing A new SMS message has been received. None No unread
Summary of the content on the page No. 12
1 Pairing Operated Operation device Press and hold (BLUETOOTH) for 2 or more seconds. 1 t Search for this unit. 2 3 DR-BT30Q Sony Select “Sony Automotive.” Automotive XXXXXXX If passkey input is required on the display of the device to be connected, 4 input “0000.” Follow the display directions. 5 6 (Pairing successful) 2 Connecting Operated Operation device Press (BLUETOOTH). 1 t Connect to this unit using a cellular phone. 2 t Connect to this unit using an audio device. t 12
Summary of the content on the page No. 13
Note You can connect from this unit to a Bluetooth device (page 31). If you cannot connect from this unit to the Bluetooth device, start pairing again. 3 Handsfree calling and Music streaming Handsfree calling To Operation Receive a call/end a call Press the multi way encoder. Reject a call Press (SOURCE/OFF). Redial 1 Press (SOURCE/OFF) repeatedly until “Bluetooth Phone” appears. t 2 Press and hold the multi way encoder for 2 or more seconds. Transfer a call Press (MODE). Music streaming T
Summary of the content on the page No. 14
Location of controls and basic operations Main unit Front panel removed E Multi way encoder (ENTER/SOUND/ MENU/ (handsfree)/ (end call) button) Rotate to: Adjust the volume/select a menu This section contains instructions on the location item. of controls and basic operations. For details, see Push up/down/left/right to: Select a menu the respective pages. item. 1 A SOURCE/OFF button* Press to: Enter sound setting/apply a setting. Press to turn on the power/change the source Press and hold
Summary of the content on the page No. 15
4 6 Bluetooth Audio* : M PTY/CAT button* page 19 Push left/right to: To select PTY in RDS. – Skip tracks (push). N DSPL (display)/SCRL (scroll) button – Reverse/fast-forward a track (push and page 21, 27 hold). To change display items (press); scroll the Bluetooth Phone: display item (press and hold). Press to receive/end a call. Press and hold to redial. O Microphone page 33 Note F Receptor for the card remote Do not cover the microphone, or the handsfree commander function may not work
Summary of the content on the page No. 16
Remove the insulation film before use (page 8). RM-X306 Card Remote Commander A CALL/ (handsfree) button To change the source (Bluetooth Phone). Bluetooth Phone: To receive a call. 1 0 1 B SRC (source) button* To turn on the power; change the source 2 qa 2 (Radio/USB/SensMe™* /Bluetooth Audio/ 3 qs Bluetooth Phone). 4 C ENTER button qd To apply a setting. 5 D MODE button qf 6 1 Press to: Select the radio band (FM/AM)* / qg switch the USB device (internal/external). 7 Press and hold to: Enter/c
Summary of the content on the page No. 17
I button page 32, 33 J OFF/ (end call) button To turn off the power; stop the source; end or reject a call. K BLUETOOTH button page 30 For Bluetooth signal on/off, pairing. L M (+)/m (–) buttons The same as pushing the multi way encoder up/down on the unit. M < (.)/, (>) buttons The same as pushing the multi way encoder left/right on the unit. N SCRL (scroll) button To scroll the display item. O SOUND button To enter sound setting. P ATT (attenuate) button To attenuate the sound. To cancel,
Summary of the content on the page No. 18
Receiving the stored stations Radio You can list up the frequency. Storing and receiving stations 1 Select the band, then press (BROWSE). Caution The preset list appears. When tuning in stations while driving, use Best 2 Push the multi way encoder up/down Tuning Memory (BTM) to prevent an accident. to select the desired station. Storing automatically — BTM 1 Press (SOURCE/OFF) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3,
Summary of the content on the page No. 19
3 Press the multi way encoder. RDS The unit starts to search for a station broadcasting the selected program type. Overview Type of programs FM stations with Radio Data System (RDS) News (News), Information (Information), service send inaudible digital information along Sports (Sports), Talk (Talk), Rock (Rock), with the regular radio program signal. Classic Rock (Classic Rock), Adult Hits (Adult Hits), Soft Rock (Soft Rock), Top 40 Display items (Top 40), Country (Country), Oldies (Oldie
Summary of the content on the page No. 20
3 Connect the USB device to the USB USB devices connector. For details on the compatibility of your USB device, visit the support site. Support site http://esupport.sony.com http://www.sony.com/mobileAV � MSC (Mass Storage Class) type USB devices compliant with the USB standard can be used. � Corresponding codec is MP3 (.mp3), WMA (.wma), AAC (.m4a) and AAC (.mp4). � Backup of data in a USB device is 4 Slide in the TUNE TRAY by pressing recommended. PUSH CLOSE on the TUNE TRAY until Notes
