Summary of the content on the page No. 1
NBW-100U
2.4GHz Wireless Presenter
User’s Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Table of Contents Safety Instructions Always read the safety instructions carefully Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. Never point the presenter’s laser light at people, especially their eyes, or look directly into the laser light to avoid possible eye damage. Avoid pointing the presenter’s laser beam at a mirror or other highly reflective surface. Keep this User’s Manual for future reference K
Summary of the content on the page No. 4
Table of Contents Table of Contents 1. Introduction .......................................................................................................3 Features ............................................................................................................................. 3 Package Contents .............................................................................................................. 3 System Requirements....................................................
Summary of the content on the page No. 5
NBW-100U 2.4GHz Wireless Presenter User’s Manual 1. Introduction The Vantec NBW-100U wireless presenter is an ideal presentation tool to make your presentations more efficient and effective. Using RF technology, it allows you to wirelessly control your computer from a distance of up to 15 meters. The integrated laser pointer helps highlight your key points and the mini stick gives full cursor control. Moreover, it provides function keys in two modes: PowerPoint and Windows Media Player
Summary of the content on the page No. 6
NBW-100U 2.4GHz Wireless Presenter User’s Manual 2. Installation Installing the Batteries Slide off the battery cover on the back of the presenter to open it and insert the supplied batteries in the correct orientation. Slide the cover back into position. Caution: Do not mix new and used batteries in the device. Installing the Receiver Connect the receiver to a free USB port on your computer. Windows XP/2000/ME Upon detection, Windows will automatically install the appropriate drive
Summary of the content on the page No. 7
NBW-100U 2.4GHz Wireless Presenter User’s Manual 2. Select Search for the best driver for you device (Recommended) and click Next. 3. Select only Specify a location and click Browse to specify the location of C:\Windows. Then click Next. 4. When Windows finds the driver, click Next. - 5 -
Summary of the content on the page No. 8
NBW-100U 2.4GHz Wireless Presenter User’s Manual 5. If the screen below appears, click OK. Insert your Windows 98 SE CD-ROM and then click Browse to specify the directory to the Windows 98 SE CD. Click OK. 6. Click Finish to complete the installation. Windows will detect another USB Human Interface device. Repeat the steps above to finish the installation. - 6 -
Summary of the content on the page No. 9
NBW-100U 2.4GHz Wireless Presenter User’s Manual Verify the Device Installation To verify your receiver installation, select Control Panel > System > (Hardware) > Device Manager. Your device list should be similar to the screen shot displayed blow. If there is a question or exclamation mark next to any of the items, then the driver is not properly installed. Please delete the item and repeat the installation steps. - 7 -
Summary of the content on the page No. 10
NBW-100U 2.4GHz Wireless Presenter User’s Manual 3. Using the Presenter Using the Keys The mouse emulation keys (i.e., right, left and navigation keys) and Laser key function in the same way in both modes. The remaining keys offer different function according to the current operation mode. See the table below for details: Key PowerPoint Mode Windows Media Player Mode Cursor Control Controls cursor movement. Click center for mouse left button. Press and hold: Shoots the laser light.
Summary of the content on the page No. 11
NBW-100U 2.4GHz Wireless Presenter User’s Manual Activate / De-Activate Laser Point Function The laser pointer function is de-activated by default. To activate this function, press and hold the Laser key & Mode key simultaneously for about 3 seconds until the LED flashes red to confirm activation. To de-activate the laser point, just repeat these steps. + = Activate / De-activate Laser Point Function When laser point is activated, you can press and hold the Laser Light key to sh
Summary of the content on the page No. 12
NBW-100U 2.4GHz Wireless Presenter User’s Manual Sleeping Mode When the presenter is not operated for more than 10 minutes, the presenter goes into sleeping mode and de-activates the laser pointer function in order to save battery life. To wake up the presenter, just press any key on the device. To use the laser light function, you need to activate it again by following the steps above. Changing Mode The presenter has two operation modes: PowerPoint mode and Windows Media Player mod
Summary of the content on the page No. 13
NBW-100U 2.4GHz Wireless Presenter User’s Manual 4. Troubleshooting Q1. Why does my presenter doesn’t work? A1. Check that the receiver is firmly attached to the USB port on your computer and Windows built-in drivers are properly installed. Make sure you have established a communication link between the presenter and its receiver. Refer to “Using the Keys” section for instructions. Q2. I have re-established the link between the presenter and its receiver. But some of the keys still
Summary of the content on the page No. 14
NBW-100U 2.4GHz Wireless Presenter User’s Manual Q5. While in the multimedia mode, can I use the presenter to control playback software other than Windows Media Player? A5. The presenter in media mode might work with playback software from other vendors; however, we do not guarantee the compatibility with software other than Windows Media Player. 5. Warranty / Contact Warranty The NBW-100U Wireless Presenter comes with a 1 year limited warranty (90 day parts). If your unit
Summary of the content on the page No. 15
NBW-100U 2.4GHz Wireless Presenter User’s Manual 6. Specifications Items Description 2.4GHz frequency ISM band for RF Frequency worldwide Power Source AAA battery X 2 Presenter 3V 1.2mA Power Consumption 3V 27mA while Laser Pointer is on Laser wavelength at peak 650nm+-20nm (Red Light) emission Laser Pointer Indicator Max to 15 meters Power consumption 1mW Interface USB 1.1 Receiver Power consumption 5V 30mA Operation Distance 15 meters, from presenter to receiver * Speci
Summary of the content on the page No. 16
NBW-100U 2.4GHz Wireless Presenter User’s Manual 7. Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation. CE This equipment is in compliance with the requirements of the following regulations: EN 5
