Summary of the content on the page No. 1
VersiVision
FVT1000/FVR1000 Series
Fiber Optic Video Modems
Technical Manual
Also covers FVR1000M modules
Copyright Aug 2005
VERSITRON, Inc.
83 Albe Drive / Suite C
Newark, DE 19702
www.versitron.com
Summary of the content on the page No. 2
PROPRIETARY DATA All data in this manual is proprietary and may not be disclosed, used or duplicated, for procurement or manufacturing purposes, without prior written permission by VERSITRON, Inc. WARRANTY All VERSITRON products are warranted against defects in materials and workmanship for one year from date of delivery. We will repair or, at our option, replace parts, which during normal usage prove to be defective durin
Summary of the content on the page No. 3
TABLE OF CONTENTS SECTION 1: GENERAL DESCRIPTION INTRODUCTION…………………………………………………………………..4 DESCRIPTION OF EQUIPMENT…………………………………………………4 Functional Characteristics…………………………………………4 Physical Characteristics...................................................................5 SPECIFICATIONS………………………………………………………………5-6 SECTION 2: INSTALLATION INSTRUCTIONS INSTALLATION PROCEDURE………………………………………………….7 SECTION 3: T
Summary of the content on the page No. 4
SECTION 1 DESCRIPTION OF EQUIPMENT INTRODUCTION This manual provides information on the installation and operation of the VersiVision FVT1000/FVR1000 Series Fiber Optic Video Modems. Section 1 contains a general description of the equipment. Section 2 contains installation instructions. Section 3 contains maintenance and troubleshooting information. Model Description Number FVT1003 Transmitter; 1-channel simplex video; Multimode; ST; 3km standalone FVT1004 Transmitter; 1-chan
Summary of the content on the page No. 5
Physical Characteristics The VersiVision FVT1000 transmitter and FVR1000 receiver modems are available as standalone devices for easy plug and play installation. In addition, the FVR1000 receiver modems can be ordered as circuit card modules (See Chart Above) for installation in the Model FVC14 rack-mount chassis. The 14-slot chassis fits in a standard 19” rack and is offered with either 110VAC or 220VAC power supplies. The dimensions of the FVT1000 and FVR1000 standalone devices are
Summary of the content on the page No. 6
ENVIRONMENTAL MTBF >100,000 hours Operating Temp: -30˚C to +50˚C Storage Temp: -40˚C to +85˚C Relative Humidity: 0% to 95% (non condensing) Size: 19 x 16 x 3.2 cm 7.5 x 6.3 x 1.2 in. Shipping Weight: <4.4kg Construction: Aluminum Finish: Black Paint INDICATOR Module Green Video Sync Present Red Power On OPTICAL POWER BUDGET Fiber Wavelength Transmitter Receiver Optical Max Distance Power Model (s) Output Model Sensitivity
Summary of the content on the page No. 7
SECTION 2 INSTALLATION INSTRUCTIONS INSTALLATION PROCEDURE The VersiVision FVT1000 Series transmitters and receivers are preset for immediate use. There are indicator LEDs on the units for monitoring the real-time status of video, and power. The following instructions describe the typical installation procedure and the function of the LED indicators located on each unit. 1. Connect the video source (camera) to the video input BNC connector on the FVT1000 transmitter unit using coa
Summary of the content on the page No. 8
SECTION 3 TROUBLESHOOTING OPTICAL FIBER The VersiVision FVT1000 and FVR1000 Series fiber optic video modems are available for applications using multimode or singlemode optical fibers. Please be certain that the correct size and type of fiber is being used for the particular mode transmitter/receiver combination. Also be certain that the attenuation and bandwidth of the fiber optic cable being used is within the range of the system’s loss budget specifications. GENERAL A
Summary of the content on the page No. 9
FIGURE 3: VersiVision FVT100x/FVR100x Connection Layout 9
