Summary of the content on the page No. 1
®
MultiModem ZPX
V.92 Internal Modem
MT9234ZPX-UPCI
MT9234ZPX-UPCI-NV
MT9234ZPX-PCIE
MT9234ZPX-PCIE-NV
Quick Start Guide
Summary of the content on the page No. 2
MultiModem ZPX Quick Start Guide V.92 Internal Modem MT9234ZPX-UPCI, MT9234ZPX-UPCI-NV MT9234ZPX-PCIE, MT9234ZPX-PCIE-NV 82100130L Rev. A Copyright This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. All rights reserved. Copyright © 2007 Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and specifically disclaims any implied warr
Summary of the content on the page No. 3
MultiModem Quick Start Guide Introduction This guide shows you how to set up your MultiModem ZPX. For detailed information, product specifications, troubleshooting tips, and more, see the User Guide, available on your MultiModem CD. Check Multi-Tech’s Web site for current versions of our product documentation. Safety Warnings • Use this product only with UL- and CUL-listed computers. • To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or larger telephone wiring. • Never i
Summary of the content on the page No. 4
MultiModem Quick Start Guide 2. Remove the cover from your system as instructed in the system manual. 3. If you are installing a MT9234ZPX-PCIE board in a low profile machine, you will have to change the mounting bracket to the low profile mounting bracket. Refer to your User Guide for low profile mounting bracket details. 4. Select an empty PCI expansion slot. Remove the expansion slot cover and save the retaining screw. 5. Before handling the MultiModem, discharge static in your body by
Summary of the content on the page No. 5
MultiModem Quick Start Guide Line Connection Plug one end of the provided telephone cable into the modem’s LINE jack, and the other end into a telephone wall jack. This is the only required connection. Important: The LINE jack is not interchangeable with the PHONE jack. Do not plug the phone into the LINE jack or the line cable into the PHONE jack. Note: The Federal Communications Commission (FCC) and Industry Canada impose certain restrictions on equipment connected to public telephon
Summary of the content on the page No. 6
MultiModem Quick Start Guide Click on Locate and install driver software (recommended). Windows will guide you through the process of installing driver software for your device. 4. The next screen prompts you to insert the disc that came with your PCI Serial Port. If you have the disc that came with your device, insert it now. Windows will automatically search the disc for driver software. Click Next. 5. Windows couldn’t find driver software for your device screen appears. Choose B
Summary of the content on the page No. 7
MultiModem Quick Start Guide 6. At the Browse for driver software on your computer screen, click the Browse button. 7. Select the Drivers folder, and then the Vista folder on the product CD. Click Next. 8. Searching D:\Drivers\Vista for software… screen appears. 9. When the software for this device has been successfully installed screen appears with Windows has finished installing the driver software for this device: Multi-Tech’s 1-Port PCI Analog Modem Card. Click Close. Multi-T
Summary of the content on the page No. 8
MultiModem Quick Start Guide Installation of the Communications Port 10. The Found New Hardware – Multifunction Device screen appears with Insert the disc that came with your Multifunction Device. The MT9234ZPX-PCI product CD is still in the CDROM drive. Click Next. 11. At the Windows couldn’t find driver software for your device, click on Browse my computer for driver software (advanced). Locate and install driver software manually. 12. At the Browse for driver software on your comput
Summary of the content on the page No. 9
MultiModem Quick Start Guide Select Install this driver software anyway. 16. Installing driver software progress screen appears. 17. The software for this device has ben successfully installed screen appears with Windows has finished installing the driver software for this device: Multi-Tech Communications Port. Click Close. Installation of the Modem 18. The Found New Hardware – MultiTech Systems MT9234ZPX-PCIE screen appears with Insert the disc that came with your MultiTech System
Summary of the content on the page No. 10
MultiModem Quick Start Guide 19. At the Windows couldn’t find driver software for your device, click on Browse my computer for driver software (advanced). Locate and install driver software manually. 20. At the Browse for driver software on your computer screen, click the Browse button and select the Drivers folder, then the Vista folder on the product CD. 21. Click Next. 22. Windows can’t verify the publisher of this driver software screen appears. Select Install this driver softwa
Summary of the content on the page No. 11
MultiModem Quick Start Guide Windows 2000 and XP Operating Systems The MT9234ZPX driver installation is done in three parts, each directed by an installation wizard. The three parts are: (1) installation of the Single-port UART PCI Card, (2) installation of the Communications Port, and (3) installation of the modem. Preliminaries 1. Power up your computer. 2. Windows will detect that the new modem is present. Installation of the Single-Port UART PCI Card The wizard will install the f
Summary of the content on the page No. 12
MultiModem Quick Start Guide Note: This Microsoft operating system searches for a digital signature when you install any new hardware. If a “has not passed Windows logo testing” screen (or Digital Signature Not Found screen) appears, simply click Continue Anyway (or YES) to continue installation. Although Multi- Tech submits all eligible products to Microsoft for certification, the turn- around time is subject to many factors. Not having a digital signature does not affect product performa
Summary of the content on the page No. 13
MultiModem Quick Start Guide Installation of the Modem The wizard will install the file for Multi-Tech Systems MT9234ZPX Models. 12. The Welcome to the Found New Hardware Wizard screen appears for a third time. This wizard helps you install the software for: Multi-Tech Systems MT9234ZPX-UPCI. Select Install from a list or specific location (Advanced). Click Next. 13. At the Please Choose Your Search and Installation Options screen, select Search for the best driver in these locations
Summary of the content on the page No. 14
MultiModem Quick Start Guide Using Global Wizard to Configure Your Modem The Global Wizard configuration utility is recommended for computers running Windows 2000 or newer. 1. Insert the MultiModem system CD into the CD-ROM drive. 2. When the splash screen appears, click Initial Setup & Country Sel button. 3. Choose either: • Run Global Wizard from CD. This will not load the wizard onto your hard drive, or • Install Global Wizard on the HD. This will install the wizard onto your
Summary of the content on the page No. 15
MultiModem Quick Start Guide Multi-Tech Systems, Inc. 15
Summary of the content on the page No. 16
82100130L
