Summary of the content on the page No. 1
Cisco MCS 7890-C1 Business Edition 3000
Appliance User Guide
Published: November 4, 2011
This document contains brief, concise instructions that tell you how to install the MCS 7890-C1 quickly.
This document includes the following topics:
• Before You Begin, page 1
� Unpacking the MCS 7890-C1, page 2
� Mounting the MCS 7890-C1, page 4
� Connecting the MCS 7890-C1, page 6
� Starting the MCS 7890-C1, page 9
Before You Begin
The Cisco MCS 7890-C1 is an easy-to-manage, purpose-built appliance that
Summary of the content on the page No. 2
Unpacking the MCS 7890-C1 In addition to the items that are listed in the Unpacking the MCS 7890-C1 section, you need to have the following things to install the MCS 7890-C1: � Phillips screwdriver � 19-inch rack (for rack-mounting) � Wall (for wall-mounting) � Scratch awl or other sharp pointed object (for wall-mounting) � Electric drill with a 0.3-inch-diameter (7.5-mm-diameter) drill bit (for wall-mounting) Warning Installation of the equipment must comply with local and national electri
Summary of the content on the page No. 3
T1/E1 1 T1/E1 0 POWER SYSTEM CONNECTION ALARM CONNECTION ALARM Unpacking the MCS 7890-C1 Figure 1 MCS 7890-C1 Equipment 1 3 2 4 5 6 7 8 9 10 11 12 Table 2 lists the items in the MCS 7890-C1 rack-mounting kit. Table 2 Rack-Mounting Kit Contents Description Quantity Rack mount brackets (see item no. 4 in Figure 1)2 Screw: M4, L8, Phillips head (see item no. 5 in Figure 1)4 Screw kit Cage nut (see item no. 8 in Figure 1)4 Screw (see item no. 6 in Figure 1)4 Plastic washer (see item no. 7 in Fig
Summary of the content on the page No. 4
T1/E1 1 T1/E1 2 Mounting the MCS 7890-C1 Table 3 Wall-Mounting Kit Contents (continued) Description Quantity Drywall plastic anchor (see item no. 12 in Figure 1 on page 3)4 Wall-mounting template 1 1 CABLE SIDE ENTRY 2 THIS SIDE AWAY FROM MOUNTING SURFACE Mounting the MCS 7890-C1 This section includes the following MCS 7890-C1 topics: � Rack-Mounting � Wall-Mounting, page 6 Rack-Mounting Perform the following procedure to mount the MCS 7890-C1 in a 19-inch rack. You use items from the rack
Summary of the content on the page No. 5
T1/E1 1 T1/E1 0 POWER SYSTEM CONNECTION ALARM CONNECTION ALARM T1/E1 0 CONNECTION ALARM Mounting the MCS 7890-C1 Step 2 On the brackets you attached in Step 1, choose which pairs of holes you want to use. As Figure 3 shows, you can choose either top holes (Type 1) or bottom holes (Type 2). Use Type 1 holes if you want to align the MCS 7890-C1 under the bottom of other equipment in the rack. Use Type 2 holes if you want to align the MCS 7890-C1 over the top of other equipment in the rack.
Summary of the content on the page No. 6
Connecting the MCS 7890-C1 Wall-Mounting Perform the following procedure to mount the MCS 7890-C1. You use items from the wall-mounting kit described in Table 3 on page 3. Procedure Step 1 Take the wall-mounting template and temporarily attach it to the wall on which you want to mount the MCS 7890-C1. Attach the template to the wall so that the image of the MCS 7890-C1 appears in the exact place where you want to mount the MCS 7890-C1. Step 2 Locate the four dark circles on the wall-mount
Summary of the content on the page No. 7
T1/E1 1 T1/E1 2 Connecting the MCS 7890-C1 Figure 5 MCS 7890-C1 Back Panel 5 7 10 1 2 3 4 6 8 9 11 Table 4 MCS 7890-C1 Back Panel # Description 1 T1/E1 interface 2 T1/E1 interface 3 Audio line-in interface 4 USB (use for keyboard, mouse and USB dongle) 5 RJ45 interface 6 USB (use for keyboard, mouse and USB dongle) 7 DB-9 console/auxiliary interface or console port 8 VGA interface 9 Fan with grill 10 Back panel power switch (there is also a front panel power button) 11 AC power connector Us
Summary of the content on the page No. 8
T1/E1 1 T1/E1 2 T1/E1 1 T1/E1 2 T1/E1 1 T1/E1 2 Connecting the MCS 7890-C1 Figure 6 Power Cable Retainer 1 2 Screw the wire mounts onto the back wall of the MCS 7890-C1, then lace the cables into the wire mounts, as shown in Figure 7. Figure 7 Wire Mounts Finally, wrap the cables together using the cable management tie wrap (1), as shown in Figure 8. Figure 8 Cable Management Tie Wrap 1 Cisco MCS 7890-C1 Business Edition 3000 Appliance User Guide 8 OL-25101-02 255503 255497 255504 255505
Summary of the content on the page No. 9
Starting the MCS 7890-C1 Warning For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection: E1/T1 Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Warning The plug-socket combination must be accessible at all times, beca
Summary of the content on the page No. 10
Starting the MCS 7890-C1 Figure 9 MCS 7890-C1 Front Power Button Step 3 Perform the procedure described in the “How do I sign in to the interfaces?” section of the Administration Guide for Cisco Business Edition 3000. Note To shut down the MCS 7890 gracefully, press the front power button once and release immediately. If the system does not shut down using this method, press the front power button and hold for 5 seconds until the system is forced to power off. Cisco and the Cisco Logo are
