Summary of the content on the page No. 1
ZMU17MXL t English
Contents
Before using your microwave oven 4
Safety instructions 4
– Utensil safety 4
– Testing suitability of cookware 5
– Food safety 5
– Oven utensils and accessories guide 6
Technical data 6
Getting Started 7
– Unpacking 7
Installation 7
– Connecting to the mains 7
– Electrical connections 7
How to operate your microwave oven 8
– Name and function of parts 8
– Turntable Installation 8
– Control panel 9
– Microwave Cooking
Summary of the content on the page No. 2
ZMU17MXL t English 'SRKVEXYPEXMSRWSRXLITYVGLEWISJ]SYVRI[1MGVS[EZI3ZIR Thank you for having chosen a Zanussi product. We are convinced that you will find your new microwave oven very useful and that it will be of great help to you. As with all new kitchen appliances, it will take some time to learn all the new functions and features, but with time, this oven will become indispensable to you. Before using your Microwave Oven Read through the instruction manual care
Summary of the content on the page No. 3
ZMU17MXL t English Testing suitability of cookware Food safety • Place the cookware in the cavity along with a • Do not heat food in a can in the microwave oven. glass half full of water. Heat on 600 W (100%) for Always remove the food to a suitable container. one minute. If the cookware feels hot, you should • Deep fat frying should not be done in the not use it. If it is just slightly warm, you can use it microwave oven, because the fat temperature for reheating but no
Summary of the content on the page No. 4
ZMU17MXL t English Oven utensils and accessories guide A variety of Utensils and Materials may be used for cooking in your microwave oven. For your safety and to prevent damaging utensils and your oven choose, appropriate utensils and materials for each cooking method. The list below is a general guide. Material Utensils Microwave Cooking Ceramic & Glass Corning ware YES Heat resistant glass ware YES Glass ware with metal decoration NO Lead crystal glass NO China Without
Summary of the content on the page No. 5
ZMU17MXL t English GETTING STARTED Unpacking Connecting to the mains N.B. When you unpack the oven, check that the The oven is delivered with the power cord and a plug product is free from damage. Damage or any missing for 230V, 50Hz, earthed socket outlet. Earth parts must be reported immediately to the retailer. protection minimises the risks should a short-circuit The oven, parts of the oven or the accessories may occur. Check to ensure the voltage of the oven be wrap
Summary of the content on the page No. 6
ZMU17MXL t English How to operate your microwave oven 1 3 2 5 6 4 4 8 7 Name and function of parts Turntable Installation 1. Cooking compartment. Wipe the compartment 1. Place the turntable support on the cavity Bottom. clean after using the oven. 2. Place the turntable on top of the turntable support 2. Viewing window. Food can be checked while the as shown in the diagram. Make sure that turntable microwave oven is in operation. hub is securely locked in the turntable s
Summary of the content on the page No. 7
ZMU17MXL t English CONTROL PANEL 1. Timer Set for desired cooking time. Cooking will start. All clockwork timers will operate more accurately if wound past the desired time first, and then back. 2. Power Selector Adjust this knob to select the correct power level for your food. 9
Summary of the content on the page No. 8
ZMU17MXL t English MICROWAVE COOKING 1. Open the door, place the food on the turntable. When cooking for less than 2 minutes, turn the timer Close the door. for a longer period and than return to the desired 2. Set the Power Selector to the desired power time. level.(See table below.) To turn off the oven during cooking, simply turn the 3. Set the Timer to the desired time. Timer to 0. The oven begins cooking. Note: After use, be sure to return the Timer to 0, or the ove
Summary of the content on the page No. 9
ZMU17MXL t English Recommendations for Defrosting (using 200W ) Some foods such as bread and fruit, can successfully be thawed manually by using the power setting. STANDING FOOD PREPARATION (200W) TIME Bread Place on microwave-proof rack or kitchen paper. Small loaf 8–10 min. 10–15 min. Turn over halfway through defrosting time. Place on microwave-proof rack or kitchen paper. Sliced large loaf 10–13 min. 10 min Turn over halfway through defrosting time. 2 slices Place on
Summary of the content on the page No. 10
ZMU17MXL t English Microwave Hints Microwave Tips • Always keep the oven clean – avoid spill-overs • Softening Honey and do not forget to clean under the glass tray If you have a jar of honey which has and the inside of the door. crystallised, remove lid and place the jar in the oven, microwave on medium power for 2 • Preferably use round or oval casseroles with a lid minutes. when cooking in your microwave oven. • Do not use metal or metal decorated casseroles. • Meltin
Summary of the content on the page No. 11
ZMU17MXL t English Care and cleaning The oven must always be clean. Residue of food from spillovers or spatters will attract microwave energy causing it to burn on. This could reduce the efficiency of the oven and may cause bad odours. Do not attempt to tamper with or make any adjustments or repairs to any part of the oven. Repairs should only be done by a qualified service technician. Be sure the oven is disconnected from the electricity supply before cleaning. Cleaning
Summary of the content on the page No. 12
ZMU17MXL t English After-sales service and spare parts If the appliance does not work correctly, carry out the following checks first before contacting the local After-Sales Service Centre. If the oven does not start: • Check that the appliance is connected to the mains. • Check that the plug is pushed in properly. • If appropriate, replace the fuse in the plug by another of the same rating and check that the plug is wired correctly. • Check that any switch, at the wall
Summary of the content on the page No. 13
ZMU17MXL t English GUARANTEE CONDITIONS Zanussi offer the following guarantee to the first purchaser of this appliance: 1. The guarantee is valid for 24 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantee covers all parts or components which fail due to faulty workmanship or faulty material. The guarantee does n
Summary of the content on the page No. 14
ZMU17MXL t English Building In Instructions Main requirements for the cabinet under which the microwave is to be attached: • Thickness of the floor of the cabinet > 16mm. • Recommended width of cabinet: 500 - 600 mm • Depth of cabinet: min. 350 mm • When the cabinet is fully loaded (crockery plus microwave), the floor of the cabinet must not sag by more than 5 mm / m. • There must be no splits or other damage to the cabinet. • The wall mounting for the overhead cabinet m
Summary of the content on the page No. 15
ZMU17MXL t English Building In Instructions • The earthed socket must be easily accessible. Ideally it should be located underneath the cabinet to which the microwave is to be attached. The mains cable must not touch the back of the appliance. If the socket is not accessible, a device must be fitted when the appliance is installed allowing all pins of the plug to be disconnected from the mains with a contact gap of at least 3 mm. Suitable separating devices would be exce
Summary of the content on the page No. 16
ZMU17MXL t English Building In Instructions 1. Remove the contents of the cabinet and adjacent cabinets. 2. Mount the cabinet on the wall, check that it is solid and measure it. Check the location of mains sockets. 3. The holes may be bored from inside the cabinet or from the underside of the cabinet. Drilling inside the cabinet: Mark the holes inside the cabinet according to the sketch. The distance a from the edge of the carcass depends on the thickness of the front of
Summary of the content on the page No. 17
ZMU17MXL t English Building In Instructions Drilling on the underside of the cabinet Using the drilling template, choose the position of the microwave on the underside of the cabinet. (Position the front edge of the microwave door so that it is aligned with the front of the cabinet.) Secure the drilling template with the help of adhesive tape. Use a sharp pencil to transfer the markings for drilling. 4. Drill holes using a 5.5 mm drill bit. Remove drilling dust. 5. Remov
