Summary of the content on the page No. 1
CD-ES770(U) TINSEA095AWZZ
1
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
CD-ES770 Mini Component System consisting of CD-ES770 (main unit)
and CP-ES770 (speaker system).
MINI COMPONENT SYSTEM
MODEL
CD-ES770
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
AM loop antenna 1
Remote control 1 FM antenna
Summary of the content on the page No. 2
CD-ES770 SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in- terference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to ra- CAUTION: TO REDUCE THE RISK OF E
Summary of the content on the page No. 3
CD-ES770(U) TINSEA095AWZZ 2 IMPORTANT SAFETY INSTRUCTIONS CD-ES770 1 Read Instructions - All the safety and operating instructions should 10 Ventilation - Slots and openings in the cabinet are provided for venti- be read before the product is operated. lation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or cov- 2 Retain Instructions - The safety and operating instructions should be ered. The openings should ne
Summary of the content on the page No. 4
CD-ES770 IMPORTANT SAFETY INSTRUCTIONS (continued) 15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this is connected to the product, be sure the antenna or cable system is product through openings as they may touch dangerous voltage points grounded so as to provide some protection against voltage surges and or short-out parts that could result in a fire or electric shock. Never spill built-up static cha
Summary of the content on the page No. 5
CD-ES770 Contents Page General Information ® Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ENERGY STAR Program Information Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9 Preparation for Use System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12 Products that have earned ® Remote control . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
CD-ES770 Precautions General Hold the AC power plug by the head when Please ensure that the equipment is positioned in a well-ventilated removing it from the AC outlet, as pulling area and ensure that there is at least 4" (10 cm) of free space the cord can damage internal wires. along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) Do not remove the outer cover, as this 4" (10 cm) may result in electric shock. Refer inter- nal service to
Summary of the content on the page No. 7
Controls and indicators CD-ES770 1 Front panel Reference page 1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 3. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14 13 4. CD Track Up or Fast Forward, Tape 2 Fast Forward, Tuner Preset Up, Time Up Button . . . . . . . . . . . 15, 17, 22, 24 1 14 5. Clock/Timer Butt
Summary of the content on the page No. 8
CD-ES770 Controls and indicators (continued) Display 1 2 3 4 5 6 7 Reference page 8 1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. CD Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 3. CD Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5. CD Repeat Play Indicator . . . . . . . .
Summary of the content on the page No. 9
CD-ES770 1 Remote control Reference page 12 1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13 1 2. CD Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . 14, 20 13 3. CD Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16 14 5. CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 6. Tape Play B
Summary of the content on the page No. 10
CD-ES770 System connections Make sure to unplug the AC power cord before any connections. Antenna connection (see page 11) FM antenna AM loop antenna Right speaker Left speaker Speaker connection (see page 11) AC outlet (AC 120 V, 60 Hz) AC power connection (see page 12) 10 04/12/21 CD-ES770(U)1.fm TINSEA095AWZZ Preparation for Use
Summary of the content on the page No. 11
CD-ES770(U) TINSEA095AWZZ 3 CD-ES770 Antenna connection Speaker connection Supplied FM antenna: Connect the black wire to the minus (-) terminal, and the red wire to 2 Connect the FM antenna wire to the FM 75 OHMS terminal and the plus (+) terminal. position the FM antenna wire in the direction where the strongest signal can be received. Supplied AM loop antenna: Connect the AM loop antenna to the AM LOOP jack. Position the AM loop antenna for optimu
Summary of the content on the page No. 12
CD-ES770 System connections (continued) AC power connection Demonstration mode After checking all the connections have been made correctly, plug The first time the unit is plugged in, the the AC power cord of this unit into the AC outlet. If you plug in the unit unit will enter the demonstration mode. first, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand- by mode (demonstration mod
Summary of the content on the page No. 13
Remote control CD-ES770 Notes concerning use: Battery installation Replace the batteries if the operating distance is reduced or if the Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). operation becomes erratic. 2 Periodically clean the transmitter on the remote control and the Batteries are not included. sensor on the unit with a soft cloth. Exposing the sensor on the unit to strong light may interfere with 1 Open the battery cover.
Summary of the content on the page No. 14
CD-ES770 General control Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. ..... 0 30 MAXIMUM Remote control operation: Press the VOLUME (+ or -) button to increase or decrease the volume. Bass control When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "X-BASS" will appear. To cance
Summary of the content on the page No. 15
Setting the clock CD-ES770 5 Press the or button to adjust the hour and then press the MEMORY/SET button. 3 Press the or button once to advance the time by 1 hour. Hold it down to advance continuously. 6 Press the or button to adjust the minutes and then press the MEMORY/SET button. In this example, the clock is set for the 12-hour (AM 12:00) display. Press the or button once to advance the time by 1 minute. Hold it down to change the time in 5-minute intervals. 1 Press the ON/
Summary of the content on the page No. 16
CD-ES770 Listening to a CD (CDs) This system can also play audio CD-R and CD-RW discs, but cannot CD playback record. 1 Press the ON/STAND-BY button to turn the power on. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording. 2 Press the CD button. 3 Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1. 4 Place the CD on the disc tray 1, label side up. Be sure to place 3" (8 cm) CD in
Summary of the content on the page No. 17
CD-ES770 Playback will begin from track 1 on the DISC 1. After that disc Various CD functions finishes playing, the next disc will automatically play. Function Main unit Remote Operation After the last track on the fifth disc is played, the CD player stops control automatically. Play Press in the stop When there is no CD in one of the disc trays (1 - 5), the empty mode. tray will be skipped to the next tray with a CD. To exchange other CDs while playing a disc: 4 Press one of the 1 -
Summary of the content on the page No. 18
CD-ES770 Advanced CD playback To specify a disc to play Direct track search You can play a disc by specifying the disc number. By using the direct search buttons, the desired tracks on the current disc can be played. 1 Press one of the 1 - 5 buttons to select the desired disc. Use the direct search buttons on the remote control to select the desired track while playing the selected disc. Selected track number Selected disc number The direct search buttons allow you to select up to numb
Summary of the content on the page No. 19
CD-ES770 Repeat play Random play Repeat play can play all 5 discs, all tracks on a chosen disc, or a The tracks on the disc(s) can be played in random order automatically. programmed sequence continuously. To random play all tracks on up to 5 discs: To repeat all tracks on up to 5 discs: Press the RANDOM button on the remote control. Press the / button twice. 4 To repeat desired tracks: Perform steps 1 - 6 in the "Programmed play" section on page 20 and then press the / button twice.
Summary of the content on the page No. 20
CD-ES770 Advanced CD Playback (continued) Programmed play You can choose up to 32 selections for playback in the order you like. To clear the programmed selections: 1 While in the stop mode, press the Press the CLEAR/DIMMER button on the MEMORY/SET (MEMORY) button remote control while the "MEMORY" indicator to enter the programming save is flashing. mode. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode
