Shure Beta 98A user manual

Summary of the content on the page No. 1

Model Beta 98A Wired Microphones
Specification Sheet
BETA 98A Instrument Microphone
Performance Characteristics Interconnecting Cable
• Exceptional low-frequency reproduction The supplied cable connects the BETA 98A to
the preamplifier. If necessary, up to 23 m (75 ft)
• Extremely high SPL handling
of cable can be used between the microphone
• High output level
and preamplifier without signal loss.
• No crossover distortion
Shockmount Swivel Adapter
A98D Drum Mount
Use the following proce

Summary of the content on the page No. 2

Load Impedance Accessories and Parts Maximum SPL capability, output clipping level, and dynamic range vary Furnished Accessories with the input load impedance of the preamplifier to which you connect the Zippered Carrying Bag 95A2314 microphone. Shure recommends a minimum input load impedance of 1000 In-Line Preamplifier (1 piece) RPM626 Ω. Most modern microphone preamplifiers meet this requirement. Higher impedance results in better performance for these specifications. Snap-fit Windscree

Summary of the content on the page No. 3

Beta 98A +20 61 cm (2 ft.) from sound source +10 0 –10 -20 2 3 4 5 6789 2 3 4 5 6789 20 50 100 1000 10000 20000 Hz 180° 180° 150° 150° 150° 150° 120° 120° 120° 120° 90° 90° 90° 90° –20 dB –20 dB –15 dB –15 dB 60° 60° 60° 60° –10 dB –10 dB –5 dB –5 dB 30° 30° 30° 30° 0 0 250 Hz 2500 Hz 500 Hz 6300 Hz 1000 Hz 10000 Hz 11,3 mm (0.46 in.) 35,4 mm (1.4 in.) United States, Canada, Latin Europe, Middle East, Africa: Asia, Pacific: Shure Europe GmbH America, Caribbean: Shure Asia L