Audio-Technica MICROLINE AT933RX/ML user manual

Summary of the content on the page No. 1

DISTANCE “X”
LESS THAN 2 TIMES “X”
AT933Rx/ML

MicroLine
Description Output is low impedance balanced. The
output connector of the power module mates with
The AT933Rx/ML is a wide-range miniature
XLRF-type cable connectors. The balanced signal

condenser microphone with a MicroLine polar
appears across Pins 2 and 3, while the ground
pattern. It is designed for quality sound reinforce-
(shield) connection is Pin 1. Output is phased so
ment, professional recording, television, and
that positive

Summary of the content on the page No. 2

AT933Rx/ML † Polar Pattern AT933Rx/ML Specifications 0 Element Fixed-charge back plate permanently polarized condenser 30 330 Polar Pattern MicroLine Frequency Response 30-20,000 Hz 300 60 Low-frequency Roll-off 150 Hz, 6 dB/octave Open Circuit Sensitivity –36 dB (15.8 mV) re 1V at 1 Pa* Impedance 200 ohms (1000 ohms without power module) 270 90 Maximum Input Sound Level 131 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range (Typical) 105 dB, 1 kHz at Max SPL 1 Signal-to-noise Ratio 68 dB, 1 kHz at 1 Pa