Audio-Technica U853PMU user manual

Summary of the content on the page No. 1

DISTANCE “X”
LESS THAN 2 TIMES “X”
U853PMU & U853PMWU
®
® unipoint microphones
UniLine Condenser Hanging Microphones
Installation and Operation
The U853PMU requires 11V to 52V phantom power for operation.
A uniform 90° angle of acceptance provides well-balanced audio pickup. The
microphone should be located forward of the front-most source, above the
rear-most source, and “aimed” between them (Fig.1). Increasing the height of
the mic above the sources will tend to equalize sound levels betwee

Summary of the content on the page No. 2

345 U853PMU & U853PMWU Connect the TA3F-type connector from the microphone's cable to the TA3M- Specifications type connector in the power module plate. Element Fixed-charge back plate, permanently polarized condenser Note: Audio-Technica has developed a special RFI-shielding mechanism that ® Polar pattern UniLine (line cardioid) ® is an integral part of the connectors in the UniPoint line. If you remove or Frequency response 30-20,000 Hz incorrectly replace the connector, you may adversely a