Summary of the content on the page No. 1
THE SINGER'S ULTIMATE CHOICE
UHF-5805 UHF-5805
4-Channel Rechargeable Wireless Microphone System 4-Channel Rechargeable Wireless Microphone System
Features:
• 4 mic outputs
• 4 rechargeable wireless handheld mics included • 4 rechargeable wireless handheld mics included
• 2 dual microphone chargers
• Individual Volume controls for precise vocal balancing • Individual Volume controls for precise vocal balancing
• 4 independent field-replaceable Modules
• Interference-resistant UHF Band operation
Summary of the content on the page No. 2
Table of contents Safety instructions ....................................................................................................................................... 2 FCC information ............................................................................................................................................ 3 Welcome .......................................................................................................................................................... 4
Summary of the content on the page No. 3
SAFETY INSTRUCTIONS � � � � � � � � � � � � � - � The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, �� ����� sofa, rug, or similar surface that may block the ������������� ventilation slots. CAUTION: To reduce the risk of electric shock, � � � � � � � - The appliance should be situated away from heat sources such as radiators, heat registers, do not remove cover (or back). No st
Summary of the content on the page No. 4
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: �� ������ � This product, when installed as indicated in the ���������������������� ������ �������� instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by 1. To ensure the finest performance, please read this Vocopro may void your authority, granted by the FCC, to manual carefully. Keep it in a safe place for future reference. use this product. 2. Install your unit in a c
Summary of the content on the page No. 5
W e lcome ... And Thank you for purchasing the UHF-5805 from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units. All our products offer solid performance
Summary of the content on the page No. 6
Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion and, most impo
Summary of the content on the page No. 7
Specifi cations Receiver Carrier Frequency Range: UHF 614~694MHz Oscillation Mode: Quartz Controlled Fixed Frequency Stability: 10 PPM Sensitivity: 1.6uV @ sinad =12dB Max. Deviation Range: 50Hz S/N Ratio:>105dB T.H.D.: <0.5% @ 1kHz Image rejection: 85dB typical Spurious Rejection: 75dB typical Frequency Response: 40Hz~16kHz Squelch Control: dual-squelch circuit Max. Output Level: Balance: 0~400mV, Unbalance: 0~200mV Power Supply: External DC Power Supply, 0.7A, 12~15V DC Dimensions: 19”(L) x 8.
Summary of the content on the page No. 8
Microphone basics Microphone Position The UHF-5805 is ideal for close-up vocals and can be held in the hand or mounted on a mic stand. The most common applications and placement techniques are listed below. Keep in mind that microphone technique is largely a matter of personal taste, and there is no one “correct” microphone position. Proximity Effect When the sound source is less than ¼ in. from the microphone, the microphone boosts bass frequencies (by 6 to 10 dB at 100 Hz), creatin
Summary of the content on the page No. 9
Before getting started Before starting any installation procedures, it is recommend to completely unpack all the package contents. The original packaging should be kept in the event that re-shipping is needed. Upon unpacking the UHF-5805, you should have received the following items: • Custom Aluminum Travel Case (1) • UHF-5805 Receiver (1) • Handheld Microphones (4) • 3 ft. male/male ¼” cable (1) • 14V DC Main Unit power adapter (1), 9V DC Charger power adapter (2) • Dual Microphone Charger
Summary of the content on the page No. 10
Mounting To install the UHF-5805 to a 19” rack case, complete the steps below. 1. Attach mounting brackets to the UHF-5805 via the supplied mounting screws. 2. Align the UHF-5805 with the desired space in rack and slowly slide in, rear panel first. NOTE: Depending on your rack case design, it may be neces- sary to allow for sufficient space for the antennas. 3. While aligned, use rack case screws (not included) in the order shown below to stabilize the UHF-5805 in its space, using the “X” r
Summary of the content on the page No. 11
Getting Connected System Connection 1. Connect the AC POWER ADAPTER to the UHF-5805 receiver’s POWER INPUT connector, then plug the ADAPTER into a compatible AC electrical outlet. 2. Connect the UHF-5805’s receiver to a sound system, mixer or amplifier’s microphone input(s) with either one ¼” output jack for a mixed channel output, or up to four XLR output jacks for separate output for each mic. DSP ECHO �������� V.CANCEL V.PARTNER TAPE REC. VOCAL CANCEL/PARTNER TAPE REC. ��� POWER DSP SON
Summary of the content on the page No. 12
Maintenance procedures Removing the Field Replaceable Modules Each of the 4 microphone modules on the UHF-5805 were designed in a way that allows them to slide out. This is a convenient feature if ever a module needs to be repaired or replaced. 1. Remove the two screws that fasten the module to the front panel. 2. To remove the module, simply slide the module out of the compartment NOTE: It might be helpful to use a flat-head screwdriver to nudge the module out of its compartment. 3. To re-
Summary of the content on the page No. 13
Charging the Microphones The UHF-5805 comes with two dual chargers that let you charge all four microphones at the same time. Charging the Microphones If the LED light on the microphone(s) does not light up when the microphone is turned on, this indicates that the microphone needs to be charged To charge: 1. Place the microphone in the charger slot, the LED on the charger will be lit while the microphone is charging. 2. When the LED on the charger turns off, the microphone is charged and can b
Summary of the content on the page No. 14
Front and rear panel descriptions and functions 1 7 8 5 6 2 3 4 9 10 11 1. ANTE ANTE ANTEN N N NNAS NAS N NAS AS - P - Provide both RF and AF signals. 2. 2. 2. POWER (LED) POWER (LED) POWER (LED) - Indicates whether the UHF-5805 is ON or OFF. When it is lit, the power is ON. 3. 3. 3. RF (LED) RF (LED) RF (LED) - Lights when RF signals are received from the microphone chan - Lights when RF signals are received from the microphone chann nels. els. 4. 4. 4. AF (LED) AF (LED) AF (LED) - - L
Summary of the content on the page No. 15
UHF-5805 & stage monitor/p.a. loudspeakers If you will be using the UHF-5805 with stage monitors and/or P.A. system, try the following: • Place the stage monitor directly behind the microphone. • Locate the P.A. loudspeakers so that they point away from the rear of the microphone. (With the speakers located in these positions, the possibility of feedback is greatly reduced). • Always check the stage setup before a performance to ensure optimum placement of microphone and monitors. IMPORTA
Summary of the content on the page No. 16
T roubleshooting P r oblems Solutions No sound output, RF/AF LED(s) are not glowing • Make sure the microphone and receiver power switches and receiver are set to the ON position. • Check microphone charge to ensure there is sufficient power. Charge mic if necessary • Check receiver’s AC power connection. • Make sure antennas are firmly connected and extended to an optimal position. • If necessary, reduce the distance between the microphones and receiver. • Turn up the receiver’s VOLUME lev
