Summary of the content on the page No. 1
Revolabs HD ™ Single/Dual
Wireless Microphone System
Models: 02-HDSGL, 02-HDDUAL, 04-HDSGLEU and 04-HDDUALEU
User and Set-up Guide
Summary of the content on the page No. 2
© 2009 REVOLABS, INC. All rights reserved. No part of this document may be reproduced in any form or by any means without express written permission from Revolabs, Inc. Product specifications are subject to change without notice. Re v o l a b s H D ™ Si n g l e & Du a l M a n u a l 01 -HD S GL M A N -PAP-11 M a r ch 2 0 1 0 ( R e v 1 . 6 )
Summary of the content on the page No. 3
Contents Safety and General Information .................................................................................................................... 1 Introduction.................................................................................................................................................... 3 System Components ................................................................................................................................ 3 Installing the Revolabs
Summary of the content on the page No. 4
Safety and General Information Please read the following information to ensure safe and efficient use of your Revolabs system. FCC User Information FCC Registration Number: 0014898290 FCC ID: T5V02HDTRX Revolabs HD™ Dual Base Station FCC ID: T5V01HDEXEMIC Revolabs Executive HD ™ Microphone FCC Notice to Users Users are not permitted to make changes or modify the equipment in any way. Changes or modifications not expressly approved by Revolabs, Inc. could void the user’s authority to op
Summary of the content on the page No. 5
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. The use of wireless devices and their accessories may be prohibited or restricted in certai
Summary of the content on the page No. 6
Introduction Congratulations on your purchase of a Revolabs Wireless Microphone System! This system utilizes 1.9 GHz DECT technology, and high band-width audio from multiple wireless microphones, enabling clear, reliable, un-tethered communications in recording, audio/video conferencing, speech recognition, VOIP communications, sound re-enforcement as well as many other environments requiring clear audio capture. The Revolabs HD ™ Single and Dual Channel Wireless Microphone Systems
Summary of the content on the page No. 7
Acoustic echo cancellation (AEC) Feedback elimination Level control Equalization Noise cancellation The system is designed to optimize audio capture/reproduction by providing: Consistent audio input from all participants Minimum room noise Mute control Wireless encryption Automatic channel selection Full duplex audio The Charger Base charges the HD Wireless Microphones and stores them when not in use. Installing the Revolabs HD ™ Base Station The Revolabs HD
Summary of the content on the page No. 8
To Install the Base Station: 1. Plug the power cord into an appropriate outlet 2. Connect the necessary outputs and inputs Revolabs HD™ Base Station Audio Connections There are (2) 3.5mm balanced inputs and (2) 3.5mm balanced outputs on the back panel of the unit providing access to each channel’s audio signal. The three terminals correspond to: Tip = Positive + Ring = Negative – Sleeve = Shielded Ground There are one or two output channels representing a separate channel for ea
Summary of the content on the page No. 9
Using the Rear Panel Configuration DIP Switches off on 1 2 3 4 5 6 7 8 DIP Feature Off (Default) On Switch Individual 1 Output Mixing Mixed Output Outputs 2 Low Pass Filter No LPF LPF Audio Output 3 Line Level Mic Level Level Individual 4 Mute Mode No Mutes Mutes High Bass Flat Dynamic boost Boost 5 Off On Off On Microphone EQ 6 Off Off On On 65' 50' 30' 15' 7 Off On Off On Transmit Power 8 Off Off On On Configuration Settings D
Summary of the content on the page No. 10
DIP Switch 5&6 – Microphone EQ: There are four EQ options for the microphone outputs of the Base Station. One of these options can be activated for both microphones. DIP Switch 7&8 - Transmit Power: The transmit power of the Base Station can be adjusted to help reduce the operational radius of a TM Revolabs HD System in order to prevent interference from other Revolabs products, or from other devices operating in the same frequency. Note: It is recommended that the lowest functionin
Summary of the content on the page No. 11
Revolabs HD Wearable Microphones turn on and mute automatically when removed from Charger Base, to reduce noise while being attached. To use the HD Wearable Microphone: 1. Remove the microphone from the Charger Base. 2. Attach the microphone to clothing or to a lanyard, position microphone just above the sternum or breastbone, within 6 - 12 inches (15 – 30cm) from the mouth is recommended. Make sure microphone is attached securely with the microphone LED indicator pointed up toward mo
Summary of the content on the page No. 12
Using the HD Omni-Directional Tabletop Wireless Boundary Microphones The HD Omni-directional Tabletop Wireless Boundary Microphones enable multiple conference attendees to use a single microphone. 360 º pickup 1 pattern 2 3 6 5 4 1. LED display — visual status for mute, un-mute, and pairing. 2. Mute button — press to mute, un-mute and pair microphone. 3. Audio jack — accepts a 2.5mm plug. 4. Charging port — docks to Revolabs HD Charger Bases. 5. Rubber feet — non-slip, vib
Summary of the content on the page No. 13
If the microphones are placed too far from the Base Station (~65 feet or 20 meters) the connection will be dropped (LED flashes all colors) and the microphone will mute. After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to indicating it’s out of range. Move the microphone closer to the Base Station and the connection will automatically be re- established to its original state, and the beeping will cease. If not, the microphone will continue beepi
Summary of the content on the page No. 14
3. With the microphone in position, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED). 4. To turn microphone off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED and release button. If the microphones are placed too far from the Base Station (~65 feet or 20 meters) the connection will be dropped (LED flashes all colors) and the microphone will mute. After 15 secon
Summary of the content on the page No. 15
Note: The Adapter does not provide phantom power or bias current so it cannot be used with condenser or electret microphones. 2. With the microphone attached, un-mute the Adapter by pressing and releasing the Mute button (confirm by a flashing GREEN LED). Note: If the microphone has an on-board mute switch, this switch must also be un-muted prior to use. 3. To turn the Adapter off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 s
Summary of the content on the page No. 16
1. Audio Out port — accepts the 2.5mm plug for the earpiece. 2. Charging Port — docks to all Revolabs HD Charger Bases. 3. Mute button — press to mute, un-mute and pair microphone. 4. LED display — visual status for mute, un-mute, and pairing. 5. TA4F connector — connects to Countryman microphone cable. To use the HD Wireless Adapter for Countryman Microphone: 4. Remove the Microphone Adapter from the Charger Base. The adapter turns on and mutes automatically when removed from Charg
Summary of the content on the page No. 17
To pair an individual microphone to the Base Station: 1. Turn the microphone OFF (no LED activity). If the microphone is ON, press and hold the Mute button for 10 seconds until the LED turns solid RED then release the button to turn the unit off. (do not release the button when you hear two beeps). 2. Place the microphone unit into pairing mode by holding the Mute button down for seven seconds. The LED will turn solid RED. Release the Mute button. The microphone is now in pairing mode. 3.
Summary of the content on the page No. 18
Important: The Lithium Polymer rechargeable batteries that power the microphones are not user serviceable. Please contact Revolabs (www.revolabs.com) or your AV service provider for replacement instructions and to assure the proper disposal method is used. Warning: Never dispose of batteries in a fire because they may explode. Either a solid RED LED (charging) or solid GREEN LED (100% charged) will appear to confirm that the microphone is inserted properly in the Charger Base. The microphon
Summary of the content on the page No. 19
Revolabs HD™ Indicator LEDs The following tables show activities associated with the various states shown by the LEDs: Equipment Use Microphone LED Base Station Meaning Channel LEDs Microphone in Charger Solid RED OFF Charging in Progress Base Solid GREEN OFF Charging Complete Microphone not in OFF OFF Microphone powered OFF or Charger Base battery discharged Two RED flashes Two RED flashes Microphone paired and muted every 1.5 seconds every 1.5 seconds One GREEN flash GREEN fl
Summary of the content on the page No. 20
Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of one year. Any attempt by the user to alter the equipment, or equipment damaged by negligence, accident, or Acts of God voids this warranty. The Seller shall not be liable for any consequential damage resulting from the malfunction of this product. Should the user experience unsatisf
