Nady Systems DKW3GTB user manual

Summary of the content on the page No. 1

Owner’s Manual
DKW-3 GT
wireless VHF Instrument system

Summary of the content on the page No. 2

Contents Introduction ............................................................................................................................. 2 System Features ..................................................................................................................... 2 Operation ................................................................................................................................. 3 Specifications .........................................................

Summary of the content on the page No. 3

Operation receiver 1 1. Plug the AC/DC adapter (provided) into 3. The / ” auDIO OuTPuT JaCK (5) provides 4 the 9VDC InPuT JaCK (3) on the back of the a fixed, unbalanced MIC level audio output 1 receiver. Then plug the power supply into for connection to your mixer with the / ” 4 1 an AC outlet. Switch the POwer (1) to the to / ” cord supplied. As when making any 4 “On” position. The POwer On leD (2) will connection, make sure the mixing board’s now light and the receiver is operational. vo

Summary of the content on the page No. 4

wGT Bodypack Transmitter 1. Snap open the BaTTer Y COMPar TMen T COnTrOl (13) is provided on the top panel (7) and insert a fresh 9V BaTTer Y (8), of the WGT. Adjust the gain by turning the observing the correct polarity. Close the control with a small slot head screwdriver. compartment. The WGT is provided with It is recommended that this control be a 3.5 mm lOCKInG JaCK (9) for connecting turned to maximum gain. However, for the InsTruMenT CaBle (10). To secure the ultra high-gain instru

Summary of the content on the page No. 5

13 9 12 11 10 7 Opening Battery Compartment 8 5

Summary of the content on the page No. 6

Specifications OVerall sYsTeM PerFOrManCe Frequency response 80-14,000 Hz, +/-3dB Dynamic range 95dB Total Harmonic Distortion <0.7% rF Carrier Frequency range 170-216 MHz Frequency stability +/- 0.005%, crystal controlled Modulation FM (F3E), +/-15KHz max. Operating range 150 ft. typical—up to 300+ ft. line-of-sight wGT TransMITTer audio Inputs 3.5mm mono locking jack for connecting to instrument cable Controls Off/Standby/On switch, Input Level adjust leD Indicator Unit On (single flash), Low

Summary of the content on the page No. 7

90-Days Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser (U.S.A. only) that the unit is free from any defects in material or workmanship for a period of 90 days from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems. Please do not return your Nady product to the store

Summary of the content on the page No. 8

| 6701 Shellmound Street Emeryville, CA USA 94608 | | T 510.652.2411 F 510.652.5075 www.nady.com