Harbor Freight Tools WORKSTAND 95365 user manual

Summary of the content on the page No. 1

bicycle workstand
150 lb. capacity
Model 95365
asseMbly and operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
t o preVent serious injury, read and understand
all warnings and instructions before use.
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein

Summary of the content on the page No. 2

specifications Maximum Weight Capacity 150 Lbs. Overall Dimensions 13-5/8” L X 12-1/8” W X 23” H 14 gauge steel support bracket, steel tubing with Material black enamel finsh, thermoplastic hardware caps, rubber support bracket cover Seven Adjustment Positions 18-5/8”, 17-3/4”, 17”, 16-1/4”, 15-1/2”, 14-5/8”, (distance from the ground) 14” You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and a

Summary of the content on the page No. 3

unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken (see parts list/assembly diagram), please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. asseMbly instructions note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 6 of this manual. The Bicycle Workstand can be easily assembled by taking the following steps.

Summary of the content on the page No. 4

Bottom Support Bottom Support Assembly Brace (7) Assembly Holder (4) Nut (6) Handle Wheel (13) Washer (5) Figure 2 3. Attach the Top Support Assembly (15) to the top two holes on the Post (2). Secure in place using two Screws (3)-see Figure 3. Top Support Assembly (15) Screw (3) Figure 3 operation instructions 1. Position the Workstandin a location where it will not be an obstruction to passersby. Place it on a smooth, flat and level surface capable of supporting the Workstand and the weig

Summary of the content on the page No. 5

parts list part description Q’ty part description Q’ty 1 Cover 4 9 Leg Assembly A 2 2 Post 1 10 Leg Cover 1 3 Screw 2 11 Leg Assembly B 2 4 Bottom Support Assy Holder 1 12 Nut 2 5 Washer 6 13 Handle Wheel 1 6 Nut 3 14 Nut 1 7 Bottom Support Assy Brace 1 15 Top Support 1 Assembly please read tHe following carefully THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROvIDeD THe PARTS LIST AND ASSeM- BLY DIAgRAM IN THIS MANUAL AS A ReFeReNCe TOOL ONLY. NeITHeR THe MANUFACTUReR OR DISTRIBUTOR MAKeS ANY ReP

Summary of the content on the page No. 6

asseMbly diagraM SKU 95365 for technical questions, please call 1-800-444-3353. Page 6