Summary of the content on the page No. 1
HYDRO-15
HYDRAULIC FLEX WING
ROTARY MOWER
Rev 01-11 Part No. 00756179P
PART'S MANUAL
An Operator's Manual was shipped with the equipment in the Manual Canister.
This Operator's Manual is an integral part of the safe operation of this machine
and must be maintained with the unit at all times. READ, UNDERSTAND, and
FOLLOW the Safety and Operation Instructions contained in this manual before
operating the equipment. If the Operator's Manual is not with the equipment,
contact your dealer or Ala
Summary of the content on the page No. 2
TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recog- nizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and co
Summary of the content on the page No. 3
BOLT TORQUE Mounting procedures for mowers will require a significant amount of bolt nut and washer installation. Frame and structure mounting bolts should be installed using Red Loctite, and torqued to the dry values listed in the torque chart based on the bolt size and hardness. Other structures such as pump mounting bolts should be installed with Blue Loctite and torqued to the dry values indicated in the chart. Bolt tightness should be completed with and checked with a suitable torque wren
Summary of the content on the page No. 4
PARTS SECTION Parts Section – 1
Summary of the content on the page No. 5
PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts,
Summary of the content on the page No. 6
PART NAME INDEX AXLE ASY - CENTER SECTION................................................................................................................................................................ 5 AXLE ASY - RH & LH WING SECTION................................................................................................................................................... 6 AXLE HYD SCHEMATIC - LEVEL LIFT OPTION.............................................................................
Summary of the content on the page No. 7
PART NAME INDEX WHEEL HUB ASY - CENTER & WING AXLE....................................................................................................................................... 59 WINCH & CYL. SUPPORT STAND.......................................................................................................................................................... 60 WINCH ASY (WINCH REPLACEMENT PARTS)............................................................................................
Summary of the content on the page No. 8
AXLE ASY - CENTER SECTION ITEM PART NO. QTY. DESCRIPTION 1 00774965 1 CNTR AXLE WLD`MT (F/DUAL CNTRL RODS) 00757648 1 CNTR AXLE WLD`MT (F/SNGL CNTRL ROD) 2 00755076 2 BOLT, HEX HEAD 1"-NC X 5-1/2" GR8 3 00755305 2 BOLT, HEX HEAD 1"-8UNC X 6" GR8 00755305 3 BOLT, HEX HEAD 1"-8UNC X 6" GR8 4 00003500 2 GREASE FITTING, 1/8" STRAIGHT 5 00753803 2 BUSHING,CONNEX 1-1/4"OD X 1"ID X 3" LG 6 00752255 2 BOLT, HEX HEAD 1/2"-NF X 1" PL GR5 7 00001300 2 LOCKWASHER, 1/2" PL STD 8 00751035 2 DISC, RUBBER MOU
Summary of the content on the page No. 9
AXLE ASY - RH & LH WING SECTION ITEM PART NO. QTY. DESCRIPTION 1 00757692 1 AXLE ARM WLDMNT, RH WING 00757691 1 AXLE ARM WLDMNT, LH WING 2 00757241 1 WHEEL HUB, PRE-ASY 3 00756700 1 PIN WLDMNT, AXLE PIVOT 4 15B1600 1 WASHER, 1" SAE PL 5 20BH5012 1 PIN, SPIRAL 5/16" X 1-1/2" 6 00752670 1 GREASE FITTING 1/4"-28 BOLT THD Hydro 10 and 15 ft (08-05) Rev 01-11 ©2011 Alamo Group Inc. Parts Section -6
Summary of the content on the page No. 10
AXLE HYD SCHEMATIC - LEVEL LIFT OPTION Hydro 10 and 15 ft (08-05) Rev 01-11 ©2011 Alamo Group Inc. Parts Section -7
Summary of the content on the page No. 11
AXLE HYD SCHEMATIC - LEVEL LIFT OPTION Continued... ITEM PART NO. QTY. DESCRIPTION 1 8719B 1 CYL. ASY, 3-1/2" BORE (CNTR AXLE) 2 8720B 1 CYL. ASY, 3-1/4" BORE (RH WG AXLE) 3 7521B 1 CYL. ASY, 3" BORE (LH WG AXLE) 4 02965360 1 HOSE ASY, #6 - 6FJX - 6FJX - 202" LG 5 02981345 1 HOSE ASY, #6 - 6FJX - 6 FJX - 192" LG 02979578 1 HOSE ASY, #6 - 6FJX - 6FJX - 166" LG 6 02979579 1 HOSE ASY, #6 - 6FJX - 6FJX - 94" LG 7 02979575 1 HOSE ASY, #6 - 6FJX - 6FJX - 104" LG 8 94517 6 ADAPTER, HYD ELBOW SWIVEL 9
Summary of the content on the page No. 12
AXLE LEVEL LIFT CYL. - OPTION - P/N 8719, 8720 & 8721 (OLD STYLE) ITEM PART NO. QTY. DESCRIPTION 8719 - CYL ASY, 3.5" BORE CENTER AXLE 8720 - CYL ASY, 3.25" BORE RH WING AXLE 8721 - CYL ASY, 3" BORE LH WING AXLE 1 8772 - CAP, (USE ON CYL. P/N 8719) 8778 - CAP, (USE ON CYL. P/N 8720) 8784 - CAP, (USE ON CYL. P/N 8721) 2 4705M - PISTON NUT, (USE ON CYL. P/N 8719 & 9720) 4675M - PSTON NUT, (USE ON CYL. P/N 8721) 3 8768 - PISTON, (USE ON CYL. P/N 8719) 8775 - PISTON, (USE ON CYL. P/N 8720) 8780 -
Summary of the content on the page No. 13
AXLE LEVEL LIFT CYL. - OPTION - P/N 8719, 8720 & 8721 (OLD STYLE) Continued... ITEM PART NO. QTY. DESCRIPTION 6 8754 - CLEVIS, OUTER (USE ON ALL CYL.) 7 8773 - TIE ROD, (USE ON CYL. P/N 8719 & 8720) 8785 - TIE ROD, (USE ON CYL. P/N 8721) 8 4689 - NUT, HEX 9/16"-18NF PL (USE ON CYL. P/N 8719 & 8720) 4376 - NUT, HEX 1/2"-20NF PL (USE ON CYL. P/N 8721) 9 8774 - HEAD, (USE ON CYL. P/N 8719) 8779 - HEAD, (USE ON CYL. P/N 8720) 8786 - HEAD, (USE ON CYL. P/N 8721) 10 8764 - SEAL KIT, (USE ON CYL. P/N
Summary of the content on the page No. 14
AXLE LEVEL LIFT CYL. - OPTION - P/N 8719B, 8720B & 8721B (NEW STYLE) ITEM PART NO. QTY. DESCRIPTION 8719B - CYL ASY, 3.5" BORE CENTER AXLE 8720B - CYL ASY, 3.25" BORE RH WING AXLE 8721B - CYL ASY, 3" BORE LH WING AXLE 1 2417184 - CAP, (USE ON CYL. P/N 8719B) 02982590 - CAP, (USE ON CYL. P/N 8720B) 2417157 - CAP, (USE ON CYL. P/N 8721B) 2 5JRC16140 - PISTON NUT, (USE ON ALL CYL) 3 02982594 - PISTON, (USE ON CYL. P/N 8719B) 02982591 - PISTON, (USE ON CYL. P/N 8720B) 02982586 - PISTON, (USE ON CY
Summary of the content on the page No. 15
AXLE LEVEL LIFT CYL. - OPTION - P/N 8719B, 8720B & 8721B (NEW STYLE) Continued... ITEM PART NO. QTY. DESCRIPTION 8785 - TIE ROD, (USE ON CYL. P/N 8721B) 8 00036300 - NUT, HEX 9/16"-18NF PL (USE ON CYL. P/N 8719B & 8720B) 00001200 - NUT, HEX 1/2"-20NF PL (USE ON CYL. P/N 8721B) 9 00774728 - HEAD, (USE ON CYL. P/N 8719B) 02982589 - HEAD, (USE ON CYL. P/N 8720B) 2417158 - HEAD, (USE ON CYL. P/N 8721B) 10 02982595 - SEAL KIT, (USE ON CYL. P/N 8719B) 02982592 - SEAL KIT, (USE ON CYL. P/N 8720B) 0298
Summary of the content on the page No. 16
AXLE LIFT CYL - CENTER AXLE - (STANDARD HYD AXLE LIFT) ITEM PART NO. QTY. DESCRIPTION 00759946 - CYLINDER ASY, STANDARD CENTER AXLE HYD LIFT 1 8354 2 PIN, HYD CYLINDER 2 163016 2 COTTER PIN, 3/16" X 2" 3 00760199 1 SEAL KIT, (3 DIA HYD CYL) 4 4675M 1 PISTON NUT 5 6511324 1 BREATHER, 1/2 SQ HD CORED 6 00023100 1 BOLT, HEX HEAD 3/8"-16UNC X 1-1/2" PL GR5 7 00760661 1 PISTON, F/ 3" BORE CYL 8 00760194 1 CYLINDER TUBE 9 00760200 1 PISTON ROD (NOT AVAILABLE USE 00759946A CYL ASY) 10 00013901 1 N
Summary of the content on the page No. 17
AXLE LIFT SCREW ASY - WING AXLES ITEM PART NO. QTY. DESCRIPTION 1 0656510000 1 MANUAL LIFT SCREW ASY (STANDARD AXLE LIFT) 2 651062F 2 GREASE FITTING (DRIVE TYPE) 3 00609200 2 BOLT, HEX HEAD 1"-NC X 4 GR5 4 02030300 2 LOCKNUT, TOPLOCK 1"-NC PLB 5 00760135 1 HANDLE, MANUAL LIFT SCREW 6 00771279 1 CAP, PLASTIC Hydro 10 and 15 ft (08-05) Rev 01-11 ©2011 Alamo Group Inc. Parts Section -14
Summary of the content on the page No. 18
AXLE SPRING SHOCK ASY - LH OR RH WING (OPTIONAL) ITEM PART NO. QTY. DESCRIPTION 1 00756907 1 ROCKER ARM WELDMENT 2 1630162 1 COTTER PIN 3 00756998 1 ROCKER ARM PIN 4 371063A 1 SPRING Hydro 10 and 15 ft (08-05) Rev 01-11 ©2011 Alamo Group Inc. Parts Section -15
Summary of the content on the page No. 19
THIS PAGE INTENTIONAL LEFT BLANK Hydro 10 and 15 ft (08-05) Rev 01-11 ©2011 Alamo Group Inc. Parts Section -16
Summary of the content on the page No. 20
BASIC MOWER ASY - 15 FT (PART 1) Hydro 10 and 15 ft (08-05) Rev 01-11 ©2011 Alamo Group Inc. Parts Section -17
