Summary of the content on the page No. 1
TCD-1
TCD-2
INSTALLATION & OPERATING MANUAL
With ILLUSTRATED PARTS
NOTE: LIFT THE DISPENSER USING THE HANDLES ONLY. DO NOT LIFT THE DISPENSER FROM THE BOTTOM.
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601 FAX: (217) 529-6644
34106.0001L 11/06 © 2004 Bunn-O-Matic Corporation www.bunnomatic.com
Summary of the content on the page No. 2
BUNN-O-MATIC COMMERCIAL PRODUCT WARRANTY Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) All equipment other than as specified below: 2 years parts and 1 year labor. 2) Electronic circuit and/or control boards: parts and labor for 3 years. 3) Compressors on refrigeration equipment: 5 years parts and 1 year labor. 4) Grinding burrs on coffee grinding equipment to grind coffee to meet original factory screen sieve analysis: parts and labor for 3 years or 30,000 po
Summary of the content on the page No. 3
C O L P INTRODUCTION These dispensers are designed to mix liquid tea concentrate with water to produce iced tea by the glass or pitcher. The concentrate can be stored either inside the dispenser, or outside with a hose connection to the dispenser. The dispenser must be placed on a sturdy counter or shelf. PLUMBING REQUIREMENTS This dispenser must be connected to a cold water system with operating pressure between 30 and 90 psi (138 and 620 kPa) from a 1⁄2" or larger supply line. A shut-off
Summary of the content on the page No. 4
SET UP AND OPERATING PROCEDURES 1. Remove dispenser from the box and place on a sturdy, level counter. 2. Remove the brass cap and any packing material from the end of the water inlet fitting located on the rear of the dispenser. 3. Attach the 1/4" "L" tube and water strainer to the water inlet fitting, tighten all flare nuts. NOTE: The flow direction arrow on the strainer must point towards the dispenser. 4. Attach a 1/4" water line to the water strainer. This supply line must have at least 30
Summary of the content on the page No. 5
DISPENSER CLEANING AND SANITIZING Daily Cleaning: 1. Turn handle on rear of dispenser to shut off the water supply. 2. Open the faucet to relieve pressure in the system. 3. Since the bag connector(s) have an internal shut off valve, it will be necessary to prop the valve open during clean- ing. NOTE: Cutting off the mating connector of an empty concentrate bag works well for this. Keep this mating end for future cleanings of the system. 4. Turn on water supply to the dispenser. 5. Place the ope
Summary of the content on the page No. 6
TCD-1 REPLACEMENT PARTS (TCD-1) TCD-2 60 61 63 62 61 47 .375" BIB Adapter Concentrate Bottle Tube 23 46 27 28 29 50 51 21 49 48 10 19 18 30 31 17 32 16 33 15 20 22 14 26 35 13 36 34 24 12 23 25 11 10 23 38 58 1 39 56 55 5 37 6 57 40 7 41 8 42 9 2 43 3 45 44 4 53 51 52 54 59 P3457.60 34106.1 112106 6
Summary of the content on the page No. 7
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.0006 1 Tube Assy, Strainer to Bulkhead 6 00459.0001 1 Fitting, Bulkhead 7 01532.0000 1 Lockwasher, Internal Tooth .438" 8 00463.0000 1 Nut, .438" - 20 9 37689.0000 1 Tube Assy, Bulkhead to Shut-off 10 32891.0001 2 Elbow, Male .25" FLR x .25" MPT 11 33113.0000 1 Valv
Summary of the content on the page No. 8
TCD-1 REPLACEMENT PARTS (TCD-1) TCD-2 (continued) 60 61 63 62 61 47 .375" BIB Adapter Concentrate Bottle Tube 23 46 27 28 29 50 51 21 49 48 10 19 18 30 31 17 32 16 33 15 20 22 14 26 35 13 36 34 24 12 23 25 11 10 23 38 58 1 39 56 55 5 37 6 57 40 7 41 8 42 9 2 43 3 45 44 4 53 51 52 54 59 P3457.60 34106.1 112106 8
Summary of the content on the page No. 9
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 27 37786.0001 2 Plate, Fitting Retainer 01360.0002 2 Screw, Plascrew #6 x .375" 28 32631.0000 1 Fitting, Barb .25" 29 32849.0001 2 O-ring 30 32631.0001 1 Fitting, Barb .375" 31 37487.1000 1 Venturi Mixer (Includes item 36) 32 37691.0000 1 O-ring 33 37486.0000 1 Adjustment Screw, Venturi 34 32852.0000 1 O-ring 35 03093.0001 1 Wing Nut, Faucet 01268.0000 1 Chrome Nut, Faucet Union (Optional) 36 01221.0001 1 C-Ring, Faucet S
Summary of the content on the page No. 10
TCD-1 REPLACEMENT PARTS (TCD-1) TCD-2 (continued) 60 61 63 62 61 47 .375" BIB Adapter Concentrate Bottle Tube 23 46 27 28 29 50 51 21 49 48 10 19 18 30 31 17 32 16 33 15 20 22 14 26 35 13 36 34 24 12 23 25 11 10 23 38 58 1 39 56 55 5 37 6 57 40 7 41 8 42 9 2 43 3 45 44 4 53 51 52 59 54 P3457.60 34106.1 112106 10
Summary of the content on the page No. 11
REPLACEMENT PARTS (TCD-1) ITEM PART NO. QTY. DESCRIPTION 54 03207.0004 1 Drip Tray 55 38465.0000 1 Decal, Pressure Regulator 56 38466.0000 1 Decal, Shut-off 57 00651.0000 1 Decal, BUNN 58 00656.0000 1 Decal, Plumbing Code 59 38839.0000 1 Stand (Optional) 60 26443.0000 1 Reducer, Barb .375" x .25" 34644.0000 1 Connector, Barb .375" x .375" 61 12422.0001 2 Clamp, Hose .59"/.66" For use with .375" BIB adapter 62 37720.0000* 1 Tube, Silicone .375" ID x 3.0" (Order item 67) 38295.0000
Summary of the content on the page No. 12
TCD-1 REPLACEMENT PARTS (TCD-2) TCD-2 65 66 53 50 51 52 51 Concentrate Bottle Tube 54 .375" BIB Adapter 51 49 Bag Divider 30 59 31 63 33 24 22 10 18 19 32 20 17 26 34 35 21 16 25 36 15 23 19 37 29 38 14 39 13 12 27 11 10 41 1 42 5 40 51 28 6 43 61 62 7 58 44 60 8 9 45 2 46 3 48 4 56 47 55 57 64 63 P3462.60 34106.1 112106 12
Summary of the content on the page No. 13
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 1 23820.1000 1 Water Strainer Assy (Includes items 2 thru 4) 2 22249.0000 1 Cap, Water Strainer 3 23721.0000 1 Screen 4 23819.0000* 1 Housing (Order item 1) 5 00310.0006 1 Tube Assy, Strainer to Bulkhead 6 00459.0001 1 Fitting, Bulkhead 7 01532.0000 1 Lockwasher, Internal Tooth .438" 8 00463.0000 1 Nut, .438" - 20 9 37689.0000 1 Tube Assy, Bulkhead to Shut-off 10 32891.0001 2 Elbow, Male .25" FLR x .25" MPT 11 33113.0000 1 Valv
Summary of the content on the page No. 14
TCD-1 REPLACEMENT PARTS (TCD-2) TCD-2 (continued) 65 66 53 50 51 52 51 Concentrate Bottle Tube 54 .375" BIB Adapter 51 49 Bag Divider 30 59 31 63 33 24 22 10 18 19 32 20 17 34 26 35 21 16 36 25 15 23 19 37 29 38 14 39 13 12 27 11 10 41 1 42 5 40 51 28 6 43 61 62 7 58 44 60 8 9 45 2 46 3 48 4 56 47 55 57 64 63 P3462.60 34106.1 112106 14
Summary of the content on the page No. 15
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 30 37786.0001 2 Plate, Fitting Retainer 38044.0000 2 Screw, Plastite #6 x .375" 31 32631.0000 1 Fitting, Barb .25" 32 32631.0001 1 Fitting, Barb .375" 33 32849.0001 2 O-ring 34 37487.1000 1 Venturi Mixer (Includes item 39) 35 37691.0000 1 O-ring 36 37486.0000 1 Adjustment Screw, Venturi 37 03093.0001 2 Wing Nut, Faucet 01268.0000 2 Chrome Nut, Faucet Union (Optional) 38 32852.0000 2 O-ring 39 01221.0001 2 C-Ring, Faucet S
Summary of the content on the page No. 16
TCD-1 REPLACEMENT PARTS (TCD-2) TCD-2 (continued) 65 66 53 50 51 52 51 Concentrate Bottle Tube 54 .375" BIB Adapter 51 49 Bag Divider 30 59 31 63 33 24 22 10 18 19 32 20 17 34 26 35 21 16 25 36 15 23 19 37 29 38 14 39 13 12 27 11 10 41 1 42 5 40 51 28 6 43 61 62 7 58 44 60 8 9 45 2 46 3 48 4 56 47 55 57 64 63 P3462.60 34106.1 112106 16
Summary of the content on the page No. 17
REPLACEMENT PARTS (TCD-2) ITEM PART NO. QTY. DESCRIPTION 58 00656.0000 1 Decal, Plumbing Code 59 38130.0000 1 Decal, Faucet Under Pressure 60 38465.0000 1 Decal, Pressure Regulator 61 38466.0000 1 Decal, Shut-off 62 00651.0000 1 Decal, BUNN 63 38278.0002* 2 Edging 36.0" (Order item 74) 64 38839.0000 1 Stand 65 38745.1000 1 Bag Divider (Includes Item 66) 66 38278.0001* 1 Edging 9.5" (Order item 74) 38278.0003* 2 Edging 1.0" (Order item 74) 67 00674.0000 1 Brush, Tube .75" (Not illus
Summary of the content on the page No. 18
ICED TEA DECAL PLACEMENT APPROX. 5“ PLASTIC BODY FAUCET COMPARISON If you have a plastic body faucet of this New Plastic Faucet Design design, you must order a complete new plastic faucet. 34106.1 020306 18
