Summary of the content on the page No. 1
Owner’s Manual
for
™
Manual Reel Mower
Model LMM
(Series 35 and 40)
Summary of the content on the page No. 2
Table of Contents Illustrations ...................................................... 1 Welcome .......................................................... 3 Warranty.......................................................... 3 Use of This Product ............................................ 3 Assembly.......................................................... 4 Assemble Handle Section .............................. 4 Adjust Cutting Height ................................... 4
Summary of the content on the page No. 3
LMM Owner’s Manual Fig. A Fig. C Fig. D Fig. B Fig. E -1-
Summary of the content on the page No. 4
LMM Owner’s Manual -2-
Summary of the content on the page No. 5
LMM Owner’s Manual WELCOME Congratulations on your purchase of a Sunlawn mower. This and our other Sunlawn products originate from our commitment to conscientious gardening solutions. Please use this manual as a reference. WARRANTY Sunlawn, Inc. (the Manufacturer) guarantees this product for private use for a period of 2 years from the date of purchase. This guarantee applies to all serious defects of the product which can be proven to have been caused by faulty materials or workmanship.
Summary of the content on the page No. 6
LMM Owner’s Manual ASSEMBLY ASSEMBLE THE HANDLE SECTIONS (FIG. A) Fit the lower section of the handle so that the holes are over the handle posts on the mower. Then rock the handle to align the locking tabs and allow the handle section to fit into place. Continue assembly of the middle and top sections of the handle using the handle bolts and wing nuts. ADJUSTING THE CUTTING HEIGHT (FIG. B, C) The cutting height of the LMM may be adjusted from approximately 10 mm (.4 inches) up to appr
Summary of the content on the page No. 7
LMM Owner’s Manual NORMAL MOWING To obtain a clean cut, push the mower in straight lines (passes) at a deliberate walking pace. Overlap the passes to even the cut and to avoid any uncut strips. Mower works best in dry grass. Wet grass causes an uneven cut. MOWING USING THE GRASS CATCHER (Optional Accessory) See illustrations at beginning of manual: steps 1-8. The grass catcher collects the clippings as it mows. The grass catcher attaches at the grass catcher hooks located on either sid
Summary of the content on the page No. 8
LMM Owner’s Manual 4. Now check the adjustment using the small 0.05mm/0.002 inch gauge (silver strip) supplied with the LMM (or any 0.05mm/0.002 inch feeler gauge). If the gauge is held by the cylinder blades but the cylinder and cutting bar are not touching then the adjustment is correct. STORAGE 1. Store the LMM in a cool, dry place. 2. The mower should be stored out of the reach of children. ! WARNING Blades are sharp! Be careful of injury — handle the blades careful
Summary of the content on the page No. 9
LMM Owner’s Manual TECHNICAL DATA Mower Weight LMM-40 8.8kg (19.3 lb) LMM-35 8.1kg (17.7 lb) Cutting swath LMM 40 40 cm (16 inches) LMM 35 35 cm (14 inches) Cutting height 10 – 55 mm (.4 – 2.2 inches) Wheel diameter 22.8 cm (9 inch) Blades Precision five-blade contact-free cutting system. Flame hardened, bearing- mounted -7-
Summary of the content on the page No. 10
LMM Owner’s Manual PARTS LIST -8-
Summary of the content on the page No. 11
LMM Owner’s Manual 1. Top Cover 18. Adjustment Knob Bolt 2. Height Adjusting Tabs 19. Grass Catcher Hooks 3. Cover Screws 20. Compression Nut 4. Wheel Axle 21. Compression Bolt 5. Manual Driver Pawl 22. Reel Cylinder 6. Cowl (R&L) 23. Cutting Bar (Bed Knife) 7. Spacer 24. Cutting Bar Springs 8. Pinion Gear (R&L) 25. Cutting Bar Adjustment 9. Wheel Bolts 10. Rim 26. Lower Handle Section 11. C-clip 27. Middle Handle Section 12. Hubcap 28. Top Handle Section 13. Handle Post Bolt 29. F
Summary of the content on the page No. 12
LMM Owner’s Manual -10-
