Simplicity Manufacturing REGENT II user manual

Summary of the content on the page No. 1

50” Mulch Kit
Installation
Mfg. No. 1694958
For Regent II / 500 / 2500 / LT-200 Series Lawn Tractors
Instructions
7
4
3
6
9
8
2
1
10
Kit Contents:
Ref. Part No. Qty. Description
1 1716697 3 BLADES, Mower
5
2 1726578 1 PLATE, Mounting
3 1732349A 1 BAFFLE ASSEMBLY
4 2171600 1 STRAP, Rubber
5 1933988 8 NUT, Push, 5/16
6 1960096 1 WASHER
7 1960393 1 SCREW, Phillips, #10-24 x 1 11
8 1933896 1 NUT, Hex, Nylock, #10-24
9 1927557 10 NUT, Hex, Flange Lock, 5/16-18
12
10 1931332 10 CARRIAGE BOLT, 5/16-18

Summary of the content on the page No. 2

Installation Instructions Mulch Kit 3. Remove the capscrew (D, Figure 3), spring washer B C (C), hex washer (B), and blade (E). 4. Reinstall the new blade with the lift wings (E, Figure 3) pointing up toward the mower deck as shown. 5. Reinstall the hex washer (B, Figure 3), spring washer (C) and capscrew (D). Use a wooden block (A) to D prevent blade rotation while tightening the capscrew (D) to 45-55 ft. lbs. (61-75 N.m). Turn capscrew E clockwise to tighten. A Figure 3. Blade Installation

Summary of the content on the page No. 3

Mulch Kit Installation Instructions C F C A B C B C A. Mounting Plate B C C B. Carriage Bolts & Push Nuts C C. Nut, Flange Lock, 5/16-18 D D. Baffle, RH B E. Baffle, LH B F. Carriage Bolts, 5/16-18 x 5/8 E B B B Figure 5. Baffle Installation 7. Install RH baffle (D) and secure with carriage bolts & E push nuts (B) and nuts (C). D Note: The carriage bolt & push nuts are combined to A hold carriage bolt in place and aid in ease of installation. 8. Install mounting plate (A, Figure 5) to mower dec

Summary of the content on the page No. 4

Installation Instructions Mulch Kit NOTES MANUFACTURING, INC. Form No. 1732615-03 Rev. 4/2006 500 N Spring Street / PO Box 997 © 2006 Simplicity Manufacturing, Inc. All Rights Reserved Port Washington, WI 53074-0997 USA TP 200-4262-03-AT-SMAN 4