Summary of the content on the page No. 1
Coronet
13HP Hydro
OPERATOR’S
MANUAL
Coronet Series
11HP Gear Riders 30” Mower Decks
Mfg. No. Description Mfg. No. Description
1693030 Coronet, 11HP Gear 1692543 30” Mower Deck
1693032 Coronet, 11HP Gear (Export)
34” Mower Decks
13HP Hydro Riders
Mfg. No. Description
Mfg. No. Description 1692545 34” Mower Deck
1693034 Coronet, 13HP Hydro 1693168 34” Mower Deck (Export)
1693036 Coronet, 13HP Hydro (Export)
14HP Hydro Riders
Mfg. No. Description
1693038 Coronet, 14HP Hydro
1693040 Coronet, 14HP
Summary of the content on the page No. 2
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.
Summary of the content on the page No. 3
OPERATOR’S MANUAL 400 Series Riders Mfg. No. Description 1693042 411G, 11HP Gear 1693044 412H, 13HP Hydro 1693046 414H, 14HP Hydro Mower Decks Mfg. No. Description 1692544 30” Mower Deck 1692546 34” Mower Deck 1717740 Rev 4/97 TP-100-2064-00-CO-A
Summary of the content on the page No. 4
AGCO-Allis Lawn & Garden Equipment 500 N. Spring Street \ P.O. Box 997 Port Washington, WI 53074-0997 USA www.allislawn.com © Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.
Summary of the content on the page No. 5
OPERATOR’S MANUAL 2400 Series Riders Mfg. No. Description 1693048 2411G, 11HP Gear 1693050 2414H, 13HP Hydro Mower Decks Mfg. No. Description 1692544 30” Mower Deck 1692546 34” Mower Deck 1717741 Rev 4/97 TP-100-2064-00-CO-M
Summary of the content on the page No. 6
Massey Ferguson Lawn & Garden Equipment is Manufactured and Distributed by Simplicity Manufacturing, Inc. 500 N. Spring Street • P.O. Box 997 • Port Washington, WI 53074-0997 USA www.masseylawn.com © Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.
Summary of the content on the page No. 7
Table Of Contents RIDER & MOWER IDENTIFICATION............................2 TROUBLESHOOTING & REPAIR...............................21 General...............................................................................21 SAFETY RULES............................................................3 Troubleshooting The Rider ................................................21 Troubleshooting The Mower...............................................22 SAFETY DECALS .....................................
Summary of the content on the page No. 8
Rider & Mower Identification IDENTIFICATION NUMBERS MODEL REFERENCE Record your model number, manufacturer number and Model Number: engine idnetification number in the space provided for easy reference. The models and manufacturer numbers covered in this manual are listed on the front cover. The Manufacturer Number: rider I.D. tag is located on the left-side of the frame, in front of the rear tire, as shown below. The mower deck Engine I.D. Number: I.D. tag is also on the left side, on top of t
Summary of the content on the page No. 9
Safety Rules Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of rider, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. GENERAL OPERATION WARNING - SLOPE OPERATION Never operate on slopes greater than 30 percent • Read, unde
Summary of the content on the page No. 10
Safety Rules running. Allow engine to cool before refueling. Do CHILDREN not smoke. Tragic accidents can occur if the operator is not alert to c) Never refuel the unit indoors. the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that chil- • Never run a unit inside a closed area. dren will remain where you last saw them. • Keep nuts and bolts, especially blade attachment • Keep children out of the mowing area and under the bolts, tight and kee
Summary of the content on the page No. 11
Safety Decals This unit has been designed and manufactured to pro- your rider and mower should be carefully read and vide you with the safety and reliability you would expect obeyed. Personal bodily injury can result when these from an industry leader in outdoor power equipment instructions are not followed. The information is for your manufacturing. safety and it is important! The safety decals shown below are on your rider and mower. Although reading this manual and the safety instructions i
Summary of the content on the page No. 12
Features & Controls RIDER FEATURES & CONTROLS Figure 2. Rider Features REF NAME FUNCTION A Mower Lift Lever Raises mower into transport position. B Fuel Tank 2 gal. (7.6L) see-through tank for fuel level reading. C Ignition Switch Starts and stops the engine. TM D Auto-Levelling Rod Allows mower hitch (E) to raise and lower around very tight corners while mower remains level. E Mower Hitch Quick-hitch system allows easy removal and installation of mower and attachments F Mower Deflector Defle
Summary of the content on the page No. 13
Features & Controls ENGINE COMPARTMENT *2387 Figure 3. Engine Compartment REF NAME FUNCTION A Fuel Tank 2 gal. (7.6L) see-through tank for fuel level reading. B Ignition Switch Starts and stops the engine. C Battery 12 volt, 340 amp battery recharged by engine alternator D Throttle/Choke Cable Controls engine speed and choke position. See engine manual for adjustment. E PTO Switch (Electric Clutch) Controls electric clutch for attachments. Pull out to engage clutch; push in to disen- gage. F Air
Summary of the content on the page No. 14
Features & Controls Test 1 - Engine should NOT crank if: SAFETY INTERLOCK SYSTEM A. seat is not occupied or Your rider is equipped with a seat switch safety system that will automatically shut the engine off when the oper- B. transmission lever out of neutral or ator leaves the seat with the ground speed control lever C. PTO switch engaged or in gear or PTO engaged. Once the engine has stopped, D. clutch/brake pedal not fully depressed. the electric PTO switch must be turned off after operator r
Summary of the content on the page No. 15
Operation GENERAL WARNING Never allow passengers to ride on the unit. Before operating this rider for the first time, the owner should operate in an open area without mowing, to become accustomed to the unit. The left side of the WARNING mower can be used to trim close to objects. Be sure to read all information in the Safety and Operation sections Towing the rider will cause transmission dam- before attempting to operate this rider and mower. age. Do not use another vehicle to push or pull ride
Summary of the content on the page No. 16
Operation *2390 Figure 6. Mower Hitch A. Lever C. Rider Hitch Brackets B. Mower Hitch 2. On left-hand side of 34” mower, push idler pulley arm (A, figure 5) to relieve belt tension. On right-hand side of 30” mower, pull idler pulley arm to relieve belt tension. 3. With belt tension relieved, remove belt from idler pul- ley (B, figure 5) and PTO pulley (C). Removing belt relieves tension on the front hitch assembly. TM 4. With lift lever down and Dial-A-Cut control set to the lowest setting, rem
Summary of the content on the page No. 17
Operation WARNING Gasoline is highly flammable and must be han- dled with care. Never fill the tank when the engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills. CLUTCH/BRAKE PEDAL OPERATION - HYDRO MODELS 1. See figure 10. Depressing the pedal from position A to B disengages the transmission drive and also returns the transmission control lever to neutral (from forward speeds). Fully depressing the pedal
Summary of the content on the page No. 18
Operation 3. Use the PTO switch (G, figure 2) to disengage the WARNING PTO. Make sure desired direction of travel is clear of 4. Set the engine speed control lever (M, figure 2) to 1/2 objects, people and animals. throttle setting and allow the engine to idle for 20 sec- onds. Stopping a hot engine too fast may cause 1. If you are ready to mow, lower the mower from the engine damage. transport position using lever (A, figure 11) and set TM 5. Turn key (C, figure 2) to OFF and remove it. the mow
Summary of the content on the page No. 19
Mowing Patterns & Tips • For dry conditions where grass blow-out is a problem: GENERAL a. Use sharp blades. For the first use of the mower, choose a smooth level b. Raise deck so the front is even with, or 1/8” lower area. Cut long straight strips overlapping slightly. than, rear. The size and type of area to be mowed determines the best mowing pattern to use. Obstructions such as trees, c. Use 3/4 engine speed. fences and buildings must also be considered. Where d. Clean deck of built-up materi
Summary of the content on the page No. 20
Mowing Patterns & Tips • If mulching baffles are removed, the original deflector The Best Combination must be in operating position for safe side-discharge We recommend that you experiment with the height of mowing. cut position and rider ground speed that will give you the best cut. Start with a higher cutting height and try How Much Grass To Cut Off increasing lower settings until you find a cutting height Removing too much grass height in one cutting may that is matched to your mowing condit
