Summary of the content on the page No. 12
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 MAINTENANCE (Continued) MAINTENANCE (Continued) Drive Belt Replacement (Continued) GENERAL CLEANING • Only if the mower is fitted with a full disc and blades will it be necessary to remove the cutting assembly by undoing the centre bolt and three surrounding bolts with suitable spanners. • If the mower is fitted with the “Inline Swing Back Blade” option, rotate both blades backward until the flute on the blade • Refer to
Summary of the content on the page No. 13
PLATE 7 - backs plate 8 ™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 POWERSTART OPTION MAINTENANCE (Continued) Lubricating the Drive Pawls Problem Possible Causes Corrective Action • Support the rear wheels off the ground. Engine cranks slowly • Bad electrical connections • Reconnect connections securely • Remove the rear hubcaps and wheel plugs (refer figure 30). • Replace faulty electrical cables • Inspect the inside of the wheel hub through the wheel plug hole.
Summary of the content on the page No. 14
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 MAINTENANCE (Continued) TROUBLESHOOTING GENERAL Before After While Every Every Components Action Mowing Mowing Mowing 5 hours 25 hours Special Considerations • Never attempt any corrective action that is not outlined in this or associated manuals. Refer to your nearest authorised Rover dealer. Overall mower Clean the upper and underside • • Always replace components with genuine Rover replacement parts. WARNING Engine
Summary of the content on the page No. 15
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 MAINTENANCE (Continued) TROUBLESHOOTING GENERAL Before After While Every Every Components Action Mowing Mowing Mowing 5 hours 25 hours Special Considerations • Never attempt any corrective action that is not outlined in this or associated manuals. Refer to your nearest authorised Rover dealer. Overall mower Clean the upper and underside • • Always replace components with genuine Rover replacement parts. WARNING Engine
Summary of the content on the page No. 16
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 POWERSTART OPTION MAINTENANCE (Continued) Lubricating the Drive Pawls Problem Possible Causes Corrective Action • Support the rear wheels off the ground. Engine cranks slowly • Bad electrical connections • Reconnect connections securely • Remove the rear hubcaps and wheel plugs (refer figure 30). • Replace faulty electrical cables • Inspect the inside of the wheel hub through the wheel plug hole. If dirt is found, the w
Summary of the content on the page No. 17
PLATE 9 - backs plate 10 ™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 VORWORT VORBEREITUNGEN ABNEHMEN DER VERPACKUNGSBÄNDER VON DEN STEUERGRIFFEN Herzlichen Glückwunsch zum Kauf eines hochwertigen Produkts - entworfen und gebaut in Australien von einem australischen Unternehmen. Wie schon auf der Titelseite angegeben, wird in diesem Handbuch der Betrieb des Rover-Motorrasenmähers mit Fahrantrieb beschrieben. Vor der Inbetriebnahme des Mähers unbedingt die Verpackungs
Summary of the content on the page No. 18
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 KOMPONENTEN SICHERHEITSHINWEISE •Vergewissern Sie sich bitte, dass alle der folgenden Komponententeile in der Verpackung enthalten sind (siehe Abbildung 1): - Mäher (1 Stück) ANLEITUNG - Satz bestehend aus: Bedienungshandbuch (1 Stück) • Lesen Sie die Anleitung bitte sehr sorgfältig durch. Machen Sie sich mit der Steuerung und der korrekten Verwendung des Motorhandbuch (1 Stück) Geräts vertraut. Zündkerzenschlüssel (1
Summary of the content on the page No. 19
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 KOMPONENTEN SICHERHEITSHINWEISE •Vergewissern Sie sich bitte, dass alle der folgenden Komponententeile in der Verpackung enthalten sind (siehe Abbildung 1): - Mäher (1 Stück) ANLEITUNG - Satz bestehend aus: Bedienungshandbuch (1 Stück) • Lesen Sie die Anleitung bitte sehr sorgfältig durch. Machen Sie sich mit der Steuerung und der korrekten Verwendung des Motorhandbuch (1 Stück) Geräts vertraut. Zündkerzenschlüssel (1
Summary of the content on the page No. 20
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 VORWORT VORBEREITUNGEN ABNEHMEN DER VERPACKUNGSBÄNDER VON DEN STEUERGRIFFEN Herzlichen Glückwunsch zum Kauf eines hochwertigen Produkts - entworfen und gebaut in Australien von einem australischen Unternehmen. Wie schon auf der Titelseite angegeben, wird in diesem Handbuch der Betrieb des Rover-Motorrasenmähers mit Fahrantrieb beschrieben. Vor der Inbetriebnahme des Mähers unbedingt die Verpackungsbänder abnehmen, mit dene
Summary of the content on the page No. 1
PLATE 1 - backs plate 2
™
Rover Mowers Ltd
GB
OWNERS MANUAL - Powered Lawnmowers - Walk Behind
ABN 11 000 257 303
Model Nos. 51, 61 & 80
SAFETY INSTRUCTIONS
D GEBRAUCHSANWEISUNG - Motor-Rasenmäher -
Modell Nr. 51, 61 & 80
TRAINING
• Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.
F
MANUEL DU PROPRIETAIRE - Tondeuse à Gazon à Essence -
• Never allow children or people unfamiliar with these instructions to use the mower. Local regulation
Summary of the content on the page No. 2
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 • Symbols are used on the machine to communicate important information. • Los símbolos de la máquina brindan información muy importante. GB SP PREFACE • A list of symbols and their meanings are shown below. • La lista de símbolos y significados están indicados abajo. • Please familiarise yourself with them before operating the machine. • Familiarícese con los símbolos antes de poner en marcha la máquina. Congratulations on
Summary of the content on the page No. 3
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 • Symbols are used on the machine to communicate important information. • Los símbolos de la máquina brindan información muy importante. GB SP PREFACE • A list of symbols and their meanings are shown below. • La lista de símbolos y significados están indicados abajo. • Please familiarise yourself with them before operating the machine. • Familiarícese con los símbolos antes de poner en marcha la máquina. Congratulations on
Summary of the content on the page No. 4
™ Rover Mowers Ltd GB OWNERS MANUAL - Powered Lawnmowers - Walk Behind ABN 11 000 257 303 Model Nos. 51, 61 & 80 SAFETY INSTRUCTIONS D GEBRAUCHSANWEISUNG - Motor-Rasenmäher - Modell Nr. 51, 61 & 80 TRAINING • Read the instructions carefully. Be familiar with the controls and the proper use of the equipment. F MANUEL DU PROPRIETAIRE - Tondeuse à Gazon à Essence - • Never allow children or people unfamiliar with these instructions to use the mower. Local regulations may restrict the Mod
Summary of the content on the page No. 5
PLATE 3 - backs plate 4 ™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 COMPONENTS OPERATION (Continued) GRASS CUTTING AND CATCHING •Ensure that all the following component parts are included in the package (refer figure 1): - Mower (1 off) - Kit including: Owners Manual (1 of) Engine Manual (1 of) Refer to and abide to the instructions noted in the safety instructions of this and associated manuals. Spark Plug Spanner (1 of) Screw - 3/16” x 1/2” UNC (2 of) WARNI
Summary of the content on the page No. 6
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 SETTING UP (Continued) OPERATION (Continued) REMOVING THE PACKAGING TIES FROM THE CONTROL HANDLES Installing the Grass catcher • Raise the rear flap of the mower. • Grasp the grass catcher by the top handle and position the grass catcher against the rear of the mower (refer figure 7). Remove and discard the packaging ties clamping the blade brake and self propelled drive • Lower the rear flap so that the back edge of the
Summary of the content on the page No. 7
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 SETTING UP (Continued) OPERATION (Continued) REMOVING THE PACKAGING TIES FROM THE CONTROL HANDLES Installing the Grass catcher • Raise the rear flap of the mower. • Grasp the grass catcher by the top handle and position the grass catcher against the rear of the mower (refer figure 7). Remove and discard the packaging ties clamping the blade brake and self propelled drive • Lower the rear flap so that the back edge of the
Summary of the content on the page No. 8
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 COMPONENTS OPERATION (Continued) GRASS CUTTING AND CATCHING •Ensure that all the following component parts are included in the package (refer figure 1): - Mower (1 off) - Kit including: Owners Manual (1 of) Engine Manual (1 of) Refer to and abide to the instructions noted in the safety instructions of this and associated manuals. Spark Plug Spanner (1 of) Screw - 3/16” x 1/2” UNC (2 of) WARNING Nyloc nut - 3/16” U
Summary of the content on the page No. 9
PLATE 5 - backs plate 6 ™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 MAINTENANCE (Continued) MAINTENANCE (Continued) Drive Belt Replacement (Continued) GENERAL CLEANING • Only if the mower is fitted with a full disc and blades will it be necessary to remove the cutting assembly by undoing the centre bolt and three surrounding bolts with suitable spanners. • If the mower is fitted with the “Inline Swing Back Blade” option, rotate both blades backward until the flute
Summary of the content on the page No. 10
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 MAINTENANCE (Continued) MAINTENANCE (Continued) Adjusting the Drive Cable (Continued) Drive Chain Adjustment • Start the mower in the disengaged position. • Push the drive bale forward until the gap between the bale and the handle bar is 55mm (refer figure 12). • Refer to the “Warning” and “Caution” notes at the beginning of the maintenance section. • The drive should just begin to engage at this point. • Keep the chain co
Summary of the content on the page No. 11
™ Rover Mowers Ltd Rover Mowers Ltd ABN 11 000 257 303 ABN 11 000 257 303 MAINTENANCE (Continued) MAINTENANCE (Continued) Adjusting the Drive Cable (Continued) Drive Chain Adjustment • Start the mower in the disengaged position. • Push the drive bale forward until the gap between the bale and the handle bar is 55mm (refer figure 12). • Refer to the “Warning” and “Caution” notes at the beginning of the maintenance section. • The drive should just begin to engage at this point. • Keep the chain co
